Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Lorenzo Pieralisi <lpieralisi@kernel.org>
To:     kw@linux.com, bhelgaas@google.com,
        Manivannan Sadhasivam <mani@kernel.org>
Cc:     Lorenzo Pieralisi <lpieralisi@kernel.org>, robh@kernel.org,
        andersson@kernel.org, konrad.dybcio@linaro.org,
        linux-pci@vger.kernel.org, linux-arm-msm@vger.kernel.org,
        linux-kernel@vger.kernel.org, steev@kali.org,
        quic_srichara@quicinc.com
Subject: Re: [PATCH v4 0/9] PCI: qcom: Do not advertise hotplug capability
Date:   Tue, 20 Jun 2023 12:13:50 +0200
Message-Id: <168725600736.54372.7257062051885655719.b4-ty@kernel.org>
In-Reply-To: <20230619150408.8468-1-manivannan.sadhasivam@linaro.org>
References: <20230619150408.8468-1-manivannan.sadhasivam@linaro.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
Precedence: bulk

On Mon, 19 Jun 2023 20:33:59 +0530, Manivannan Sadhasivam wrote:
> The SoCs making use of Qualcomm PCIe controllers do not support the PCIe hotplug
> functionality. But the hotplug capability bit is set by default in the hardware.
> This causes the kernel PCI core to register hotplug service for the controller
> and send hotplug commands to it. But those commands will timeout generating
> messages as below during boot and suspend/resume.
> 
> [    5.782159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago)
> [    5.810161] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2048 msec ago)
> [    7.838162] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2020 msec ago)
> [    7.870159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2052 msec ago)
> 
> [...]

Applied to controller/qcom, thanks!

[1/9] PCI: qcom: Disable write access to read only registers for IP v2.3.3
      https://git.kernel.org/pci/pci/c/a33d700e8eea
[2/9] PCI: qcom: Use DWC helpers for modifying the read-only DBI registers
      https://git.kernel.org/pci/pci/c/60f0072d7fb7
[3/9] PCI: qcom: Disable write access to read only registers for IP v2.9.0
      https://git.kernel.org/pci/pci/c/200b8f85f202
[4/9] PCI: qcom: Do not advertise hotplug capability for IPs v2.7.0 and v1.9.0
      https://git.kernel.org/pci/pci/c/a54db86ddc15
[5/9] PCI: qcom: Do not advertise hotplug capability for IPs v2.3.3 and v2.9.0
      https://git.kernel.org/pci/pci/c/11bce06b21a0
[6/9] PCI: qcom: Do not advertise hotplug capability for IP v2.3.2
      https://git.kernel.org/pci/pci/c/25966e78d303
[7/9] PCI: qcom: Use post init sequence of IP v2.3.2 for v2.4.0
      https://git.kernel.org/pci/pci/c/e35d13a5ff37
[8/9] PCI: qcom: Do not advertise hotplug capability for IP v1.0.0
      https://git.kernel.org/pci/pci/c/fa2dc2528684
[9/9] PCI: qcom: Do not advertise hotplug capability for IP v2.1.0
      https://git.kernel.org/pci/pci/c/1fdecc5bc8e8

Thanks,
Lorenzo