Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Thierry Reding <thierry.reding@gmail.com>,
        Jonathan Hunter <jonathanh@nvidia.com>,
        devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [RFT PATCH 2/2] arm64: tegra: correct audio-codec interrupt flag in P3737-0000
Date:   Wed,  5 Jul 2023 08:49:03 +0200
Message-Id: <20230705064903.12690-2-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230705064903.12690-1-krzysztof.kozlowski@linaro.org>
References: <20230705064903.12690-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE.

Correct the interrupt flags to a value used also in Tegra30 Beaver board
with this device.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index cd13cf2381dd..ad5d7b9028cd 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -2025,7 +2025,7 @@ audio-codec@1c {
 				compatible = "realtek,rt5640";
 				reg = <0x1c>;
 				interrupt-parent = <&gpio>;
-				interrupts = <TEGRA234_MAIN_GPIO(AC, 5) GPIO_ACTIVE_HIGH>;
+				interrupts = <TEGRA234_MAIN_GPIO(AC, 5) IRQ_TYPE_EDGE_FALLING>;
 				clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>;
 				clock-names = "mclk";
 				realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>;
-- 
2.34.1