Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Stephan Gerhold <stephan@gerhold.net>
Date:   Thu, 15 Jun 2023 18:50:38 +0200
Subject: [PATCH v3 05/13] dt-bindings: remoteproc: glink-rpm-edge: Use
 "glink-edge" as node name
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-Id: <20230531-rpm-rproc-v3-5-a07dcdefd918@gerhold.net>
References: <20230531-rpm-rproc-v3-0-a07dcdefd918@gerhold.net>
In-Reply-To: <20230531-rpm-rproc-v3-0-a07dcdefd918@gerhold.net>
To:     Bjorn Andersson <andersson@kernel.org>
Cc:     Andy Gross <agross@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Mathieu Poirier <mathieu.poirier@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org,
        Stephan Gerhold <stephan@gerhold.net>
Precedence: bulk

Semantically glink-edge and glink-rpm-edge are similar: Both describe
the communication channels to a remote processor. The RPM glink-edge is
a special case that needs slightly different properties but otherwise
it is used exactly the same.

To improve consistency use the same "glink-edge" node name also for
glink-rpm-edge. Drop the $nodename from qcom,glink-edge.yaml to avoid
matching the wrong schema. qcom,glink-edge.yaml is always referenced
explicitly from other schemas. This will already ensure that the nodes
are being checked, so it's not necessary to bind to all nodes named
"glink-edge".

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml     | 3 ---
 Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml | 2 +-
 2 files changed, 1 insertion(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
index 7b43ad3daa56..e78a89c9ec41 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
@@ -14,9 +14,6 @@ description:
   related to the remote processor.
 
 properties:
-  $nodename:
-    const: glink-edge
-
   apr:
     $ref: /schemas/soc/qcom/qcom,apr.yaml#
     required:
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml
index f5a044e20c4e..884158bccd50 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml
@@ -84,7 +84,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    rpm-glink {
+    glink-edge {
         compatible = "qcom,glink-rpm";
         interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
         mboxes = <&apcs_glb 0>;

-- 
2.40.1