Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Guiting Shen <aarongt.shen@gmail.com>
To:     claudiu.beznea@microchip.com
Cc:     thierry.reding@gmail.com, u.kleine-koenig@pengutronix.de,
        nicolas.ferre@microchip.com, alexandre.belloni@bootlin.com,
        linux-arm-kernel@lists.infradead.org, linux-pwm@vger.kernel.org,
        linux-kernel@vger.kernel.org, Guiting Shen <aarongt.shen@gmail.com>
Subject: [PATCH v3] pwm: atmel: Enable clk when pwm already enabled in bootloader
Date:   Wed, 12 Jul 2023 04:09:05 +0800
Message-Id: <20230711200905.6464-1-aarongt.shen@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The driver would never call clk_enable() if the PWM channel was already
enabled in bootloader which lead to dump the warning message "the PWM
clock already disabled" when turning off the PWM channel.

Add atmel_pwm_enable_clk_if_on() in probe function to enable clock if
the PWM channel was already enabled in bootloader.

Signed-off-by: Guiting Shen <aarongt.shen@gmail.com>
---
 drivers/pwm/pwm-atmel.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
index cdbc23649032..f8f1fbb8732d 100644
--- a/drivers/pwm/pwm-atmel.c
+++ b/drivers/pwm/pwm-atmel.c
@@ -464,6 +464,31 @@ static const struct of_device_id atmel_pwm_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, atmel_pwm_dt_ids);
 
+static int atmel_pwm_enable_clk_if_on(struct atmel_pwm_chip *atmel_pwm)
+{
+	unsigned int i;
+	int err;
+	u32 sr;
+
+	sr = atmel_pwm_readl(atmel_pwm, PWM_SR);
+	if (!sr)
+		return 0;
+
+	for (i = 0; i < atmel_pwm->chip.npwm; i++) {
+		if (!(sr & (1 << i)))
+			continue;
+
+		err = clk_enable(atmel_pwm->clk);
+		if (err) {
+			dev_err(atmel_pwm->chip.dev,
+				"failed to enable clock: %pe\n", ERR_PTR(err));
+			return err;
+		}
+	}
+
+	return 0;
+}
+
 static int atmel_pwm_probe(struct platform_device *pdev)
 {
 	struct atmel_pwm_chip *atmel_pwm;
@@ -504,8 +529,15 @@ static int atmel_pwm_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, atmel_pwm);
 
+	ret = atmel_pwm_enable_clk_if_on(atmel_pwm);
+	if (ret < 0)
+		goto remove_pwmchip;
+
 	return ret;
 
+remove_pwmchip:
+	pwmchip_remove(&atmel_pwm->chip);
+
 unprepare_clk:
 	clk_unprepare(atmel_pwm->clk);
 	return ret;
-- 
2.25.1