Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <b1346bc7-4bf0-e885-c3d4-6fac01516bf4@linaro.org>
Date:   Mon, 10 Jul 2023 14:14:39 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.13.0
Subject: Re: [PATCH 5/6] arm64: dts: qcom: ipq5332: Add thermal zone nodes
Content-Language: en-US
To:     Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
        Praveenkumar I <quic_ipkumar@quicinc.com>, agross@kernel.org,
        andersson@kernel.org, amitk@kernel.org, thara.gopinath@gmail.com,
        rafael@kernel.org, daniel.lezcano@linaro.org, rui.zhang@intel.com,
        robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        conor+dt@kernel.org, linux-arm-msm@vger.kernel.org,
        linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     quic_varada@quicinc.com
References: <20230710103735.1375847-1-quic_ipkumar@quicinc.com>
 <20230710103735.1375847-6-quic_ipkumar@quicinc.com>
 <3f6ab4b4-b5f5-5807-0cb4-8ae782bd6044@linaro.org>
From:   Konrad Dybcio <konrad.dybcio@linaro.org>
In-Reply-To: <3f6ab4b4-b5f5-5807-0cb4-8ae782bd6044@linaro.org>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

On 10.07.2023 13:23, Dmitry Baryshkov wrote:
> On 10/07/2023 13:37, Praveenkumar I wrote:
>> This patch adds thermal zone nodes for sensors present in
>> IPQ5332.
>>
>> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/ipq5332.dtsi | 72 +++++++++++++++++++++++++++
>>   1 file changed, 72 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> index a1e3527178c0..8b276aeca53e 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> @@ -527,4 +527,76 @@ timer {
>>                    <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>                    <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>>       };
>> +
>> +    thermal-zones {
>> +        rfa-0-thermal{
thermal {


>> +            polling-delay-passive = <0>;
>> +            polling-delay = <0>;
>> +            thermal-sensors = <&tsens 11>;
>> +
>> +            trips {
Indentation seems off, tab size for kernel code is 8 spaces.

Konrad
>> +                rfa-0-critical {
>> +                    temperature = <125000>;
>> +                    hysteresis = <1000>;
>> +                    type = "critical";
>> +                };
>> +            };
>> +        };
>> +
>> +        rfa-1-thermal {
>> +            polling-delay-passive = <0>;
>> +            polling-delay = <0>;
>> +            thermal-sensors = <&tsens 12>;
>> +
>> +            trips {
>> +                rfa-1-critical {
>> +                    temperature = <125000>;
>> +                    hysteresis = <1000>;
>> +                    type = "critical";
>> +                };
>> +            };
>> +        };
>> +
>> +        misc-thermal {
>> +            polling-delay-passive = <0>;
>> +            polling-delay = <0>;
>> +            thermal-sensors = <&tsens 13>;
>> +
>> +            trips {
>> +                misc-critical {
>> +                    temperature = <125000>;
>> +                    hysteresis = <1000>;
>> +                    type = "critical";
>> +                };
>> +            };
>> +        };
>> +
>> +        cpu-top-thermal {
>> +            polling-delay-passive = <0>;
>> +            polling-delay = <0>;
>> +            thermal-sensors = <&tsens 14>;
>> +
>> +            trips {
>> +                cpu-top-critical {
>> +                    temperature = <125000>;
>> +                    hysteresis = <1000>;
>> +                    type = "critical";
>> +                };
>> +            };
> 
> Could you please add a passive cooling devices for the CPU?
> 
>> +        };
>> +
>> +        top-glue-thermal {
>> +            polling-delay-passive = <0>;
>> +            polling-delay = <0>;
>> +            thermal-sensors = <&tsens 15>;
>> +
>> +            trips {
>> +                top-glue-critical {
>> +                    temperature = <125000>;
>> +                    hysteresis = <1000>;
>> +                    type = "critical";
>> +                };
>> +            };
>> +        };
>> +    };
>>   };
>