Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@collabora.com>
To:     agross@kernel.org
Cc:     andersson@kernel.org, luca@z3ntu.xyz, konrad.dybcio@linaro.org,
        dmitry.baryshkov@linaro.org, joro@8bytes.org, will@kernel.org,
        robin.murphy@arm.com, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
        robdclark@gmail.com, linux-arm-msm@vger.kernel.org,
        iommu@lists.linux.dev, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@collabora.com>, kernel@collabora.com
Subject: [PATCH v5 0/6] Add support for Qualcomm's legacy IOMMU v2
Date:   Thu, 22 Jun 2023 11:27:36 +0200
Message-Id: <20230622092742.74819-1-angelogioacchino.delregno@collabora.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

This series adds support for handling "v2" firmware's IOMMU, found
on at least MSM8956 and MSM8976 (some other SoCs also need the same
but I honestly don't remember which ones precisely).

This is strictly required to get functional IOMMUs on these SoCs.

I'm sorry for not performing a much needed schema conversion on
qcom,iommu.txt, but I really didn't have time to do that :-(

This series was tested on Sony Xperia X and X Compact (MSM8956):
ADSP, LPASS, Venus, MSS, MDP and GPU are happy :-)

Changes in v5:
 - Renamed "qcom,ctx-num" to "qcom,ctx-asid" as suggested
   by Rob Herring

Changes in v4:
 - Rebase over next-20230619
 - Rewrite qcom,iommu.txt changes to qcom,iommu.yaml
 - Changed reset writes to only disable CB through CB_SCTLR
   and reset CB_FSR and CB_FAR
 - Addressed misc reviewer's comments

Changes in v3:
 - Removed useless FSRRESTORE reset and definition as pointed
   out in Robin Murphy's review
 - Fixed qcom,iommu.txt changes: squashed MSM8976 compatible
   string addition with msm-iommu-v2 generics addition

Changes in v2:
 - Added back Marijn's notes (sorry man!)
 - Added ARM_SMMU_CB_FSRRESTORE definition
 - Changed context bank reset to properly set FSR and FSRRESTORE

AngeloGioacchino Del Regno (6):
  dt-bindings: iommu: qcom,iommu: Add qcom,ctx-asid property
  iommu/qcom: Use the asid read from device-tree if specified
  iommu/qcom: Disable and reset context bank before programming
  iommu/qcom: Index contexts by asid number to allow asid 0
  dt-bindings: iommu: qcom,iommu: Add QSMMUv2 and MSM8976 compatibles
  iommu/qcom: Add support for QSMMUv2 and QSMMU-500 secured contexts

 .../devicetree/bindings/iommu/qcom,iommu.yaml | 22 +++++--
 drivers/iommu/arm/arm-smmu/qcom_iommu.c       | 62 ++++++++++++++-----
 2 files changed, 64 insertions(+), 20 deletions(-)

-- 
2.40.1