Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Benjamin Bara <bbara93@gmail.com>
Date:   Wed, 21 Jun 2023 16:26:28 +0200
Subject: [PATCH v2 2/3] usb: misc: onboard-hub: add support for Cypress HX3
 USB 3.0 family
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-Id: <20230620-hx3-v2-2-76a53434c713@skidata.com>
References: <20230620-hx3-v2-0-76a53434c713@skidata.com>
In-Reply-To: <20230620-hx3-v2-0-76a53434c713@skidata.com>
To:     Matthias Kaehlcke <mka@chromium.org>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Benjamin Bara <benjamin.bara@skidata.com>
Cc:     linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org
Precedence: bulk

From: Benjamin Bara <benjamin.bara@skidata.com>

The HX3 comes in different variants (up to 4 USB 3.0 ports; multi-TT),
e.g. CYUSB330x/CYUSB331x/CYUSB332x/CYUSB230x. It operates with two
different power supplies: 1V2 and 3V3.

Add the support for this hub, for controlling the reset pin and the
power supplies.

Reset time is extracted from data sheet, page 24:
"The RESETN pin can be tied to VDD_IO through an external resistor and
to ground (GND) through an external capacitor (minimum 5 ms time
constant)."
V_IH min is given at 0.7 * 3V3 (page 34), therefore use 10ms.

Also add USB PIDs for the USB 2.0 and USB 3.0 root hub.

Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
---
 drivers/usb/misc/onboard_usb_hub.c | 3 +++
 drivers/usb/misc/onboard_usb_hub.h | 7 +++++++
 2 files changed, 10 insertions(+)

diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c
index 3de30356a684..06e448b7e8cf 100644
--- a/drivers/usb/misc/onboard_usb_hub.c
+++ b/drivers/usb/misc/onboard_usb_hub.c
@@ -349,6 +349,7 @@ static struct platform_driver onboard_hub_driver = {
 
 /************************** USB driver **************************/
 
+#define VENDOR_ID_CYPRESS	0x04b4
 #define VENDOR_ID_GENESYS	0x05e3
 #define VENDOR_ID_MICROCHIP	0x0424
 #define VENDOR_ID_REALTEK	0x0bda
@@ -427,6 +428,8 @@ static void onboard_hub_usbdev_disconnect(struct usb_device *udev)
 }
 
 static const struct usb_device_id onboard_hub_id_table[] = {
+	{ USB_DEVICE(VENDOR_ID_CYPRESS, 0x6504) }, /* CYUSB33{0,1,2}x/CYUSB230x 3.0 */
+	{ USB_DEVICE(VENDOR_ID_CYPRESS, 0x6506) }, /* CYUSB33{0,1,2}x/CYUSB230x 2.0 */
 	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 */
 	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0610) }, /* Genesys Logic GL852G USB 2.0 */
 	{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2514) }, /* USB2514B USB 2.0 */
diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h
index 657190bf1799..145e476b1d6c 100644
--- a/drivers/usb/misc/onboard_usb_hub.h
+++ b/drivers/usb/misc/onboard_usb_hub.h
@@ -23,6 +23,11 @@ static const struct onboard_hub_pdata ti_tusb8041_data = {
 	.reset_us = 3000,
 };
 
+static const struct onboard_hub_pdata cypress_hx3_data = {
+	.reset_us = 10000,
+	.supplies_num = 2,
+};
+
 static const struct onboard_hub_pdata genesys_gl850g_data = {
 	.reset_us = 3,
 };
@@ -40,6 +45,8 @@ static const struct of_device_id onboard_hub_match[] = {
 	{ .compatible = "usb424,2517", .data = &microchip_usb424_data, },
 	{ .compatible = "usb451,8140", .data = &ti_tusb8041_data, },
 	{ .compatible = "usb451,8142", .data = &ti_tusb8041_data, },
+	{ .compatible = "usb4b4,6504", .data = &cypress_hx3_data, },
+	{ .compatible = "usb4b4,6506", .data = &cypress_hx3_data, },
 	{ .compatible = "usb5e3,608", .data = &genesys_gl850g_data, },
 	{ .compatible = "usb5e3,610", .data = &genesys_gl852g_data, },
 	{ .compatible = "usbbda,411", .data = &realtek_rts5411_data, },

-- 
2.34.1