Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Astrid Rost <astrid.rost@axis.com>
To:     Dan Murphy <dmurphy@ti.com>, Andrew Davis <afd@ti.com>,
        Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Pavel Machek <pavel@ucw.cz>, Lee Jones <lee@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Conor Dooley <conor+dt@kernel.org>
CC:     <kernel@axis.com>, Astrid Rost <astrid.rost@axis.com>,
        <linux-leds@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>
Subject: [PATCH v1 2/2] dt: bindings: lp50xx: Add max-brightness as in leds-pwm
Date:   Thu, 29 Jun 2023 15:47:22 +0200
Message-ID: <20230629134722.3908637-3-astrid.rost@axis.com>
In-Reply-To: <20230629134722.3908637-1-astrid.rost@axis.com>
References: <20230629134722.3908637-1-astrid.rost@axis.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Add max-brightness in order to reduce the current on the connected LEDs.
Normally, the maximum brightness is determined by the hardware, and this
property is not required. This property is used to set a software limit.
It could happen that an LED is made so bright that it gets damaged or
causes damage due to restrictions in a specific system, such as mounting
conditions.

Signed-off-by: Astrid Rost <astrid.rost@axis.com>
---
 Documentation/devicetree/bindings/leds/leds-lp50xx.yaml | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
index 402c25424525..6a1425969cb4 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
@@ -73,6 +73,15 @@ patternProperties:
       '#size-cells':
         const: 0
 
+      max-brightness:
+        description:
+          Normally, the maximum brightness is determined by the hardware, and
+          this property is not required. This property is used to set a software
+          limit. It could happen that an LED is made so bright that it gets
+          damaged or causes damage due to restrictions in a specific system,
+          such as mounting conditions.
+        $ref: /schemas/types.yaml#definitions/uint32
+
     patternProperties:
       "^led@[0-9a-f]+$":
         type: object
-- 
2.30.2