Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1765196AbXJTKz2 (ORCPT ); Sat, 20 Oct 2007 06:55:28 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1758044AbXJTKzI (ORCPT ); Sat, 20 Oct 2007 06:55:08 -0400 Received: from twin.jikos.cz ([213.151.79.26]:50244 "EHLO twin.jikos.cz" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757171AbXJTKzF (ORCPT ); Sat, 20 Oct 2007 06:55:05 -0400 Date: Sat, 20 Oct 2007 12:54:54 +0200 (CEST) From: Jiri Kosina To: Dave Haywood cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Pavel Emelyanov Subject: Re: PROBLEM: oops, Linus tree: 2.6.23-g4fa4d23f, BUG: unable to handle kernel NULL pointer dereference at virtual address 00000004 In-Reply-To: <4719B727.7090908@oak.selfip.net> Message-ID: References: <4719B727.7090908@oak.selfip.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 19892 Lines: 427 added some relevant CCs On Sat, 20 Oct 2007, Dave Haywood wrote: > BUG: unable to handle kernel NULL pointer dereference at virtual address 00000004 > > Linux s1 2.6.23-g4fa4d23f #4 Fri Oct 19 10:15:50 BST 2007 i686 Pentium III (Coppermine) GenuineIntel GNU/Linux > > Gnu C 4.2.0 > Gnu make 3.81 > binutils 2.18 > util-linux 2.12r > mount 2.12r > module-init-tools 3.2.2 > e2fsprogs 1.40.2 > PPP 2.4.4 > Linux C Library 2.6.1 > Dynamic linker (ldd) 2.6.1 > Procps 3.2.7 > Net-tools 1.60 > Kbd 1.13 > Sh-utils 6.9 > udev 115 > > Linux version 2.6.23-g4fa4d23f (tla@s1) (gcc version 4.2.0 (Gentoo 4.2.0 p1.4)) #4 Fri Oct 19 10:15:50 BST 2007 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000000fed0000 (usable) > BIOS-e820: 000000000fed0000 - 000000000fef0000 (ACPI NVS) > BIOS-e820: 000000000fef0000 - 000000000ff00000 (usable) > BIOS-e820: 00000000feea0000 - 0000000100000000 (reserved) > 0MB HIGHMEM available. > 255MB LOWMEM available. > found SMP MP-table at 000f9bf0 > Entering add_active_range(0, 0, 65280) 0 entries of 256 used > Zone PFN ranges: > DMA 0 -> 4096 > Normal 4096 -> 65280 > HighMem 65280 -> 65280 > Movable zone start PFN for each node > early_node_map[1] active PFN ranges > 0: 0 -> 65280 > On node 0 totalpages: 65280 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 4064 pages, LIFO batch:0 > Normal zone: 478 pages used for memmap > Normal zone: 60706 pages, LIFO batch:15 > HighMem zone: 0 pages used for memmap > Movable zone: 0 pages used for memmap > DMI 2.3 present. > Using APIC driver default > ACPI: RSDP 000E0010, 0014 (r0 COMPAQ) > ACPI: RSDT 000E0080, 0054 (r1 COMPAQ CPQ0014 20010612 0) > ACPI: FACP 000E0130, 0074 (r1 COMPAQ SOLANO 1 0) > ACPI: DSDT 000E0204, 0CE6 (r1 COMPAQ DSDT 1 MSFT 100000D) > ACPI: FACS 000E0040, 0040 > ACPI: SSDT 000E0EEA, 0174 (r1 COMPAQ CORE_UTL 1 MSFT 100000D) > ACPI: SSDT 000E105E, 0D3D (r1 COMPAQ VILLTBL1 1 MSFT 100000D) > ACPI: APIC 000E01A4, 0060 (r1 COMPAQ SOLANO 1 0) > ACPI: SSDT 000E2D4F, 0076 (r1 COMPAQ APIC 1 MSFT 100000D) > ACPI: SSDT 000E1D9B, 06AD (r1 COMPAQ PNP_PRSS 1 MSFT 100000D) > ACPI: SSDT 000E24A6, 01A4 (r1 COMPAQ S3 1 MSFT 100000D) > ACPI: SSDT 000E264A, 0158 (r1 COMPAQ PIDETM 1 MSFT 100000D) > ACPI: SSDT 000E28FF, 010B (r1 COMPAQ GTF0 1 MSFT 100000D) > ACPI: SSDT 000E27A2, 015D (r1 COMPAQ SIDETM 1 MSFT 100000D) > ACPI: SSDT 000E2B21, 0117 (r1 COMPAQ GTF2 1 MSFT 100000D) > ACPI: SSDT 000E2EAD, 004E (r1 COMPAQ FINIS 1 MSFT 100000D) > ACPI: PM-Timer IO Port: 0xf808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 6:8 APIC version 17 > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 10000000 (gap: 0ff00000:eefa0000) > swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 > swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 > swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 > swsusp: Registered nosave memory region: 000000000fed0000 - 000000000fef0000 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64770 > Kernel command line: root=/dev/md4 > mapped APIC to ffffb000 (fee00000) > mapped IOAPIC to ffffa000 (fec00000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > PID hash table entries: 1024 (order: 10, 4096 bytes) > Detected 930.368 MHz processor. > Console: colour VGA+ 80x25 > console [tty0] enabled > Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) > Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) > Memory: 252820k/261120k available (3213k kernel code, 7612k reserved, 1274k data, 264k init, 0k highmem) > virtual kernel memory layout: > fixmap : 0xfffa7000 - 0xfffff000 ( 352 kB) > pkmap : 0xff800000 - 0xffc00000 (4096 kB) > vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB) > lowmem : 0xc0000000 - 0xcff00000 ( 255 MB) > .init : 0xc0564000 - 0xc05a6000 ( 264 kB) > .data : 0xc04236bc - 0xc0561f08 (1274 kB) > .text : 0xc0100000 - 0xc04236bc (3213 kB) > Checking if this processor honours the WP bit even in supervisor mode... Ok. > SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 > Calibrating delay using timer specific routine.. 1862.06 BogoMIPS (lpj=3724128) > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000 > CPU: L1 I cache: 16K, L1 D cache: 16K > CPU: L2 cache: 256K > CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > Compat vDSO mapped to ffffe000. > CPU: Intel Pentium III (Coppermine) stepping 06 > Checking 'hlt' instruction... OK. > Freeing SMP alternatives: 0k freed > ACPI: Core revision 20070126 > Parsing all Control Methods: > Table [DSDT](id 0001) - 147 Objects with 18 Devices 32 Methods 2 Regions > Parsing all Control Methods: > Table [SSDT](id 0002) - 3 Objects with 0 Devices 3 Methods 0 Regions > Parsing all Control Methods: > Table [SSDT](id 0003) - 100 Objects with 9 Devices 23 Methods 5 Regions > Parsing all Control Methods: > Table [SSDT](id 0004) - 4 Objects with 1 Devices 1 Methods 0 Regions > Parsing all Control Methods: > Table [SSDT](id 0005) - 21 Objects with 0 Devices 10 Methods 1 Regions > Parsing all Control Methods: > Table [SSDT](id 0006) - 11 Objects with 0 Devices 8 Methods 0 Regions > Parsing all Control Methods: > Table [SSDT](id 0007) - 19 Objects with 1 Devices 5 Methods 2 Regions > Parsing all Control Methods: > Table [SSDT](id 0008) - 5 Objects with 1 Devices 3 Methods 0 Regions > Parsing all Control Methods: > Table [SSDT](id 0009) - 19 Objects with 1 Devices 5 Methods 2 Regions > Parsing all Control Methods: > Table [SSDT](id 000A) - 5 Objects with 1 Devices 3 Methods 0 Regions > Parsing all Control Methods: > Table [SSDT](id 000B) - 2 Objects with 0 Devices 2 Methods 0 Regions > tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired > evxfevnt-0091 [00] enable : Transition to ACPI mode successful > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > net_namespace: 64 bytes > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: PCI BIOS revision 2.10 entry at 0xe8316, last bus=2 > PCI: Using configuration type 1 > Setting up standard PCI resources > evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9 > evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block > ACPI: EC: Look up EC in DSDT > Completing Region/Field/Buffer/Package initialization:............................................ > Initialized 8/12 Regions 0/0 Fields 31/31 Buffers 5/12 Packages (345 nodes) > Initializing Device/Processor/Thermal objects by executing _INI methods:. > Executed 1 _INI methods requiring 0 _STA executions (examined 35 objects) > ACPI: Interpreter enabled > ACPI: (supports S0 S1 S3 S4 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO > PCI quirk: region fa00-fa3f claimed by ICH4 GPIO > PCI: Transparent bridge - 0000:00:1e.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 14 15) *9 > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15) > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 15 devices > ACPI: ACPI bus type pnp unregistered > SCSI subsystem initialized > libata version 3.00 loaded. > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > Time: tsc clocksource has been installed. > system 00:0c: ioport range 0x4d0-0x4d1 has been reserved > system 00:0d: ioport range 0x400-0x41f has been reserved > system 00:0d: ioport range 0x420-0x43f has been reserved > system 00:0d: ioport range 0x440-0x45f has been reserved > system 00:0d: ioport range 0x460-0x47f has been reserved > system 00:0d: ioport range 0xf800-0xf81f has been reserved > system 00:0d: ioport range 0xf820-0xf83f has been reserved > system 00:0d: ioport range 0xf840-0xf85f has been reserved > system 00:0d: ioport range 0xf860-0xf87f has been reserved > system 00:0e: iomem range 0x0-0x9ffff could not be reserved > system 00:0e: iomem range 0xe0000-0xfffff could not be reserved > system 00:0e: iomem range 0x100000-0xfefffff could not be reserved > system 00:0e: iomem range 0xfff80000-0xffffffff could not be reserved > PCI: Bridge: 0000:00:1e.0 > IO window: 1000-1fff > MEM window: 40000000-407fffff > PREFETCH window: disabled. > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 2048 (order: 1, 8192 bytes) > TCP established hash table entries: 8192 (order: 4, 65536 bytes) > TCP bind hash table entries: 8192 (order: 3, 32768 bytes) > TCP: Hash tables configured (established 8192 bind 8192) > TCP reno registered > Machine check exception polling timer started. > IA-32 Microcode Update Driver: v1.14a > Total HugeTLB memory allocated, 0 > io scheduler noop registered > io scheduler cfq registered (default) > Boot video device is 0000:00:02.0 > input: Power Button (FF) as /devices/virtual/input/input0 > ACPI: Power Button (FF) [PWRF] > input: Power Button (CM) as /devices/virtual/input/input1 > ACPI: Power Button (CM) [PBTN] > ACPI: Processor [CPU0] (supports 8 throttling states) > Real Time Clock Driver v1.12ac > intel_rng: FWH not detected > Linux agpgart interface v0.102 > agpgart: Detected an Intel i815 Chipset. > agpgart: AGP aperture is 64M @ 0x44000000 > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > FDC 0 is a post-1991 82077 > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > loop: module loaded > Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 > Copyright (c) 1999-2006 Intel Corporation. > e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI > e100: Copyright(c) 1999-2006 Intel Corporation > 8139too Fast Ethernet driver 0.9.28 > ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 16 > eth0: RealTek RTL8139 at 0xd0816000, 00:05:5d:49:eb:21, IRQ 16 > eth0: Identified 8139 chip type 'RTL-8139C' > ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 18 (level, low) -> IRQ 17 > eth1: RealTek RTL8139 at 0xd0818000, 00:10:b5:ac:ea:7d, IRQ 17 > eth1: Identified 8139 chip type 'RTL-8139B' > console [netcon0] enabled > netconsole: network logging started > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > ICH: IDE controller at PCI slot 0000:00:1f.1 > ICH: chipset revision 2 > ICH: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x2460-0x2467, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0x2468-0x246f, BIOS settings: hdc:DMA, hdd:pio > Probing IDE interface ide0... > Switched to high resolution mode on CPU 0 > hda: Maxtor 6G160P0, ATA DISK drive > hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 > hda: selected mode 0x44 > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > hdc: Maxtor 6G160P0, ATA DISK drive > hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 > hdc: selected mode 0x44 > ide1 at 0x170-0x177,0x376 on irq 15 > hda: max request size: 512KiB > hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(66) > hda: cache flushes supported > hda: hda1 hda2 hda3 hda4 > hdc: max request size: 512KiB > hdc: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(66) > hdc: cache flushes supported > hdc: hdc1 hdc2 hdc3 hdc4 > Fusion MPT base driver 3.04.06 > Copyright (c) 1999-2007 LSI Corporation > Fusion MPT SPI Host driver 3.04.06 > ieee1394: raw1394: /dev/raw1394 device initialized > usbmon: debugfs is not available > ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver > USB Universal Host Controller Interface driver v3.0 > ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > uhci_hcd 0000:00:1f.2: UHCI Host Controller > uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 > uhci_hcd 0000:00:1f.2: irq 18, io base 0x00002440 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > usbcore: registered new interface driver usblp > Initializing USB Mass Storage driver... > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 > md: raid1 personality registered for level 1 > usbcore: registered new interface driver usbhid > drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver > Netfilter messages via NETLINK v0.30. > nf_conntrack version 0.5.0 (4096 buckets, 16384 max) > ctnetlink v0.93: registering with nfnetlink. > ip_tables: (C) 2000-2006 Netfilter Core Team > ClusterIP Version 0.8 loaded successfully > arp_tables: (C) 2002 David S. Miller > TCP cubic registered > NET: Registered protocol family 1 > NET: Registered protocol family 10 > ip6_tables: (C) 2000-2006 Netfilter Core Team > IPv6 over IPv4 tunneling driver > NET: Registered protocol family 17 > Using IPI Shortcut mode > input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3 > md: Autodetecting RAID arrays. > md: Scanned 8 and added 8 devices. > md: autorun ... > md: considering hdc4 ... > md: adding hdc4 ... > md: hdc3 has different UUID to hdc4 > md: hdc2 has different UUID to hdc4 > md: hdc1 has different UUID to hdc4 > md: adding hda4 ... > md: hda3 has different UUID to hdc4 > md: hda2 has different UUID to hdc4 > md: hda1 has different UUID to hdc4 > md: created md4 > md: bind > md: bind > md: running: > raid1: raid set md4 active with 2 out of 2 mirrors > md4: bitmap initialized from disk: read 11/11 pages, set 6 bits > created bitmap (169 pages) for device md4 > md: considering hdc3 ... > md: adding hdc3 ... > md: hdc2 has different UUID to hdc3 > md: hdc1 has different UUID to hdc3 > md: adding hda3 ... > md: hda2 has different UUID to hdc3 > md: hda1 has different UUID to hdc3 > md: created md3 > md: bind > md: bind > md: running: > raid1: raid set md3 active with 2 out of 2 mirrors > md3: bitmap initialized from disk: read 15/15 pages, set 0 bits > created bitmap (233 pages) for device md3 > md: considering hdc2 ... > md: adding hdc2 ... > md: hdc1 has different UUID to hdc2 > md: adding hda2 ... > md: hda1 has different UUID to hdc2 > md: created md2 > md: bind > md: bind > md: running: > raid1: raid set md2 active with 2 out of 2 mirrors > md2: bitmap initialized from disk: read 8/8 pages, set 0 bits > created bitmap (123 pages) for device md2 > md: considering hdc1 ... > md: adding hdc1 ... > md: adding hda1 ... > md: created md1 > md: bind > md: bind > md: running: > raid1: raid set md1 active with 2 out of 2 mirrors > md1: bitmap initialized from disk: read 10/10 pages, set 0 bits > created bitmap (153 pages) for device md1 > md: ... autorun DONE. > EXT3-fs: INFO: recovery required on readonly filesystem. > EXT3-fs: write access will be enabled during recovery. > kjournald starting. Commit interval 5 seconds > EXT3-fs: recovery complete. > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly. > Freeing unused kernel memory: 264k freed > EXT3 FS on md4, internal journal > kjournald starting. Commit interval 5 seconds > EXT3 FS on md3, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > Adding 1999992k swap on /dev/md2. Priority:-1 extents:1 across:1999992k > eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 > eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 > eth0: no IPv6 routers present > eth1: no IPv6 routers present > BUG: unable to handle kernel NULL pointer dereference at virtual address 00000004 > printing eip: c0383fa0 *pde = 00000000 > Oops: 0000 [#1] > CPU: 0 > EIP: 0060:[] Not tainted VLI > EFLAGS: 00010282 (2.6.23-g4fa4d23f #4) > EIP is at sk_filter_delayed_uncharge+0x0/0x20 > eax: c5dfb600 ebx: 00000000 ecx: 00000000 edx: 00000000 > esi: c5dfb600 edi: 00000000 ebp: c170d300 esp: c5dcbef8 > ds: 007b es: 007b fs: 0000 gs: 0033 ss: 0068 > Process dhcpd (pid: 5380, ti=c5dca000 task=c47f0520 task.ti=c5dca000) > Stack: c038410f 00000068 00000058 c5dcbf34 b7fd000b c1b75000 c5dfb600 c0371d19 > c1b70fd8 c180d300 c1b70f80 00000007 00000001 b7fd000b c170d900 b7fd000b > 080c9fa0 0000000e 00000000 c5dcbf6c c036dbc2 0000000e c1b75000 00000008 > Call Trace: > [] sk_attach_filter+0xdf/0x100 > [] sock_setsockopt+0x509/0x590 > [] sockfd_lookup_light+0x32/0x60 > [] sys_setsockopt+0x9b/0xb0 > [] sys_socketcall+0xd5/0x280 > [] sysenter_past_esp+0x5f/0x85 > ======================= > Code: cb 04 76 c7 83 c1 01 83 ee 01 39 d1 75 8d eb d7 83 7c cb 04 0f 77 b4 83 c1 01 83 ee 01 39 d1 0f 85 76 ff ff ff eb c0 8d 74 26 00 <8b> 4a 04 8d 0c cd 10 00 00 00 29 48 5c 8d 42 08 ba 10 40 38 c0 > EIP: [] sk_filter_delayed_uncharge+0x0/0x20 SS:ESP 0068:c5dcbef8 > > > -- Jiri Kosina - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/