Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <a33368ef-f68c-d7ee-922a-8896a5d1f158@linaro.org>
Date:   Wed, 12 Jul 2023 15:25:21 +0300
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.12.0
Subject: Re: [PATCH v2 4/5] arm64: dts: qcom: ipq5332: Add thermal zone nodes
Content-Language: en-GB
To:     Praveenkumar I <quic_ipkumar@quicinc.com>, amitk@kernel.org,
        thara.gopinath@gmail.com, agross@kernel.org, andersson@kernel.org,
        konrad.dybcio@linaro.org, rafael@kernel.org,
        daniel.lezcano@linaro.org, rui.zhang@intel.com, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
        linux-pm@vger.kernel.org, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc:     quic_varada@quicinc.com
References: <20230712113539.4029941-1-quic_ipkumar@quicinc.com>
 <20230712113539.4029941-5-quic_ipkumar@quicinc.com>
From:   Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In-Reply-To: <20230712113539.4029941-5-quic_ipkumar@quicinc.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 12/07/2023 14:35, Praveenkumar I wrote:
> This patch adds thermal zone nodes for sensors present in
> IPQ5332.
> 
> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> ---
> [v2]:
> 	Added passive trips and alignment change.
> 
>   arch/arm64/boot/dts/qcom/ipq5332.dtsi | 78 +++++++++++++++++++++++++++
>   1 file changed, 78 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> index 0eef77e36609..a1f59af97ee8 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> @@ -480,4 +480,82 @@ timer {
>   			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>   			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>   	};
> +
> +	thermal-zones {
> +		rfa-0-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 11>;
> +
> +			trips {
> +				rfa-0-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		rfa-1-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 12>;
> +
> +			trips {
> +				rfa-1-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		misc-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 13>;
> +
> +			trips {
> +				misc-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpu-top-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 14>;
> +
> +			trips {
> +				cpu-top-critical {
> +					temperature = <115000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +
> +				cpu-passive {
> +					temperature = <105000>;
> +					hysteresis = <1000>;
> +					type = "passive";

cooling device for this trip point?

> +				};
> +			};
> +		};
> +
> +		top-glue-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 15>;
> +
> +			trips {
> +				top-glue-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +	};
>   };

-- 
With best wishes
Dmitry