Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Andreas Hindborg <nmi@metaspace.dk>
To:     Ming Lei <ming.lei@redhat.com>
Cc:     linux-kernel@vger.kernel.org (open list),
        Matias Bjorling <Matias.Bjorling@wdc.com>,
        Hans Holmberg <Hans.Holmberg@wdc.com>,
        Jens Axboe <axboe@kernel.dk>,
        Minwoo Im <minwoo.im.dev@gmail.com>,
        Aravind Ramesh <Aravind.Ramesh@wdc.com>, gost.dev@samsung.com,
        linux-block@vger.kernel.org (open list:BLOCK LAYER),
        Christoph Hellwig <hch@infradead.org>,
        Damien Le Moal <dlemoal@kernel.org>,
        Andreas Hindborg <a.hindborg@samsung.com>
Subject: [PATCH v5 1/5] ublk: add opcode offsets for DRV_IN/DRV_OUT
Date:   Tue,  4 Jul 2023 18:52:05 +0200
Message-ID: <20230704165209.514591-2-nmi@metaspace.dk>
In-Reply-To: <20230704165209.514591-1-nmi@metaspace.dk>
References: <20230704165209.514591-1-nmi@metaspace.dk>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Andreas Hindborg <a.hindborg@samsung.com>

Ublk zoned storage support relies on DRV_IN handling for zone report.
Prepare for this change by adding offsets for the DRV_IN/DRV_OUT commands.

Also add parenthesis to existing opcodes for better macro hygiene.

Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
---
 include/uapi/linux/ublk_cmd.h | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/include/uapi/linux/ublk_cmd.h b/include/uapi/linux/ublk_cmd.h
index 4b8558db90e1..a32810c8ef2b 100644
--- a/include/uapi/linux/ublk_cmd.h
+++ b/include/uapi/linux/ublk_cmd.h
@@ -229,12 +229,16 @@ struct ublksrv_ctrl_dev_info {
 	__u64   reserved2;
 };
 
-#define		UBLK_IO_OP_READ		0
-#define		UBLK_IO_OP_WRITE		1
-#define		UBLK_IO_OP_FLUSH		2
-#define		UBLK_IO_OP_DISCARD	3
-#define		UBLK_IO_OP_WRITE_SAME	4
-#define		UBLK_IO_OP_WRITE_ZEROES	5
+#define		UBLK_IO_OP_READ			(0)
+#define		UBLK_IO_OP_WRITE		(1)
+#define		UBLK_IO_OP_FLUSH		(2)
+#define		UBLK_IO_OP_DISCARD		(3)
+#define		UBLK_IO_OP_WRITE_SAME		(4)
+#define		UBLK_IO_OP_WRITE_ZEROES		(5)
+#define		__UBLK_IO_OP_DRV_IN_START	(32)
+#define		__UBLK_IO_OP_DRV_IN_END		(96)
+#define		__UBLK_IO_OP_DRV_OUT_START	(__UBLK_IO_OP_DRV_IN_END)
+#define		__UBLK_IO_OP_DRV_OUT_END	(160)
 
 #define		UBLK_IO_F_FAILFAST_DEV		(1U << 8)
 #define		UBLK_IO_F_FAILFAST_TRANSPORT	(1U << 9)
-- 
2.41.0