Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Christopher Obbard <chris.obbard@collabora.com>
To:     linux-rockchip@lists.infradead.org
Cc:     kernel@collabora.com,
        Christopher Obbard <chris.obbard@collabora.com>,
        Akash Gajjar <Akash_Gajjar@mentor.com>,
        Conor Dooley <conor+dt@kernel.org>,
        FUKAUMI Naoki <naoki@radxa.com>,
        Heiko Stuebner <heiko@sntech.de>,
        Jagan Teki <jagan@amarulasolutions.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Manoj Sai <abbaraju.manojsai@amarulasolutions.com>,
        Pragnesh Patel <Pragnesh_Patel@mentor.com>,
        Rob Herring <robh+dt@kernel.org>,
        Stephen Chen <stephen@radxa.com>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 0/2] Disable HS400 for eMMC on Radxa ROCK 4 SBCs
Date:   Wed,  5 Jul 2023 15:42:53 +0100
Message-Id: <20230705144255.115299-1-chris.obbard@collabora.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

There is some instablity with some eMMC modules on ROCK Pi 4 SBCs running
in HS400 mode. This ends up resulting in some block errors after a while
or after a "heavy" operation utilising the eMMC (e.g. resizing a
filesystem). An example of these errors is as follows:

    [  289.171014] mmc1: running CQE recovery
    [  290.048972] mmc1: running CQE recovery
    [  290.054834] mmc1: running CQE recovery
    [  290.060817] mmc1: running CQE recovery
    [  290.061337] blk_update_request: I/O error, dev mmcblk1, sector 1411072 op 0x1:(WRITE) flags 0x800 phys_seg 36 prio class 0
    [  290.061370] EXT4-fs warning (device mmcblk1p1): ext4_end_bio:348: I/O error 10 writing to inode 29547 starting block 176466)
    [  290.061484] Buffer I/O error on device mmcblk1p1, logical block 172288
    [  290.061531] Buffer I/O error on device mmcblk1p1, logical block 172289
    [  290.061551] Buffer I/O error on device mmcblk1p1, logical block 172290
    [  290.061574] Buffer I/O error on device mmcblk1p1, logical block 172291
    [  290.061592] Buffer I/O error on device mmcblk1p1, logical block 172292
    [  290.061615] Buffer I/O error on device mmcblk1p1, logical block 172293
    [  290.061632] Buffer I/O error on device mmcblk1p1, logical block 172294
    [  290.061654] Buffer I/O error on device mmcblk1p1, logical block 172295
    [  290.061673] Buffer I/O error on device mmcblk1p1, logical block 172296
    [  290.061695] Buffer I/O error on device mmcblk1p1, logical block 172297

Disabling the Command Queue seems to stop the CQE recovery from running,
but doesn't seem to improve the I/O errors. Until this can be investigated
further, disable HS400 mode on the ROCK Pi 4 SBCs to at least stop I/O
errors from occurring.


Christopher Obbard (2):
  arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4
  arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+

 arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts | 3 +--
 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi   | 4 ++--
 2 files changed, 3 insertions(+), 4 deletions(-)

-- 
2.40.1