Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Tue, 18 Jul 2023 18:53:19 +0200
From:   Stanislav Jakubek <stano.jakubek@gmail.com>
To:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Florian Fainelli <florian.fainelli@broadcom.com>,
        Ray Jui <rjui@broadcom.com>,
        Scott Branden <sbranden@broadcom.com>
Cc:     bcm-kernel-feedback-list@broadcom.com, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2] ARM: dts: bcm28155-ap: use node labels
Message-ID: <20230718165319.GA5179@standask-GA-A55M-S2HP>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Precedence: bulk

Use node labels instead of nodename@address for BCM28155 AP board
to simplify its DTS file.

Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
---
Changes in V2:
  - keep &pmu (bcm59056) related stuff last in the file
  - drop already applied patches
  - drop cover letter (since this is now a single patch)

V1 - https://lore.kernel.org/lkml/cover.1685127525.git.stano.jakubek@gmail.com/

 arch/arm/boot/dts/broadcom/bcm28155-ap.dts | 94 +++++++++++-----------
 1 file changed, 47 insertions(+), 47 deletions(-)

diff --git a/arch/arm/boot/dts/broadcom/bcm28155-ap.dts b/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
index 0a8ad1d673d8..2f3634545e64 100644
--- a/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
@@ -15,64 +15,64 @@ memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
+};
 
-	serial@3e000000 {
-		status = "okay";
-	};
-
-	i2c@3e016000 {
-		clock-frequency = <400000>;
-		status = "okay";
-	};
+&bsc1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
 
-	i2c@3e017000 {
-		clock-frequency = <400000>;
-		status = "okay";
-	};
+&bsc2 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
 
-	i2c@3e018000 {
-		clock-frequency = <400000>;
-		status = "okay";
-	};
+&bsc3 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
 
-	i2c@3500d000 {
-		clock-frequency = <100000>;
-		status = "okay";
+&pmu_bsc {
+	clock-frequency = <100000>;
+	status = "okay";
 
-		pmu: pmu@8 {
-			reg = <0x08>;
-		};
+	pmu: pmu@8 {
+		reg = <0x08>;
 	};
+};
 
-	sdio2: mmc@3f190000 {
-		non-removable;
-		max-frequency = <48000000>;
-		vmmc-supply = <&camldo1_reg>;
-		vqmmc-supply = <&iosr1_reg>;
-		status = "okay";
-	};
+&pwm {
+	status = "okay";
+};
 
-	sdio4: mmc@3f1b0000 {
-		max-frequency = <48000000>;
-		cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		vmmc-supply = <&sdldo_reg>;
-		vqmmc-supply = <&sdxldo_reg>;
-		status = "okay";
-	};
+&sdio2 {
+	non-removable;
+	max-frequency = <48000000>;
+	vmmc-supply = <&camldo1_reg>;
+	vqmmc-supply = <&iosr1_reg>;
+	status = "okay";
+};
 
-	pwm: pwm@3e01a000 {
-		status = "okay";
-	};
+&sdio4 {
+	max-frequency = <48000000>;
+	cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&sdldo_reg>;
+	vqmmc-supply = <&sdxldo_reg>;
+	status = "okay";
+};
 
-	usbotg: usb@3f120000 {
-		vusb_d-supply = <&usbldo_reg>;
-		vusb_a-supply = <&iosr1_reg>;
-		status = "okay";
-	};
+&uartb {
+	status = "okay";
+};
 
-	usbphy: usb-phy@3f130000 {
-		status = "okay";
-	};
+&usbotg {
+	vusb_d-supply = <&usbldo_reg>;
+	vusb_a-supply = <&iosr1_reg>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
 };
 
 #include "bcm59056.dtsi"
-- 
2.25.1