Received: by 2002:a05:6358:3188:b0:123:57c1:9b43 with SMTP id q8csp19230412rwd; Wed, 28 Jun 2023 06:50:40 -0700 (PDT) X-Google-Smtp-Source: ACHHUZ6ihPAKH1z++sDOyUgNKu+QXzkc3mvgTtE1St7luSldedkYtfab4GPZHjjYeMQkrraptJJP X-Received: by 2002:a2e:980d:0:b0:2b6:9d02:ab86 with SMTP id a13-20020a2e980d000000b002b69d02ab86mr6131577ljj.33.1687960240371; Wed, 28 Jun 2023 06:50:40 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1687960240; cv=none; d=google.com; s=arc-20160816; b=JF++agGW4DISYIxv38bcF7vOUSbLip/OhqCx0mCbZlqIzVRHdxpIYHO8pWVM+ghozw S1cR/7apXs31V/KqbeyXXRCDPcDmG70GFeLRFybZ0CuZ2Bnw5awowHQ71UMfNoob6Hmx 8Lx3zf2eehOJj+p1VqJ6KBQR1XEB/Gpd4WH5gCkNYkJmzm3lg1PX8nP+dE8jwUJsYGNn igJyztO3/wTyvAUVJiwuGey4j5L7FHGrqvcznR3WKCZFQsItwzOtr0hjDRGUQEH7AMj7 hSO/zrp5zOe+55hz4vSUimXDAIrfS8FpKcMkxiRmX04kzHRWwq2c2WpP9Gs38b6pGZx4 /+9w== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=hUwJiYBTmeGKg3r+XmGJW7kd4hHxhjkXy45P+ORmOC4=; fh=ljIJXa/02WWeFdEyWsNa3R9UMHHsPyI4Sfxsawa6K6M=; b=euLH32dqNfX61pui2NjKnePt7ITM8FCJrTz7NwsirF2jajSbwkNlECllCPllTugH9G lN7yl+hKuvIJJH1QAXQ8wVgLQnO1dNQXtEfP8PMXxh1dtW7vyXhOEVn3rE4BSG5VQ1G1 mT4i8yAJ8HCudNk2RCnurwVjj/PzZMPP7G/67D3O46RZ/Z+rXuvM2L+S1WJI1kQvgdU3 OOkISCwpGBN1Ru/91lAOxSlOP3e0QxUkDTBILu8jj13p4TeKKOjHdd7y/7KKkQY9Ns2u EXvAD0ok2Rh5Lw1i1ZqLe57NaidcO+zpD/1AguCakr0riz5dW+0zwS3lIlJcKzywZOw5 2FCg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@baylibre-com.20221208.gappssmtp.com header.s=20221208 header.b=sGY+1h52; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id y18-20020a17090614d200b0098e0a14c671si5046927ejc.614.2023.06.28.06.50.15; Wed, 28 Jun 2023 06:50:40 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@baylibre-com.20221208.gappssmtp.com header.s=20221208 header.b=sGY+1h52; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232124AbjF1Niy (ORCPT + 99 others); Wed, 28 Jun 2023 09:38:54 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48538 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231820AbjF1Nin (ORCPT ); Wed, 28 Jun 2023 09:38:43 -0400 Received: from mail-wm1-x32d.google.com (mail-wm1-x32d.google.com [IPv6:2a00:1450:4864:20::32d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D777D10D5 for ; Wed, 28 Jun 2023 06:38:40 -0700 (PDT) Received: by mail-wm1-x32d.google.com with SMTP id 5b1f17b1804b1-3fa93d61d48so41117155e9.0 for ; Wed, 28 Jun 2023 06:38:40 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20221208.gappssmtp.com; s=20221208; t=1687959519; x=1690551519; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=hUwJiYBTmeGKg3r+XmGJW7kd4hHxhjkXy45P+ORmOC4=; b=sGY+1h52GJutsrC6v3qewEwIoyYGR9iDTqkXz66oaARKwSCJwn4jahH7AHApWk8hwG FBHYKA5ttmdCp3QquqkGStWRWDyfRbKV4WHc7OvSvd+VnAE6aoF3Jq13L4/SDerCw1yW uaY7A3KEM8vJFsJulMrJVxBHBtiMQbHpQVSYUpiCSv482kjhDPuZJtbtuHhNabt+9yFq QGTnNknH06yZxx28LVDd8pwibE/cQg4s906xx4729DJc/tBcCWcuSLqfpezTPWuVciKt /SeYHNEzXQ8frpW0ZkONSYA7xLYxEXnmu5644b64RHKlGAft2ysrjyxkb9SrQIAJLX3h 0i/w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1687959519; x=1690551519; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=hUwJiYBTmeGKg3r+XmGJW7kd4hHxhjkXy45P+ORmOC4=; b=btf+5CdffsENesa3WDeg1sO0WIiEsaOYILcYwMk5z4G4vEfQ5iZDDWa39XhwiAxRiC o2G0XIlUXzjcc+tp9zm3vp2oC97+uj4CcUXvd3vd/5N/hOXaeLBI/ooWmhYic85C3DX2 Q3hebGDsOW+Zh3ZEPPnXslOmqbmWTkZKJLvC0zJgIsgO0WKNIfJ7YbLYDw6IXflfMiYE 89of/wTKthDtmae10Wk3yEIhuSbAjLBsZPp4EXV51w/goL+rxrSLbsVbgQ1xkCiPrLSQ JNDug3ZAj0/ScCpcTp0kLlDZzBD/xS6G09BomedK8wzhLztLwvt7drNtk4PqkNYJdBmq DBDA== X-Gm-Message-State: AC+VfDxshQ6UtjcqdXh9Erv5FWd5dvPdDYgSpnr+8wuBNwmhATtnEb8B vCPe0k6rU1O4fqrutScuReKCwmk8bpx8E3SM5Ww= X-Received: by 2002:a05:600c:2111:b0:3fb:ad60:eae9 with SMTP id u17-20020a05600c211100b003fbad60eae9mr2184101wml.16.1687959519329; Wed, 28 Jun 2023 06:38:39 -0700 (PDT) Received: from localhost.localdomain (laubervilliers-658-1-213-31.w90-63.abo.wanadoo.fr. [90.63.244.31]) by smtp.googlemail.com with ESMTPSA id o23-20020a05600c379700b003fae92e7a8dsm7657539wmr.27.2023.06.28.06.38.38 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 28 Jun 2023 06:38:39 -0700 (PDT) From: Corentin Labbe To: gregkh@linuxfoundation.org, johan@kernel.org Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, david@ixit.cz, Corentin Labbe Subject: [PATCH v6 1/2] usb: serial: add support for CH348 Date: Wed, 28 Jun 2023 13:38:33 +0000 Message-Id: <20230628133834.1527941-2-clabbe@baylibre.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20230628133834.1527941-1-clabbe@baylibre.com> References: <20230628133834.1527941-1-clabbe@baylibre.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,RCVD_IN_DNSWL_NONE,SPF_HELO_NONE,SPF_PASS, T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The CH348 is an USB octo port serial adapter. The device multiplexes all 8 ports in the same pair of Bulk endpoints. Since there is no public datasheet, unfortunately it remains some magic values Signed-off-by: Corentin Labbe --- drivers/usb/serial/Kconfig | 9 + drivers/usb/serial/Makefile | 1 + drivers/usb/serial/ch348.c | 491 ++++++++++++++++++++++++++++++++++++ 3 files changed, 501 insertions(+) create mode 100644 drivers/usb/serial/ch348.c diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index ef8d1c73c754..1e1842656b54 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -112,6 +112,15 @@ config USB_SERIAL_CH341 To compile this driver as a module, choose M here: the module will be called ch341. +config USB_SERIAL_CH348 + tristate "USB Winchiphead CH348 Octo Port Serial Driver" + help + Say Y here if you want to use a Winchiphead CH348 octo port + USB to serial adapter. + + To compile this driver as a module, choose M here: the + module will be called ch348. + config USB_SERIAL_WHITEHEAT tristate "USB ConnectTech WhiteHEAT Serial Driver" select USB_EZUSB_FX2 diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index c7bb1a88173e..d16ff59fde68 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_USB_SERIAL_AIRCABLE) += aircable.o obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o obj-$(CONFIG_USB_SERIAL_CH341) += ch341.o +obj-$(CONFIG_USB_SERIAL_CH348) += ch348.o obj-$(CONFIG_USB_SERIAL_CP210X) += cp210x.o obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o obj-$(CONFIG_USB_SERIAL_CYPRESS_M8) += cypress_m8.o diff --git a/drivers/usb/serial/ch348.c b/drivers/usb/serial/ch348.c new file mode 100644 index 000000000000..f89ef554954f --- /dev/null +++ b/drivers/usb/serial/ch348.c @@ -0,0 +1,491 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * USB serial driver for USB to Octal UARTs chip ch348. + * + * Copyright (C) 2022 Corentin Labbe + * With the help of Neil Armstrong + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DEFAULT_BAUD_RATE 9600 +#define CH348_CMD_TIMEOUT 2000 + +#define CH348_CTO_D 0x01 +#define CH348_CTO_R 0x02 + +#define CH348_CTI_C 0x10 +#define CH348_CTI_DSR 0x20 +#define CH348_CTI_R 0x40 +#define CH348_CTI_DCD 0x80 + +#define CH348_LO 0x02 +#define CH348_LP 0x04 +#define CH348_LF 0x08 +#define CH348_LB 0x10 + +#define CMD_W_R 0xC0 +#define CMD_W_BR 0x80 + +#define CMD_WB_E 0x90 +#define CMD_RB_E 0xC0 + +#define M_NOR 0x00 +#define M_HF 0x03 + +#define R_MOD 0x97 +#define R_IO_D 0x98 +#define R_IO_O 0x99 +#define R_IO_I 0x9b +#define R_TM_O 0x9c +#define R_INIT 0xa1 + +#define R_C1 0x01 +#define R_C2 0x02 +#define R_C4 0x04 +#define R_C5 0x06 + +#define R_II_B1 0x06 +#define R_II_B2 0x02 +#define R_II_B3 0x00 + +#define CH348_RX_PORT_CHUNK_LENGTH 32 +#define CH348_RX_PORT_MAX_LENGTH 30 + +struct ch348_rxbuf { + u8 port; + u8 length; + u8 data[CH348_RX_PORT_MAX_LENGTH]; +} __packed; + +struct ch348_txbuf { + u8 port; + __le16 length; + u8 data[]; +} __packed; + +#define CH348_TX_HDRSIZE offsetof(struct ch348_txbuf, data) + +struct ch348_initbuf { + u8 cmd; + u8 reg; + u8 port; + __be32 baudrate; + u8 format; + u8 paritytype; + u8 databits; + u8 rate; + u8 unknown; +} __packed; + +#define CH348_MAXPORT 8 + +/* + * The CH348 multiplexes rx & tx into a pair of Bulk USB endpoints for + * the 8 serial ports, and another pair of Bulk USB endpoints to + * set port settings and receive port status events. + * + * The USB serial cores ties every Bulk endpoints pairs to each ports, + * but in our case it will set port 0 with the rx/tx endpoints + * and port 1 with the setup/status endpoints. + * + * To still take advantage of the generic code, we (re-)initialize + * the USB serial port structure with the correct USB endpoint + * for read and write, and write proper process_read_urb() + * and prepare_write_buffer() to correctly (de-)multiplex data. + */ + +/* + * struct ch348_port - per-port information + * @uartmode: UART port current mode + */ +struct ch348_port { + u8 uartmode; +}; + +/* + * struct ch348 - main container for all this driver information + * @udev: pointer to the CH348 USB device + * @ports: List of per-port information + * @serial: pointer to the serial structure + * @status_ep: endpoint number for status operations + * @cmd_ep: endpoint number for configure operations + * @status_urb: URB for status + * @status_buffer: buffer used by status_urb + */ +struct ch348 { + struct usb_device *udev; + struct ch348_port ports[CH348_MAXPORT]; + struct usb_serial *serial; + + int status_ep; + int cmd_ep; + + struct urb *status_urb; + u8 *status_buffer; +}; + +struct ch348_magic { + u8 action; + u8 reg; + u8 control; +} __packed; + +/* + * Some values came from vendor tree, and we have no meaning for them, this + * function simply use them. + */ +static int ch348_do_magic(struct ch348 *ch348, int portnum, u8 action, u8 reg, u8 control) +{ + struct ch348_magic *buffer; + int ret, len; + + buffer = kzalloc(sizeof(*buffer), GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + if (portnum < 4) + reg += 0x10 * portnum; + else + reg += 0x10 * (portnum - 4) + 0x08; + + buffer->action = action; + buffer->reg = reg; + buffer->control = control; + + ret = usb_bulk_msg(ch348->udev, ch348->cmd_ep, buffer, 3, &len, + CH348_CMD_TIMEOUT); + if (ret) + dev_err(&ch348->udev->dev, "Failed to write magic err=%d\n", ret); + + kfree(buffer); + + return ret; +} + +static int ch348_configure(struct ch348 *ch348, int portnum) +{ + int ret; + + ret = ch348_do_magic(ch348, portnum, CMD_W_R, R_C2, 0x87); + if (ret) + return ret; + + return ch348_do_magic(ch348, portnum, CMD_W_R, R_C4, 0x08); +} + +static void ch348_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct ch348 *ch348 = usb_get_serial_data(port->serial); + unsigned int portnum, usblen; + struct ch348_rxbuf *rxb; + u8 *buffer, *end; + + buffer = urb->transfer_buffer; + + if (urb->actual_length < 2) { + dev_dbg(&port->dev, "Empty rx buffer\n"); + return; + } + + end = buffer + urb->actual_length; + + for (; buffer < end; buffer += CH348_RX_PORT_CHUNK_LENGTH) { + rxb = (struct ch348_rxbuf *)buffer; + portnum = rxb->port; + if (portnum >= CH348_MAXPORT) { + dev_dbg(&port->dev, "Invalid port %d\n", portnum); + break; + } + + port = ch348->serial->port[portnum]; + + usblen = rxb->length; + if (usblen > CH348_RX_PORT_MAX_LENGTH) { + dev_dbg(&port->dev, "Invalid length %d for port %d\n", + usblen, portnum); + break; + } + + tty_insert_flip_string(&port->port, rxb->data, usblen); + tty_flip_buffer_push(&port->port); + port->icount.rx += usblen; + usb_serial_debug_data(&port->dev, __func__, usblen, rxb->data); + } +} + +static int ch348_prepare_write_buffer(struct usb_serial_port *port, void *dest, size_t size) +{ + struct ch348_txbuf *rxt = dest; + int count; + + count = kfifo_out_locked(&port->write_fifo, rxt->data, + size - CH348_TX_HDRSIZE, &port->lock); + + rxt->port = port->port_number; + rxt->length = cpu_to_le16(count); + + return count + CH348_TX_HDRSIZE; +} + +static int ch348_set_uartmode(struct ch348 *ch348, int portnum, u8 index, u8 mode) +{ + int ret; + + if (ch348->ports[portnum].uartmode == M_NOR && mode == M_HF) { + ret = ch348_do_magic(ch348, portnum, CMD_W_BR, R_C4, 0x51); + if (ret) + return ret; + ch348->ports[portnum].uartmode = M_HF; + } + + if (ch348->ports[portnum].uartmode == M_HF && mode == M_NOR) { + ret = ch348_do_magic(ch348, portnum, CMD_W_BR, R_C4, 0x50); + if (ret) + return ret; + ch348->ports[portnum].uartmode = M_NOR; + } + return 0; +} + +static void ch348_set_termios(struct tty_struct *tty, struct usb_serial_port *port, + const struct ktermios *termios_old) +{ + struct ch348 *ch348 = usb_get_serial_data(port->serial); + int portnum = port->port_number; + struct ktermios *termios = &tty->termios; + int ret, sent; + speed_t baudrate; + u8 format; + struct ch348_initbuf *buffer; + + if (termios_old && !tty_termios_hw_change(&tty->termios, termios_old)) + return; + + buffer = kzalloc(sizeof(*buffer), GFP_KERNEL); + if (!buffer) { + if (termios_old) + tty->termios = *termios_old; + return; + } + + baudrate = tty_get_baud_rate(tty); + /* test show no success on low baud and datasheet said it is not supported */ + if (baudrate < 1200) + baudrate = DEFAULT_BAUD_RATE; + /* datasheet said it is not supported */ + if (baudrate > 6000000) + baudrate = 6000000; + + format = termios->c_cflag & CSTOPB ? 2 : 1; + + buffer->paritytype = 0; + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & PARODD) + buffer->paritytype += 1; + else + buffer->paritytype += 2; + if (termios->c_cflag & CMSPAR) + buffer->paritytype += 2; + } + + switch (C_CSIZE(tty)) { + case CS5: + buffer->databits = 5; + break; + case CS6: + buffer->databits = 6; + break; + case CS7: + buffer->databits = 7; + break; + case CS8: + default: + buffer->databits = 8; + break; + } + buffer->cmd = CMD_WB_E | (portnum & 0x0F); + buffer->reg = R_INIT; + buffer->port = portnum; + buffer->baudrate = cpu_to_be32(baudrate); + + if (format == 2) + buffer->format = 0x02; + else if (format == 1) + buffer->format = 0x00; + + buffer->rate = max_t(speed_t, 5, DIV_ROUND_CLOSEST(10000 * 15, baudrate)); + + ret = usb_bulk_msg(ch348->udev, ch348->cmd_ep, buffer, + sizeof(*buffer), &sent, CH348_CMD_TIMEOUT); + if (ret < 0) { + dev_err(&ch348->udev->dev, "Failed to change line settings: err=%d\n", + ret); + goto out; + } + + ret = ch348_do_magic(ch348, portnum, CMD_W_R, R_C1, 0x0F); + if (ret < 0) + goto out; + + if (C_CRTSCTS(tty)) + ret = ch348_set_uartmode(ch348, portnum, portnum, M_HF); + else + ret = ch348_set_uartmode(ch348, portnum, portnum, M_NOR); + +out: + kfree(buffer); +} + +static int ch348_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct ch348 *ch348 = usb_get_serial_data(port->serial); + int ret; + + if (tty) + ch348_set_termios(tty, port, NULL); + + ret = ch348_configure(ch348, port->port_number); + if (ret) { + dev_err(&ch348->udev->dev, "Fail to configure err=%d\n", ret); + return ret; + } + + return usb_serial_generic_open(tty, port); +} + +static void ch348_disconnect(struct usb_serial *serial) +{ + struct ch348 *ch348 = usb_get_serial_data(serial); + + usb_kill_urb(ch348->status_urb); +} + +static int ch348_attach(struct usb_serial *serial) +{ + struct usb_serial_port *port0 = serial->port[1]; + struct usb_device *usb_dev = serial->dev; + struct usb_endpoint_descriptor *epcmd; + struct usb_interface *intf; + struct ch348 *ch348; + int ret; + + ch348 = kzalloc(sizeof(*ch348), GFP_KERNEL); + if (!ch348) + return -ENOMEM; + + usb_set_serial_data(serial, ch348); + + ch348->udev = serial->dev; + ch348->serial = serial; + + intf = usb_ifnum_to_if(usb_dev, 0); + epcmd = &intf->cur_altsetting->endpoint[3].desc; + ret = usb_serial_generic_submit_read_urbs(port0, GFP_KERNEL); + if (ret) + return ret; + + ch348->cmd_ep = usb_sndbulkpipe(usb_dev, epcmd->bEndpointAddress); + + return 0; +} + +static void ch348_release(struct usb_serial *serial) +{ + struct ch348 *ch348 = usb_get_serial_data(serial); + struct usb_serial_port *port0 = serial->port[1]; + + usb_serial_generic_close(port0); + + kfree(ch348); +} + +static int ch348_probe(struct usb_serial *serial, const struct usb_device_id *id) +{ + struct usb_device *usb_dev = serial->dev; + struct usb_endpoint_descriptor *epcmd; + struct usb_endpoint_descriptor *epread; + struct usb_endpoint_descriptor *epwrite; + struct usb_interface *intf; + int ret; + + intf = usb_ifnum_to_if(usb_dev, 0); + + ret = usb_find_common_endpoints(intf->cur_altsetting, &epread, &epwrite, + NULL, NULL); + if (ret) { + dev_err(&serial->dev->dev, "Failed to find basic endpoints ret=%d\n", ret); + return ret; + } + epcmd = &intf->cur_altsetting->endpoint[3].desc; + + if (!usb_endpoint_is_bulk_out(epcmd)) { + dev_err(&serial->dev->dev, "Missing second bulk out\n"); + return -ENODEV; + } + + return 0; +} + +static int ch348_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) +{ + int i; + + for (i = 1; i < CH348_MAXPORT; ++i) { + epds->bulk_out[i] = epds->bulk_out[0]; + epds->bulk_in[i] = epds->bulk_in[0]; + } + epds->num_bulk_out = CH348_MAXPORT; + epds->num_bulk_in = CH348_MAXPORT; + + return CH348_MAXPORT; +} + +static const struct usb_device_id ch348_ids[] = { + { USB_DEVICE(0x1a86, 0x55d9), }, + { } +}; + +MODULE_DEVICE_TABLE(usb, ch348_ids); + +static struct usb_serial_driver ch348_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ch348", + }, + .id_table = ch348_ids, + .num_ports = CH348_MAXPORT, + .num_bulk_in = 1, + .num_bulk_out = 2, + .open = ch348_open, + .set_termios = ch348_set_termios, + .process_read_urb = ch348_process_read_urb, + .prepare_write_buffer = ch348_prepare_write_buffer, + .probe = ch348_probe, + .calc_num_ports = ch348_calc_num_ports, + .attach = ch348_attach, + .release = ch348_release, + .disconnect = ch348_disconnect, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &ch348_device, NULL +}; + +module_usb_serial_driver(serial_drivers, ch348_ids); + +MODULE_AUTHOR("Corentin Labbe "); +MODULE_DESCRIPTION("USB CH348 Octo port serial converter driver"); +MODULE_LICENSE("GPL"); -- 2.39.3