Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <a4e8929d-f2a6-3429-fc12-78a29e2c8d3a@starfivetech.com>
Date:   Wed, 5 Jul 2023 15:05:59 +0800
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:102.0) Gecko/20100101
 Thunderbird/102.12.0
Subject: Re: [PATCH v4 3/3] riscv: dts: starfive: Add QSPI controller node for
 StarFive JH7110 SoC
Content-Language: en-US
To:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        <devicetree@vger.kernel.org>, <linux-spi@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <linux-riscv@lists.infradead.org>
CC:     Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Emil Renner Berthing <kernel@esmil.dk>,
        Ziv Xu <ziv.xu@starfivetech.com>
References: <20230704090453.83980-1-william.qiu@starfivetech.com>
 <20230704090453.83980-4-william.qiu@starfivetech.com>
 <552d39ee-0fa0-94c0-89b9-245e39e8586d@linaro.org>
From:   William Qiu <william.qiu@starfivetech.com>
In-Reply-To: <552d39ee-0fa0-94c0-89b9-245e39e8586d@linaro.org>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 2023/7/4 17:43, Krzysztof Kozlowski wrote:
> On 04/07/2023 11:04, William Qiu wrote:
>> Add the quad spi controller node for the StarFive JH7110 SoC.
>> 
>> Co-developed-by: Ziv Xu <ziv.xu@starfivetech.com>
>> Signed-off-by: Ziv Xu <ziv.xu@starfivetech.com>
>> Signed-off-by: William Qiu <william.qiu@starfivetech.com>
>> Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
> 
> ...
> 
>> +		qspi: spi@13010000 {
>> +			compatible = "starfive,jh7110-qspi", "cdns,qspi-nor";
>> +			reg = <0x0 0x13010000 0x0 0x10000>,
>> +			      <0x0 0x21000000 0x0 0x400000>;
>> +			interrupts = <25>;
>> +			clocks = <&syscrg JH7110_SYSCLK_QSPI_REF>,
>> +				 <&syscrg JH7110_SYSCLK_QSPI_AHB>,
>> +				 <&syscrg JH7110_SYSCLK_QSPI_APB>;
>> +			clock-names = "ref", "ahb", "apb";
>> +			resets = <&syscrg JH7110_SYSRST_QSPI_APB>,
>> +				 <&syscrg JH7110_SYSRST_QSPI_AHB>,
>> +				 <&syscrg JH7110_SYSRST_QSPI_REF>;
>> +			reset-names = "qspi", "qspi-ocp", "rstc_ref";
>> +			cdns,fifo-depth = <256>;
>> +			cdns,fifo-width = <4>;
>> +			cdns,trigger-address = <0x0>;
> 
> Bus nodes are usually disabled by default and enabled when needed for
> specific boards.
> 
Will add status.
Thanks for your comments.

Best regards,
William
> Best regards,
> Krzysztof
>