Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Johan Hovold <johan+linaro@kernel.org>
To:     Bjorn Andersson <andersson@kernel.org>
Cc:     Andy Gross <agross@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Johan Hovold <johan+linaro@kernel.org>,
        Patrick Wildt <patrick@blueri.se>
Subject: [PATCH] arm64: dts: qcom: sc8280xp-pmics: add explicit rtc interrupt parent
Date:   Tue, 27 Jun 2023 10:53:06 +0200
Message-Id: <20230627085306.6033-1-johan+linaro@kernel.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Unless explicitly specified the interrupt-parent property is inherited
from the parent node on Linux even though this may not be in full
compliance with the devicetree specification.

Following commit 2d5cab9232ba ("arm64: dts: qcom: sc8280xp-pmics:
Specify interrupt parent explicitly"), add an explicit interrupt parent
also for the PMIC RTC node for the benefit of other operating systems
which may be confused by this omission.

Note that any such OS must still implement a fallback to the root
interrupt domain as most devicetrees are written under the assumption
that the interrupt parent is inherited.

Reported-by: Patrick Wildt <patrick@blueri.se>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index a0ba535bb6c9..80ee12ded4f4 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -101,7 +101,7 @@ pmk8280_rtc: rtc@6100 {
 			compatible = "qcom,pmk8350-rtc";
 			reg = <0x6100>, <0x6200>;
 			reg-names = "rtc", "alarm";
-			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+			interrupts-extended = <&spmi_bus 0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
 			wakeup-source;
 			status = "disabled";
 		};
-- 
2.39.3