Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@collabora.com>
To:     sboyd@kernel.org
Cc:     mturquette@baylibre.com, matthias.bgg@gmail.com,
        angelogioacchino.delregno@collabora.com, wenst@chromium.org,
        msp@baylibre.com, amergnat@baylibre.com, yangyingliang@huawei.com,
        u.kleine-koenig@pengutronix.de, miles.chen@mediatek.com,
        linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-mediatek@lists.infradead.org, kernel@collabora.com
Subject: [PATCH 2/2] clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
Date:   Thu, 13 Jul 2023 09:21:38 +0200
Message-Id: <20230713072138.84117-3-angelogioacchino.delregno@collabora.com>
In-Reply-To: <20230713072138.84117-1-angelogioacchino.delregno@collabora.com>
References: <20230713072138.84117-1-angelogioacchino.delregno@collabora.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The top_dp and top_edp muxes can be both parented to either TVDPLL1
or TVDPLL2, two identically specced PLLs for the specific purpose of
giving out pixel clock: this becomes a problem when the MediaTek
DisplayPort Interface (DPI) driver tries to set the pixel clock rate.

In the usecase of two simultaneous outputs (using two controllers),
it was seen that one of the displays would sometimes display garbled
output (if any at all) and this was because:
 - top_edp was set to TVDPLL1, outputting X GHz
 - top_dp was set to TVDPLL2, outputting Y GHz
   - mtk_dpi calls clk_set_rate(top_edp, Z GHz)
     - top_dp is switched to TVDPLL1
     - TVDPLL1 changes its rate, top_edp outputs the wrong rate.
     - eDP display is garbled

To solve this issue, remove all TVDPLL1 parents from `top_dp` and
all TVDPLL2 parents from `top_edp`, plus, necessarily switch both
clocks to use the new MUX_GATE_CLR_SET_UPD_INDEXED() macro to be
able to use the right bit index for the new parents list.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/clk/mediatek/clk-mt8195-topckgen.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/mediatek/clk-mt8195-topckgen.c b/drivers/clk/mediatek/clk-mt8195-topckgen.c
index 81daa24cadde..abb3721f6e1b 100644
--- a/drivers/clk/mediatek/clk-mt8195-topckgen.c
+++ b/drivers/clk/mediatek/clk-mt8195-topckgen.c
@@ -417,15 +417,21 @@ static const char * const pwrmcu_parents[] = {
 
 static const char * const dp_parents[] = {
 	"clk26m",
-	"tvdpll1_d2",
 	"tvdpll2_d2",
-	"tvdpll1_d4",
 	"tvdpll2_d4",
-	"tvdpll1_d8",
 	"tvdpll2_d8",
-	"tvdpll1_d16",
 	"tvdpll2_d16"
 };
+static const u8 dp_parents_idx[] = { 0, 2, 4, 6, 8 };
+
+static const char * const edp_parents[] = {
+	"clk26m",
+	"tvdpll1_d2",
+	"tvdpll1_d4",
+	"tvdpll1_d8",
+	"tvdpll1_d16"
+};
+static const u8 edp_parents_idx[] = { 0, 1, 3, 5, 7 };
 
 static const char * const disp_pwm_parents[] = {
 	"clk26m",
@@ -957,11 +963,11 @@ static const struct mtk_mux top_mtk_muxes[] = {
 	MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_PWRMCU, "top_pwrmcu",
 		pwrmcu_parents, 0x08C, 0x090, 0x094, 16, 3, 23, 0x08, 6,
 		CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
-	MUX_GATE_CLR_SET_UPD(CLK_TOP_DP, "top_dp",
-		dp_parents, 0x08C, 0x090, 0x094, 24, 4, 31, 0x08, 7),
+	MUX_GATE_CLR_SET_UPD_INDEXED(CLK_TOP_DP, "top_dp",
+		dp_parents, dp_parents_idx, 0x08C, 0x090, 0x094, 24, 4, 31, 0x08, 7),
 	/* CLK_CFG_10 */
-	MUX_GATE_CLR_SET_UPD(CLK_TOP_EDP, "top_edp",
-		dp_parents, 0x098, 0x09C, 0x0A0, 0, 4, 7, 0x08, 8),
+	MUX_GATE_CLR_SET_UPD_INDEXED(CLK_TOP_EDP, "top_edp",
+		edp_parents, edp_parents_idx, 0x098, 0x09C, 0x0A0, 0, 4, 7, 0x08, 8),
 	MUX_GATE_CLR_SET_UPD(CLK_TOP_DPI, "top_dpi",
 		dp_parents, 0x098, 0x09C, 0x0A0, 8, 4, 15, 0x08, 9),
 	MUX_GATE_CLR_SET_UPD(CLK_TOP_DISP_PWM0, "top_disp_pwm0",
-- 
2.40.1