Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <35ad912a-e240-a6b6-1cb4-e36d2641c2cf@gmail.com>
Date:   Sat, 1 Jul 2023 15:32:49 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.12.0
Subject: Re: [PATCH 1/1] backlight: apple_bl_usb: Add Apple Studio Display
 support
To:     Julius Zint <julius@zint.sh>, Lee Jones <lee@kernel.org>,
        Daniel Thompson <daniel.thompson@linaro.org>,
        Jingoo Han <jingoohan1@gmail.com>
Cc:     Helge Deller <deller@gmx.de>, linux-kernel@vger.kernel.org,
        dri-devel@lists.freedesktop.org, linux-fbdev@vger.kernel.org
References: <20230701120806.11812-1-julius@zint.sh>
 <20230701120806.11812-2-julius@zint.sh>
Content-Language: en-US
From:   =?UTF-8?B?UmFmYcWCIE1pxYJlY2tp?= <zajec5@gmail.com>
In-Reply-To: <20230701120806.11812-2-julius@zint.sh>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit
Precedence: bulk

On 1.07.2023 14:08, Julius Zint wrote:
> The Apple Studio Display does not have any physical buttons and the only
> way to get or set the brightness is by sending USB control transfers to a
> HID device exposed by the display.
> 
> These control transfers take the form of a HID_(GET|SET)_REPORT request
> and the payload looks like this:
> 
>      struct brightness_ctrl_message_data {
>             u8 unknown_1;
>             __le16 brightness;
>             u8 unkown_2[4];
>      } __packed;
> 
> When compiled as a module this driver needs to be part of the early boot
> environment, otherwise the generic USB HID driver will claim the device.
> 
> Signed-off-by: Julius Zint <julius@zint.sh>

Few comments below.


> ---
>   drivers/video/backlight/Kconfig        |   8 +
>   drivers/video/backlight/Makefile       |   1 +
>   drivers/video/backlight/apple_bl_usb.c | 264 +++++++++++++++++++++++++
>   3 files changed, 273 insertions(+)
>   create mode 100644 drivers/video/backlight/apple_bl_usb.c
> 
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index 51387b1ef012..9383d402ebed 100644
> --- a/drivers/video/backlight/Kconfig
> +++ b/drivers/video/backlight/Kconfig
> @@ -290,6 +290,14 @@ config BACKLIGHT_APPLE
>   	  If you have an Intel-based Apple say Y to enable a driver for its
>   	  backlight.
>   
> +config BACKLIGHT_APPLE_USB
> +	tristate "Apple USB Backlight Driver"
> +	depends on USB
> +	help
> +	  If you have an external display from Apple that is attached via USB
> +	  say Y to enable a driver for its backlight. Currently it supports the
> +	  Apple Studio Display.
> +
>   config BACKLIGHT_QCOM_WLED
>   	tristate "Qualcomm PMIC WLED Driver"
>   	select REGMAP
> diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
> index f72e1c3c59e9..c42880655113 100644
> --- a/drivers/video/backlight/Makefile
> +++ b/drivers/video/backlight/Makefile
> @@ -23,6 +23,7 @@ obj-$(CONFIG_BACKLIGHT_ADP5520)		+= adp5520_bl.o
>   obj-$(CONFIG_BACKLIGHT_ADP8860)		+= adp8860_bl.o
>   obj-$(CONFIG_BACKLIGHT_ADP8870)		+= adp8870_bl.o
>   obj-$(CONFIG_BACKLIGHT_APPLE)		+= apple_bl.o
> +obj-$(CONFIG_BACKLIGHT_APPLE_USB)	+= apple_bl_usb.o
>   obj-$(CONFIG_BACKLIGHT_AS3711)		+= as3711_bl.o
>   obj-$(CONFIG_BACKLIGHT_BD6107)		+= bd6107.o
>   obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH)	+= cr_bllcd.o
> diff --git a/drivers/video/backlight/apple_bl_usb.c b/drivers/video/backlight/apple_bl_usb.c
> new file mode 100644
> index 000000000000..b746b7822974
> --- /dev/null
> +++ b/drivers/video/backlight/apple_bl_usb.c
> @@ -0,0 +1,264 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/usb.h>
> +#include <linux/backlight.h>
> +#include <asm/byteorder.h>
> +
> +#define APPLE_STUDIO_DISPLAY_VENDOR_ID  0x05ac
> +#define APPLE_STUDIO_DISPLAY_PRODUCT_ID 0x1114
> +
> +#define HID_GET_REPORT 0x01
> +#define HID_SET_REPORT 0x09
> +
> +#define HID_REPORT_TYPE_FEATURE 0x0300
> +
> +struct apple_bl_usb_data {
> +	struct usb_interface *usb_interface;
> +	struct usb_device *usb_dev;
> +};
> +
> +struct brightness_ctrl_message_data {
> +	u8 unknown_1;
> +	__le16 brightness;
> +	u8 unkown_2[4];

Typo


> +} __packed;
> +
> +void init_ctrl_msg_data(struct brightness_ctrl_message_data *msg)
> +{
> +	memset(msg, 0, sizeof(struct brightness_ctrl_message_data));
> +	msg->unknown_1 = 0x01;
> +}
> +
> +void set_ctrl_message_brightness(struct brightness_ctrl_message_data *msg,
> +				 u16 brightness_value)
> +{
> +	msg->brightness = cpu_to_le16(brightness_value + 400);
> +}
> +
> +u16 get_ctrl_message_brightness(struct brightness_ctrl_message_data *msg)
> +{
> +	return le16_to_cpu(msg->brightness) - 400;
> +}
> +
> +int apple_bl_usb_usb_get_brightness(struct usb_interface *interface,
> +				    struct usb_device *usb_dev,
> +				    int *brightness)
> +{
> +	int err;
> +	u16 interface_nr;
> +	int msg_data_size;
> +	struct brightness_ctrl_message_data *msg_data;
> +
> +	msg_data_size = sizeof(struct brightness_ctrl_message_data);
> +	msg_data = kzalloc(msg_data_size, GFP_KERNEL);

Check for NULL as kzalloc() may fail


> +	memset(msg_data, 0x00, msg_data_size);
> +	interface_nr = interface->cur_altsetting->desc.bInterfaceNumber;
> +
> +	err = usb_control_msg(usb_dev,
> +			      usb_rcvctrlpipe(usb_dev, 0),
> +			      HID_GET_REPORT,
> +			      USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
> +			      /* wValue: HID-Report Type and Report ID */
> +			      HID_REPORT_TYPE_FEATURE | 0x01,
> +			      interface_nr /* wIndex */,
> +			      msg_data,
> +			      msg_data_size,
> +			      HZ);
> +	if (err < 0) {
> +		dev_err(&interface->dev,
> +			"get: usb control message err: %d\n",
> +			err);

Shouldn't you kfree() and return err here?


> +	}
> +	*brightness = get_ctrl_message_brightness(msg_data);
> +	kfree(msg_data);
> +	dev_dbg(&interface->dev, "get brightness: %d\n", *brightness);
> +	return 0;
> +}
> +
> +int apple_bl_usb_usb_set_brightness(struct usb_interface *interface,
> +				    struct usb_device *usb_dev,
> +				    int brightness)
> +{
> +	int err;
> +	u16 interface_nr;
> +	struct brightness_ctrl_message_data *msg_data;
> +
> +	msg_data = kzalloc(sizeof(struct brightness_ctrl_message_data), GFP_KERNEL);

Same here


> +	interface_nr = interface->cur_altsetting->desc.bInterfaceNumber;
> +	init_ctrl_msg_data(msg_data);
> +	set_ctrl_message_brightness(msg_data, brightness);
> +
> +	err = usb_control_msg(usb_dev,
> +			      usb_sndctrlpipe(usb_dev, 0),
> +			      HID_SET_REPORT,
> +			      USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
> +			      /* wValue: HID-Report Type and Report ID */
> +			      HID_REPORT_TYPE_FEATURE | 0x01,
> +			      interface_nr /* wIndex */,
> +			      msg_data,
> +			      sizeof(struct brightness_ctrl_message_data),
> +			      HZ);
> +	kfree(msg_data);
> +	if (err < 0) {
> +		dev_err(&interface->dev,
> +			"set: usb control message err: %d\n",
> +			err);
> +		return err;
> +	}
> +	dev_dbg(&interface->dev, "set brightness: %d\n", brightness);
> +	return 0;
> +}
> +
> +int apple_bl_usb_check_fb(struct backlight_device *bd, struct fb_info *info)
> +{
> +	dev_info(&bd->dev, "check fb\n");
> +	return 0;
> +}

Do we need that function / print?


> +
> +int apple_bl_usb_get_brightness(struct backlight_device *bl)
> +{
> +	int ret;
> +	struct apple_bl_usb_data *data;
> +	int hw_brightness;
> +
> +	data = bl_get_data(bl);
> +	ret = apple_bl_usb_usb_get_brightness(data->usb_interface,
> +					      data->usb_dev,
> +					      &hw_brightness);
> +	if (!ret)
> +		ret = hw_brightness;
> +
> +	return ret;
> +}
> +
> +int apple_bl_usb_update_status(struct backlight_device *bl)
> +{
> +	int err;
> +	struct apple_bl_usb_data *data;
> +
> +	data = bl_get_data(bl);
> +	err = apple_bl_usb_usb_set_brightness(data->usb_interface,
> +					      data->usb_dev,
> +					      bl->props.brightness);
> +	return err;
> +}
> +
> +static const struct backlight_ops apple_bl_usb_ops = {
> +	.update_status  = apple_bl_usb_update_status,
> +	.get_brightness = apple_bl_usb_get_brightness,
> +	.check_fb       = apple_bl_usb_check_fb,
> +};
> +
> +static void apple_bl_usb_disconnect(struct usb_interface *interface)
> +{
> +	struct backlight_device *bl;
> +
> +	dev_dbg(&interface->dev, "disconnect\n");
> +
> +	bl = usb_get_intfdata(interface);
> +	usb_set_intfdata(interface, NULL);
> +	backlight_device_unregister(bl);
> +}
> +
> +static int apple_bl_usb_probe(struct usb_interface *interface,
> +			      const struct usb_device_id *id)
> +{
> +	struct backlight_properties props;
> +	struct backlight_device *bl;
> +	struct usb_device *usb_dev;
> +	struct device *dev;
> +	struct apple_bl_usb_data *data;
> +	int brightness_interface_nr;
> +
> +	dev_dbg(&interface->dev, "probe\n");
> +
> +	dev = &interface->dev;
> +	usb_dev = interface_to_usbdev(interface);
> +
> +	switch (usb_dev->config->desc.bConfigurationValue) {
> +	case 1:
> +		brightness_interface_nr = 0x7;
> +		break;
> +	case 2:
> +		brightness_interface_nr = 0x9;
> +		break;
> +	case 3:
> +		brightness_interface_nr = 0xc;
> +		break;
> +	default:
> +		dev_err(dev,
> +			"unexpected configuration value: %d\n",
> +			usb_dev->config->desc.bConfigurationValue);
> +		return -EINVAL;
> +	}
> +
> +	if (interface->cur_altsetting->desc.bInterfaceNumber != brightness_interface_nr)
> +		return -ENODEV;
> +
> +	data = devm_kzalloc(dev,
> +			    sizeof(struct apple_bl_usb_data),
> +			    GFP_KERNEL);

I don't think devm_kzalloc() can return error pointer. Just check for NULL below.


> +	if (IS_ERR(data)) {
> +		dev_err(dev, "failed to allocate memory\n");
> +		return PTR_ERR(bl);
> +	}
> +	data->usb_interface = interface;
> +	data->usb_dev = usb_dev;
> +
> +	// Valid brightness values for the apple studio display range from 400
> +	// to 60000. Since the backlight subsystem´s brightness value starts
> +	// from 0, we use 0 to 59600 and offset it by the minimum value.
> +	memset(&props, 0, sizeof(props));
> +	props.type = BACKLIGHT_RAW;
> +	props.max_brightness = 59600;
> +
> +	bl = backlight_device_register("apple_studio_display",
> +				       dev,
> +				       data,
> +				       &apple_bl_usb_ops,
> +				       &props);
> +	if (IS_ERR(bl)) {
> +		dev_err(dev, "failed to register backlight\n");
> +		return PTR_ERR(bl);
> +	}
> +	usb_set_intfdata(interface, bl);
> +	return 0;
> +}
> +
> +static int apple_bl_usb_suspend(struct usb_interface *interface,
> +				pm_message_t message)
> +{
> +	dev_dbg(&interface->dev, "suspend\n");
> +	return 0;
> +}
> +
> +static int apple_bl_usb_resume(struct usb_interface *interface)
> +{
> +	dev_dbg(&interface->dev, "resume\n");
> +	return 0;
> +}
> +
> +static const struct usb_device_id id_table[] = {
> +	{
> +		.idVendor    = APPLE_STUDIO_DISPLAY_VENDOR_ID,
> +		.idProduct   = APPLE_STUDIO_DISPLAY_PRODUCT_ID,
> +	},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(usb, id_table);
> +
> +static struct usb_driver usb_asdbl_driver = {
> +	.name         = "apple_bl_usb",
> +	.probe        = apple_bl_usb_probe,
> +	.disconnect   = apple_bl_usb_disconnect,
> +	.id_table     = id_table,
> +	.suspend      = apple_bl_usb_suspend,
> +	.resume       = apple_bl_usb_resume,
> +	.reset_resume = apple_bl_usb_resume
> +};
> +module_usb_driver(usb_asdbl_driver);
> +
> +MODULE_AUTHOR("Julius Zint <julius@zint.sh>");
> +MODULE_LICENSE("Dual MIT/GPL");
> +MODULE_DESCRIPTION("Backlight control for USB-C Thunderbolt Apple displays");