Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Mon, 17 Jul 2023 19:23:22 +0200
From:   Stephan Gerhold <stephan@gerhold.net>
To:     Konrad Dybcio <konrad.dybcio@linaro.org>
Cc:     Bjorn Andersson <andersson@kernel.org>,
        Andy Gross <agross@kernel.org>,
        Michael Turquette <mturquette@baylibre.com>,
        Stephen Boyd <sboyd@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Marijn Suijten <marijn.suijten@somainline.org>,
        linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
        linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 15/15] arm64: dts: qcom: sm6115: Add VDD_CX to GPU_CCC
Message-ID: <ZLV5CirE8CZfCjkX@gerhold.net>
References: <20230717-topic-branch_aon_cleanup-v1-0-27784d27a4f4@linaro.org>
 <20230717-topic-branch_aon_cleanup-v1-15-27784d27a4f4@linaro.org>
 <ZLVsN40kYsvQm1z6@gerhold.net>
 <a193a4dd-0a0a-0d36-6d83-0424cd1dce80@linaro.org>
 <ZLVyvHnKPdOfqAck@gerhold.net>
 <8c5dc146-c305-bef9-0d97-76a91345ed1a@linaro.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <8c5dc146-c305-bef9-0d97-76a91345ed1a@linaro.org>
Content-Transfer-Encoding: 7bit
Precedence: bulk

On Mon, Jul 17, 2023 at 07:11:33PM +0200, Konrad Dybcio wrote:
> On 17.07.2023 18:56, Stephan Gerhold wrote:
> > On Mon, Jul 17, 2023 at 06:50:18PM +0200, Konrad Dybcio wrote:
> >> On 17.07.2023 18:28, Stephan Gerhold wrote:
> >>> On Mon, Jul 17, 2023 at 05:19:22PM +0200, Konrad Dybcio wrote:
> >>>> The GPU_CC block is powered by VDD_CX. Describe that.
> >>>>
> >>>> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> >>>> ---
> >>>>  arch/arm64/boot/dts/qcom/sm6115.dtsi | 2 ++
> >>>>  1 file changed, 2 insertions(+)
> >>>>
> >>>> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> >>>> index 29b5b388cd94..bfaaa1801a4d 100644
> >>>> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> >>>> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> >>>> @@ -1430,6 +1430,8 @@ gpucc: clock-controller@5990000 {
> >>>>  			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
> >>>>  				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
> >>>>  				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
> >>>> +			power-domains = <&rpmpd SM6115_VDDCX>;
> >>>> +			required-opps = <&rpmpd_opp_low_svs>;
> >>>
> >>> Where is this required-opp coming from? The clocks in gpucc seem to have
> >>> different voltage requirements depending on the rates, but we usually
> >>> handle that in the OPP tables of the consumer.
> >> The only lower levels defined for this SoC are VDD_MIN and VDD_RET,
> >> but quite obviously the GPU won't work then
> >>
> > 
> > The levels needed for the GPU clocks to run should be in the GPU OPP
> > table though, just like e.g. sdhc2_opp_table for the SDCC clocks.
> > 
> > I still don't really understand why this is specified here. :)
> The GPU_CC block needs this rail to be at a certain power level for
> register access. This describes that requirement.
> 

Can you show where this is defined downstream? On a quick look I didn't
see something like that anywhere. Or is this from some secret
documentation?

Thanks,
Stephan