Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Sebastian Reichel <sre@kernel.org>
To:     Sebastian Reichel <sre@kernel.org>
Cc:     Gerald Loacker <gerald.loacker@wolfvision.net>,
        Michael Riesch <michael.riesch@wolfvision.net>,
        Miquel Raynal <miquel.raynal@bootlin.com>,
        Thierry Reding <thierry.reding@gmail.com>,
        Sam Ravnborg <sam@ravnborg.org>,
        David Airlie <airlied@gmail.com>,
        Daniel Vetter <daniel@ffwll.ch>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
        devicetree@vger.kernel.org
Subject: [PATCH v3 00/19] Sitronix ST7789V improvements
Date:   Fri, 14 Jul 2023 03:37:37 +0200
Message-Id: <20230714013756.1546769-1-sre@kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

Hi,

This adds panel support for Inanbo T28CP45TN89, which I found inside of a
handheld thermal camera. The panel is based on the st7789v controller. All
information is based on reverse engineering. I also appended the series
from Miquel Raynal adding EDT ET028013DMA panel support, so that I could
easily test it with my SPI_NO_RX setup. They are slightly different due
to rebasing.

Changes since PATCHv2:
 * https://lore.kernel.org/all/20230422205012.2464933-1-sre@kernel.org/
 * https://lore.kernel.org/all/20230616163255.2804163-1-miquel.raynal@bootlin.com/
 * Add Rob Herring's R-b for the DT binding
 * Make panel info "static const"
 * Add Michael Riesch's R-b to all my patches
 * Rebase to 6.5-rc1
 * Append Miquel's series

Changes since PATCHv1:
 * https://lore.kernel.org/all/20230317232355.1554980-1-sre@kernel.org/
 * Apply DT binding changes requested by Krzysztof Kozlowski and his Ack
 * I changed the driver patches to avoid code duplication and splitted
   the code a bit more

Greetings,

-- Sebastian

Miquel Raynal (6):
  dt-bindings: display: st7789v: Add the edt,et028013dma panel
    compatible
  dt-bindings: display: st7789v: bound the number of Rx data lines
  drm/panel: sitronix-st7789v: Use 9 bits per spi word by default
  drm/panel: sitronix-st7789v: Clarify a definition
  drm/panel: sitronix-st7789v: Add EDT ET028013DMA panel support
  drm/panel: sitronix-st7789v: Check display ID

Sebastian Reichel (13):
  dt-bindings: vendor-prefixes: add Inanbo
  dt-bindings: display: st7789v: add Inanbo T28CP45TN89
  drm/panel: sitronix-st7789v: add SPI ID table
  drm/panel: sitronix-st7789v: remove unused constants
  drm/panel: sitronix-st7789v: make reset GPIO optional
  drm/panel: sitronix-st7789v: simplify st7789v_spi_write
  drm/panel: sitronix-st7789v: improve error handling
  drm/panel: sitronix-st7789v: avoid hardcoding mode info
  drm/panel: sitronix-st7789v: avoid hardcoding panel size
  drm/panel: sitronix-st7789v: add media bus format
  drm/panel: sitronix-st7789v: avoid hardcoding invert mode
  drm/panel: sitronix-st7789v: avoid hardcoding polarity info
  drm/panel: sitronix-st7789v: add Inanbo T28CP45TN89 support

 .../display/panel/sitronix,st7789v.yaml       |  10 +-
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 .../gpu/drm/panel/panel-sitronix-st7789v.c    | 262 +++++++++++++++---
 3 files changed, 237 insertions(+), 37 deletions(-)

-- 
2.40.1