Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Fenghua Yu <fenghua.yu@intel.com>
To:     "Vinod Koul" <vkoul@kernel.org>,
        "Dave Jiang" <dave.jiang@intel.com>
Cc:     dmaengine@vger.kernel.org,
        "linux-kernel" <linux-kernel@vger.kernel.org>,
        Fenghua Yu <fenghua.yu@intel.com>,
        Tony Zhu <tony.zhu@intel.com>
Subject: [PATCH v2] dmaengine: idxd: Clear PRS disable flag when disabling IDXD device
Date:   Wed, 12 Jul 2023 10:42:20 -0700
Message-Id: <20230712174220.3434989-1-fenghua.yu@intel.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Disabling IDXD device doesn't reset Page Request Service (PRS)
disable flag to its initial value 0. This may cause user confusion
because once PRS is disabled user will see PRS still remains the
previous setting (i.e. disabled) via sysfs interface even after the
device is disabled.

To eliminate the confusion, reset PRS disable flag when the device
is disabled.

Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
v2:
- Fix Tony's email typo

 drivers/dma/idxd/device.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index 5abbcc61c528..71dfb2c13066 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -387,6 +387,7 @@ static void idxd_wq_disable_cleanup(struct idxd_wq *wq)
 	clear_bit(WQ_FLAG_DEDICATED, &wq->flags);
 	clear_bit(WQ_FLAG_BLOCK_ON_FAULT, &wq->flags);
 	clear_bit(WQ_FLAG_ATS_DISABLE, &wq->flags);
+	clear_bit(WQ_FLAG_PRS_DISABLE, &wq->flags);
 	memset(wq->name, 0, WQ_NAME_SIZE);
 	wq->max_xfer_bytes = WQ_DEFAULT_MAX_XFER;
 	idxd_wq_set_max_batch_size(idxd->data->type, wq, WQ_DEFAULT_MAX_BATCH);
-- 
2.37.1