Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To:     Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Cc:     Bin Liu <b-liu@ti.com>,
        Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1 1/1] usb: musb: Use read_poll_timeout()
Date:   Mon,  3 Jul 2023 15:19:36 +0300
Message-Id: <20230703121936.71623-1-andriy.shevchenko@linux.intel.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Use read_poll_timeout() instead of open coding it.
In the same time, fix the typo in the error message.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/usb/musb/tusb6010.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index cbc707fe570f..2ae82e049f88 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -21,6 +21,7 @@
 #include <linux/usb.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
@@ -1029,7 +1030,7 @@ static int tusb_musb_start(struct musb *musb)
 	void __iomem	*tbase = musb->ctrl_base;
 	unsigned long	flags;
 	u32		reg;
-	int		i;
+	int		ret;
 
 	/*
 	 * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
@@ -1037,17 +1038,13 @@ static int tusb_musb_start(struct musb *musb)
 	 * provide then PGOOD signal to TUSB6010 which will release it from reset.
 	 */
 	gpiod_set_value(glue->enable, 1);
-	msleep(1);
 
 	/* Wait for 100ms until TUSB6010 pulls INT pin down */
-	i = 100;
-	while (i && gpiod_get_value(glue->intpin)) {
-		msleep(1);
-		i--;
-	}
-	if (!i) {
-		pr_err("tusb: Powerup respones failed\n");
-		return -ENODEV;
+	ret = read_poll_timeout(gpiod_get_value, reg, !reg, 1000, 100000, true,
+				glue->intpin);
+	if (ret) {
+		pr_err("tusb: Powerup response failed\n");
+		return ret;
 	}
 
 	spin_lock_irqsave(&musb->lock, flags);
-- 
2.40.0.1.gaa8946217a0b