Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Xingyu Wu <xingyu.wu@starfivetech.com>
To:     <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>,
        "Michael Turquette" <mturquette@baylibre.com>,
        Stephen Boyd <sboyd@kernel.org>,
        "Rob Herring" <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        Conor Dooley <conor@kernel.org>,
        Emil Renner Berthing <emil.renner.berthing@canonical.com>
CC:     Paul Walmsley <paul.walmsley@sifive.com>,
        Palmer Dabbelt <palmer@dabbelt.com>,
        Albert Ou <aou@eecs.berkeley.edu>,
        Hal Feng <hal.feng@starfivetech.com>,
        Xingyu Wu <xingyu.wu@starfivetech.com>,
        "William Qiu" <william.qiu@starfivetech.com>,
        <linux-kernel@vger.kernel.org>, <linux-clk@vger.kernel.org>
Subject: [RESEND PATCH v6 6/7] riscv: dts: starfive: jh7110: Add syscon nodes
Date:   Tue, 4 Jul 2023 14:46:09 +0800
Message-ID: <20230704064610.292603-7-xingyu.wu@starfivetech.com>
In-Reply-To: <20230704064610.292603-1-xingyu.wu@starfivetech.com>
References: <20230704064610.292603-1-xingyu.wu@starfivetech.com>
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 8BIT
Precedence: bulk

From: William Qiu <william.qiu@starfivetech.com>

Add stg_syscon/sys_syscon/aon_syscon/PLL nodes for JH7110 SoC.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Co-developed-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 4c5fdb905da8..11dd4c9d64b0 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -353,6 +353,11 @@ i2c2: i2c@10050000 {
 			status = "disabled";
 		};
 
+		stg_syscon: syscon@10240000 {
+			compatible = "starfive,jh7110-stg-syscon", "syscon";
+			reg = <0x0 0x10240000 0x0 0x1000>;
+		};
+
 		uart3: serial@12000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x12000000 0x0 0x10000>;
@@ -457,6 +462,17 @@ syscrg: clock-controller@13020000 {
 			#reset-cells = <1>;
 		};
 
+		sys_syscon: syscon@13030000 {
+			compatible = "starfive,jh7110-sys-syscon", "syscon", "simple-mfd";
+			reg = <0x0 0x13030000 0x0 0x1000>;
+
+			pllclk: clock-controller {
+				compatible = "starfive,jh7110-pll";
+				clocks = <&osc>;
+				#clock-cells = <1>;
+			};
+		};
+
 		sysgpio: pinctrl@13040000 {
 			compatible = "starfive,jh7110-sys-pinctrl";
 			reg = <0x0 0x13040000 0x0 0x10000>;
@@ -486,6 +502,12 @@ aoncrg: clock-controller@17000000 {
 			#reset-cells = <1>;
 		};
 
+		aon_syscon: syscon@17010000 {
+			compatible = "starfive,jh7110-aon-syscon", "syscon";
+			reg = <0x0 0x17010000 0x0 0x1000>;
+			#power-domain-cells = <1>;
+		};
+
 		aongpio: pinctrl@17020000 {
 			compatible = "starfive,jh7110-aon-pinctrl";
 			reg = <0x0 0x17020000 0x0 0x10000>;
-- 
2.25.1