Received: by 2002:a05:6358:7058:b0:131:369:b2a3 with SMTP id 24csp7153043rwp; Tue, 18 Jul 2023 10:48:07 -0700 (PDT) X-Google-Smtp-Source: APBJJlHBAlFtPHx6XAoIqK9EjqcUJt1e9c2v4rUbweOQgiaSO/kUmnfkFB/NikdExCiI4njq9rCK X-Received: by 2002:a17:906:10d2:b0:993:d0e1:f308 with SMTP id v18-20020a17090610d200b00993d0e1f308mr6899058ejv.2.1689702486909; Tue, 18 Jul 2023 10:48:06 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1689702486; cv=none; d=google.com; s=arc-20160816; b=MV4AhJEdwAOqTOxbNvmABiirusglIaBnwVqgA8hxa6OXj7rX37Ds8Z0E09vL86n+iM f8Ya/Zagk3zQLG5TOAz93LHhA6tRfOR3YQ60dU+lrjzkbi5lRdh50atWV8qMPXSs2xzq 6W8UJCLAcbaIdWcmv3IppPQthySzC8CWaqNMM7vJoywqS66bh0EMSBl3hddz8xpaCsm1 tXc387MT2TVDxvl7hF5olSTTt2zfjlZ9dGnWViuoEFBL0osAskUTQ6zExac2n3nNuG7Z wovo5tUqViNdGg6gZhuBQJ2k+DGlY6JpYtBg5tdxwmRAzWtz6oTlE+OXJEXtzPI3S+Sr gNdQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:in-reply-to:content-disposition:mime-version :references:message-id:subject:cc:to:from:date:dkim-signature; bh=aCkw8iDSKnUxxO/gnW+iqFBjsG4rDTRLQbcdVemERVs=; fh=ulbURdrIN7Hew1U7orTJbH91sH9EU10Zg2Ub3UwNROs=; b=d74RlVz49PxVQtEraGkRujYjYTRfLIRzhio7zlH+Z92eTOeeAp70gScmm+vnEkChQp Dk+BirkUHMMtlEwhCbr/HA3rafn86geAGa/ejelagVEE+XX8ZpEPTooHVH2tUJrUYoci xUDxiDgP3E/HLvivPssjLIxtjag84uvKERdVLpYO3YmRJqbCregpcXX1cw9UwpUPRqd5 1k2B7QtXtqGlXftj9e3ilMQ1evvrYOTOxGROLNpg4f8iqDwUmaTuoypy15GCom0htpMq yI/19VS2Z82X+wTC62cGTOZQuJdkj0wl1Qdaaw1/Js9Tq3ei2SrRT+jpgzw8aPfKjAEa 3HFw== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@kernel.org header.s=k20201202 header.b=OcSVicev; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Return-Path: Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id kf25-20020a17090776d900b009886162521csi1478119ejc.1009.2023.07.18.10.47.43; Tue, 18 Jul 2023 10:48:06 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@kernel.org header.s=k20201202 header.b=OcSVicev; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231340AbjGRR25 (ORCPT + 99 others); Tue, 18 Jul 2023 13:28:57 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:55152 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230215AbjGRR24 (ORCPT ); Tue, 18 Jul 2023 13:28:56 -0400 Received: from dfw.source.kernel.org (dfw.source.kernel.org [IPv6:2604:1380:4641:c500::1]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 238F7B3; Tue, 18 Jul 2023 10:28:54 -0700 (PDT) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits)) (No client certificate requested) by dfw.source.kernel.org (Postfix) with ESMTPS id 9EC3D6165F; Tue, 18 Jul 2023 17:28:53 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 62508C433C8; Tue, 18 Jul 2023 17:28:52 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1689701333; bh=NKL/4gve0SKk+Vwa5tciudsWHSAfladJ01k5oF9lZH0=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=OcSVicevNiL7y93VNcIsALG0gxYnWbFZNDEBJX4VUhCmFXSpqAMvnRL13iJlf2elV SzQW13g/ua8piJZaiBWZs8x4Hw5kjQw5d/hAITGZMTSX7JXh5ufkaVbYdN6vfNF0v6 nU+uVHWLRQsTgd+ocmz99xRgmxonEhFslftT5KfVslIl5uCQBGiF3JMG547eVjtgHr vFDIPcYSf3jm3D6aeD8Qk0GaWw5DV9ZO68x8zB7CXkGIMBuhl5IvRrHPCulo4JoKGP Tb6jWg6SFjsIv86lYjwNQBFCKtg22PPkCtlYUIKAyGKpG1NmANfsxHlfO7msK5wf5Y wyL8HEpg9MOPA== Date: Tue, 18 Jul 2023 10:28:50 -0700 From: Nathan Chancellor To: "Sahin, Okan" Cc: Liam Girdwood , Mark Brown , Rob Herring , Krzysztof Kozlowski , Conor Dooley , "Tilki, Ibrahim" , "linux-kernel@vger.kernel.org" , "devicetree@vger.kernel.org" , "llvm@lists.linux.dev" Subject: Re: [PATCH v3 2/2] regulator: max77857: Add ADI MAX77857/59/MAX77831 Regulator Support Message-ID: <20230718172850.GA3954824@dev-arch.thelio-3990X> References: <20230717050736.10075-1-okan.sahin@analog.com> <20230717050736.10075-3-okan.sahin@analog.com> <20230718155502.GA3542993@dev-arch.thelio-3990X> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: X-Spam-Status: No, score=-4.4 required=5.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_MED, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Tue, Jul 18, 2023 at 05:25:32PM +0000, Sahin, Okan wrote: > >From: Nathan Chancellor > >Sent: Tuesday, July 18, 2023 6:55 PM > >To: Sahin, Okan > >Cc: Liam Girdwood ; Mark Brown ; > >Rob Herring ; Krzysztof Kozlowski > >; Conor Dooley ; Tilki, > >Ibrahim ; linux-kernel@vger.kernel.org; > >devicetree@vger.kernel.org; llvm@lists.linux.dev > >Subject: Re: [PATCH v3 2/2] regulator: max77857: Add ADI MAX77857/59/MAX77831 > >Regulator Support > > > >[External] > > > >Hi Okan, > > > >On Mon, Jul 17, 2023 at 08:07:35AM +0300, Okan Sahin wrote: > >> Regulator driver for MAX77857/59 and MAX77831. > >> The MAX77857 is a high-efficiency, high-performance > >> buck-boost converter targeted for systems requiring > >> a wide input voltage range (2.5V to 16V). > >> > >> The MAX77859 is high-Efficiency Buck-Boost Converter > >> for USB-PD/PPS Applications. It has wide input range > >> (2.5V to 22V) > >> > >> The MAX77831 is a high-efficiency, high-performance > >> buck-boost converter targeted for systems requiring > >> wide input voltage range (2.5V to 16V). > >> > >> Signed-off-by: Okan Sahin > >> --- > >> drivers/regulator/Kconfig | 10 + > >> drivers/regulator/Makefile | 1 + > >> drivers/regulator/max77857-regulator.c | 459 +++++++++++++++++++++++++ > >> 3 files changed, 470 insertions(+) > >> create mode 100644 drivers/regulator/max77857-regulator.c > >> > >> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig > >> index e5f3613c15fa..09eaa1cd90de 100644 > >> --- a/drivers/regulator/Kconfig > >> +++ b/drivers/regulator/Kconfig > >> @@ -573,6 +573,16 @@ config REGULATOR_MAX77650 > >> Semiconductor. This device has a SIMO with three independent > >> power rails and an LDO. > >> > >> +config REGULATOR_MAX77857 > >> + tristate "ADI MAX77857/MAX77831 regulator support" > >> + depends on I2C > >> + select REGMAP_I2C > >> + help > >> + This driver controls a ADI MAX77857 and MAX77831 regulators. > >> + via I2C bus. MAX77857 and MAX77831 are high efficiency buck-boost > >> + converters with input voltage range (2.5V to 16V). Say Y here to > >> + enable the regulator driver > >> + > >> config REGULATOR_MAX8649 > >> tristate "Maxim 8649 voltage regulator" > >> depends on I2C > >> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile > >> index 58dfe0147cd4..e7230846b680 100644 > >> --- a/drivers/regulator/Makefile > >> +++ b/drivers/regulator/Makefile > >> @@ -85,6 +85,7 @@ obj-$(CONFIG_REGULATOR_MAX77686) += max77686- > >regulator.o > >> obj-$(CONFIG_REGULATOR_MAX77693) += max77693-regulator.o > >> obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o > >> obj-$(CONFIG_REGULATOR_MAX77826) += max77826-regulator.o > >> +obj-$(CONFIG_REGULATOR_MAX77857) += max77857-regulator.o > >> obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o > >> obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o > >> obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o > >> diff --git a/drivers/regulator/max77857-regulator.c b/drivers/regulator/max77857- > >regulator.c > >> new file mode 100644 > >> index 000000000000..c5482ffd606e > >> --- /dev/null > >> +++ b/drivers/regulator/max77857-regulator.c > >> @@ -0,0 +1,459 @@ > >> +// SPDX-License-Identifier: GPL-2.0-only > >> +/* > >> + * Copyright (c) 2023 Analog Devices, Inc. > >> + * ADI Regulator driver for the MAX77857 > >> + * MAX77859 and MAX77831. > >> + */ > >> +#include > >> +#include > >> +#include > >> +#include > >> +#include > >> +#include > >> +#include > >> +#include > >> +#include > >> + > >> +#define MAX77857_REG_INT_SRC 0x10 > >> +#define MAX77857_REG_INT_MASK 0x11 > >> +#define MAX77857_REG_CONT1 0x12 > >> +#define MAX77857_REG_CONT2 0x13 > >> +#define MAX77857_REG_CONT3 0x14 > >> + > >> +#define MAX77857_INT_SRC_OCP BIT(0) > >> +#define MAX77857_INT_SRC_THS BIT(1) > >> +#define MAX77857_INT_SRC_HARDSHORT BIT(2) > >> +#define MAX77857_INT_SRC_OVP BIT(3) > >> +#define MAX77857_INT_SRC_POK BIT(4) > >> + > >> +#define MAX77857_ILIM_MASK GENMASK(2, 0) > >> +#define MAX77857_CONT1_FREQ GENMASK(4, 3) > >> +#define MAX77857_CONT3_FPWM BIT(5) > >> + > >> +#define MAX77859_REG_INT_SRC 0x11 > >> +#define MAX77859_REG_CONT1 0x13 > >> +#define MAX77859_REG_CONT2 0x14 > >> +#define MAX77859_REG_CONT3 0x15 > >> +#define MAX77859_REG_CONT5 0x17 > >> +#define MAX77859_CONT2_FPWM BIT(2) > >> +#define MAX77859_CONT2_INTB BIT(3) > >> +#define MAX77859_CONT3_DVS_START BIT(2) > >> +#define MAX77859_VOLTAGE_SEL_MASK GENMASK(9, 0) > >> + > >> +#define MAX77859_CURRENT_MIN 1000000 > >> +#define MAX77859_CURRENT_MAX 5000000 > >> +#define MAX77859_CURRENT_STEP 50000 > >> + > >> +enum max77857_id { > >> + ID_MAX77831 = 1, > >> + ID_MAX77857, > >> + ID_MAX77859, > >> + ID_MAX77859A, > >> +}; > >> + > >> +static bool max77857_volatile_reg(struct device *dev, unsigned int reg) > >> +{ > >> + enum max77857_id id = (enum max77857_id)dev_get_drvdata(dev); > >> + > >> + switch (id) { > >> + case ID_MAX77831: > >> + case ID_MAX77857: > >> + return reg == MAX77857_REG_INT_SRC; > >> + case ID_MAX77859: > >> + case ID_MAX77859A: > >> + return reg == MAX77859_REG_INT_SRC; > >> + default: > >> + return true; > >> + } > >> +} > >> + > >> +struct regmap_config max77857_regmap_config = { > >> + .reg_bits = 8, > >> + .val_bits = 8, > >> + .cache_type = REGCACHE_MAPLE, > >> + .volatile_reg = max77857_volatile_reg, > >> +}; > >> + > >> +static int max77857_get_status(struct regulator_dev *rdev) > >> +{ > >> + unsigned int val; > >> + int ret; > >> + > >> + ret = regmap_read(rdev->regmap, MAX77857_REG_INT_SRC, &val); > >> + if (ret) > >> + return ret; > >> + > >> + if (FIELD_GET(MAX77857_INT_SRC_POK, val)) > >> + return REGULATOR_STATUS_ON; > >> + > >> + return REGULATOR_STATUS_ERROR; > >> +} > >> + > >> +static unsigned int max77857_get_mode(struct regulator_dev *rdev) > >> +{ > >> + enum max77857_id id = (enum max77857_id)rdev_get_drvdata(rdev); > >> + unsigned int regval; > >> + int ret; > >> + > >> + switch (id) { > >> + case ID_MAX77831: > >> + case ID_MAX77857: > >> + ret = regmap_read(rdev->regmap, MAX77857_REG_CONT3, > >®val); > >> + if (ret) > >> + return ret; > >> + > >> + if (FIELD_GET(MAX77857_CONT3_FPWM, regval)) > >> + return REGULATOR_MODE_FAST; > >> + > >> + break; > >> + case ID_MAX77859: > >> + case ID_MAX77859A: > >> + ret = regmap_read(rdev->regmap, MAX77859_REG_CONT2, > >®val); > >> + if (ret) > >> + return ret; > >> + > >> + if (FIELD_GET(MAX77859_CONT2_FPWM, regval)) > >> + return REGULATOR_MODE_FAST; > >> + > >> + break; > >> + default: > >> + return -EINVAL; > >> + } > >> + > >> + return REGULATOR_MODE_NORMAL; > >> +} > >> + > >> +static int max77857_set_mode(struct regulator_dev *rdev, unsigned int mode) > >> +{ > >> + enum max77857_id id = (enum max77857_id)rdev_get_drvdata(rdev); > >> + unsigned int reg, val; > >> + > >> + switch (id) { > >> + case ID_MAX77831: > >> + case ID_MAX77857: > >> + reg = MAX77857_REG_CONT3; > >> + val = MAX77857_CONT3_FPWM; > >> + break; > >> + case ID_MAX77859: > >> + case ID_MAX77859A: > >> + reg = MAX77859_REG_CONT2; > >> + val = MAX77859_CONT2_FPWM; > >> + break; > >> + default: > >> + return -EINVAL; > >> + } > >> + > >> + switch (mode) { > >> + case REGULATOR_MODE_FAST: > >> + return regmap_set_bits(rdev->regmap, reg, val); > >> + case REGULATOR_MODE_NORMAL: > >> + return regmap_clear_bits(rdev->regmap, reg, val); > >> + default: > >> + return -EINVAL; > >> + } > >> +} > >> + > >> +static int max77857_get_error_flags(struct regulator_dev *rdev, > >> + unsigned int *flags) > >> +{ > >> + unsigned int val; > >> + int ret; > >> + > >> + ret = regmap_read(rdev->regmap, MAX77857_REG_INT_SRC, &val); > >> + if (ret) > >> + return ret; > >> + > >> + *flags = 0; > >> + > >> + if (FIELD_GET(MAX77857_INT_SRC_OVP, val)) > >> + *flags |= REGULATOR_ERROR_OVER_VOLTAGE_WARN; > >> + > >> + if (FIELD_GET(MAX77857_INT_SRC_OCP, val) || > >> + FIELD_GET(MAX77857_INT_SRC_HARDSHORT, val)) > >> + *flags |= REGULATOR_ERROR_OVER_CURRENT; > >> + > >> + if (FIELD_GET(MAX77857_INT_SRC_THS, val)) > >> + *flags |= REGULATOR_ERROR_OVER_TEMP; > >> + > >> + if (!FIELD_GET(MAX77857_INT_SRC_POK, val)) > >> + *flags |= REGULATOR_ERROR_FAIL; > >> + > >> + return 0; > >> +} > >> + > >> +static struct linear_range max77859_lin_ranges[] = { > >> + REGULATOR_LINEAR_RANGE(3200000, 0x0A0, 0x320, 20000) > >> +}; > >> + > >> +static const unsigned int max77859_ramp_table[4] = { > >> + 1000, 500, 250, 125 > >> +}; > >> + > >> +static int max77859_set_voltage_sel(struct regulator_dev *rdev, > >> + unsigned int sel) > >> +{ > >> + __be16 reg; > >> + int ret; > >> + > >> + reg = cpu_to_be16(sel); > >> + > >> + ret = regmap_bulk_write(rdev->regmap, MAX77859_REG_CONT3, ®, 2); > >> + if (ret) > >> + return ret; > >> + > >> + /* actually apply new voltage */ > >> + return regmap_set_bits(rdev->regmap, MAX77859_REG_CONT3, > >> + MAX77859_CONT3_DVS_START); > >> +} > >> + > >> +int max77859_get_voltage_sel(struct regulator_dev *rdev) > >> +{ > >> + __be16 reg; > >> + int ret; > >> + > >> + ret = regmap_bulk_read(rdev->regmap, MAX77859_REG_CONT3, ®, 2); > >> + if (ret) > >> + return ret; > >> + > >> + return FIELD_GET(MAX77859_VOLTAGE_SEL_MASK, __be16_to_cpu(reg)); > >> +} > >> + > >> +int max77859_set_current_limit(struct regulator_dev *rdev, int min_uA, int > >max_uA) > >> +{ > >> + u32 selector; > >> + > >> + if (max_uA < MAX77859_CURRENT_MIN) > >> + return -EINVAL; > >> + > >> + selector = 0x12 + (max_uA - MAX77859_CURRENT_MIN) / > >MAX77859_CURRENT_STEP; > >> + > >> + selector = clamp_val(selector, 0x00, 0x7F); > >> + > >> + return regmap_write(rdev->regmap, MAX77859_REG_CONT5, selector); > >> +} > >> + > >> +int max77859_get_current_limit(struct regulator_dev *rdev) > >> +{ > >> + u32 selector; > >> + int ret; > >> + > >> + ret = regmap_read(rdev->regmap, MAX77859_REG_CONT5, &selector); > >> + if (ret) > >> + return ret; > >> + > >> + if (selector <= 0x12) > >> + return MAX77859_CURRENT_MIN; > >> + > >> + if (selector >= 0x64) > >> + return MAX77859_CURRENT_MAX; > >> + > >> + return MAX77859_CURRENT_MIN + (selector - 0x12) * > >MAX77859_CURRENT_STEP; > >> +} > >> + > >> +static const struct regulator_ops max77859_regulator_ops = { > >> + .list_voltage = regulator_list_voltage_linear_range, > >> + .set_voltage_sel = max77859_set_voltage_sel, > >> + .get_voltage_sel = max77859_get_voltage_sel, > >> + .set_ramp_delay = regulator_set_ramp_delay_regmap, > >> + .get_status = max77857_get_status, > >> + .set_mode = max77857_set_mode, > >> + .get_mode = max77857_get_mode, > >> + .get_error_flags = max77857_get_error_flags, > >> +}; > >> + > >> +static const struct regulator_ops max77859a_regulator_ops = { > >> + .list_voltage = regulator_list_voltage_linear_range, > >> + .set_voltage_sel = max77859_set_voltage_sel, > >> + .get_voltage_sel = max77859_get_voltage_sel, > >> + .set_current_limit = max77859_set_current_limit, > >> + .get_current_limit = max77859_get_current_limit, > >> + .set_ramp_delay = regulator_set_ramp_delay_regmap, > >> + .get_status = max77857_get_status, > >> + .set_mode = max77857_set_mode, > >> + .get_mode = max77857_get_mode, > >> + .get_error_flags = max77857_get_error_flags, > >> +}; > >> + > >> +static const struct regulator_ops max77857_regulator_ops = { > >> + .list_voltage = regulator_list_voltage_linear_range, > >> + .set_voltage_sel = regulator_set_voltage_sel_regmap, > >> + .get_voltage_sel = regulator_get_voltage_sel_regmap, > >> + .set_ramp_delay = regulator_set_ramp_delay_regmap, > >> + .get_status = max77857_get_status, > >> + .set_mode = max77857_set_mode, > >> + .get_mode = max77857_get_mode, > >> + .get_error_flags = max77857_get_error_flags, > >> +}; > >> + > >> +static struct linear_range max77857_lin_ranges[] = { > >> + REGULATOR_LINEAR_RANGE(4485000, 0x3D, 0xCC, 73500) > >> +}; > >> + > >> +static const unsigned int max77857_switch_freq[] = { > >> + 1200000, 1500000, 1800000, 2100000 > >> +}; > >> + > >> +static const unsigned int max77857_ramp_table[2][4] = { > >> + { 1333, 667, 333, 227 }, /* when switch freq is 1.8MHz or 2.1MHz */ > >> + { 1166, 667, 333, 167 }, /* when switch freq is 1.2MHz or 1.5MHz */ > >> +}; > >> + > >> +static struct regulator_desc max77857_regulator_desc = { > >> + .ops = &max77857_regulator_ops, > >> + .name = "max77857", > >> + .linear_ranges = max77857_lin_ranges, > >> + .n_linear_ranges = ARRAY_SIZE(max77857_lin_ranges), > >> + .vsel_mask = 0xFF, > >> + .vsel_reg = MAX77857_REG_CONT2, > >> + .ramp_delay_table = max77857_ramp_table[0], > >> + .n_ramp_values = ARRAY_SIZE(max77857_ramp_table[0]), > >> + .ramp_reg = MAX77857_REG_CONT3, > >> + .ramp_mask = GENMASK(1, 0), > >> + .ramp_delay = max77857_ramp_table[0][0], > > > >This breaks the build with GCC 5.x through 7.x: > > > > drivers/regulator/max77857-regulator.c:312:16: error: initializer element is not > >constant > > .ramp_delay = max77857_ramp_table[0][0], > > ^~~~~~~~~~~~~~~~~~~ > > drivers/regulator/max77857-regulator.c:312:16: note: (near initialization for > >'max77857_regulator_desc.ramp_delay') > > > >and clang: > > > > drivers/regulator/max77857-regulator.c:312:16: error: initializer element is not a > >compile-time constant > > 312 | .ramp_delay = max77857_ramp_table[0][0], > > | ^~~~~~~~~~~~~~~~~~~~~~~~~ > > 1 error generated. > > > >This relies on a GCC 8.x+ change that accepts more things as > >compile-time constants, which is being worked on in clang > >(https://urldefense.com/v3/__https://reviews.llvm.org/D76096__;!!A3Ni8CS0y2Y!4ql > >noZFf_EVInN- > >MaRDQWqOHb1SEbEqkwlU06PCt1Ngw6tE41ZEE24hnL1wBMsfotRCue4-i1VwD0xw$ > >). Since the kernel supports older > >compilers, this will have to be worked around somehow. Perhaps a define > >that can be used in both places? > > > >Cheers, > >Nathan > > > >> + .owner = THIS_MODULE, > >> +}; > >> + > >> +static void max77857_calc_range(struct device *dev, enum max77857_id id) > >> +{ > >> + struct linear_range *range; > >> + unsigned long vref_step; > >> + u32 rtop = 0; > >> + u32 rbot = 0; > >> + > >> + device_property_read_u32(dev, "adi,rtop-ohms", &rtop); > >> + device_property_read_u32(dev, "adi,rbot-ohms", &rbot); > >> + > >> + if (!rbot || !rtop) > >> + return; > >> + > >> + switch (id) { > >> + case ID_MAX77831: > >> + case ID_MAX77857: > >> + range = max77857_lin_ranges; > >> + vref_step = 4900UL; > >> + break; > >> + case ID_MAX77859: > >> + case ID_MAX77859A: > >> + range = max77859_lin_ranges; > >> + vref_step = 1250UL; > >> + break; > >> + } > >> + > >> + range->step = DIV_ROUND_CLOSEST(vref_step * (rbot + rtop), rbot); > >> + range->min = range->step * range->min_sel; > >> +} > >> + > >> +static int max77857_probe(struct i2c_client *client) > >> +{ > >> + const struct i2c_device_id *i2c_id; > >> + struct device *dev = &client->dev; > >> + struct regulator_config cfg = { }; > >> + struct regulator_dev *rdev; > >> + struct regmap *regmap; > >> + enum max77857_id id; > >> + u32 switch_freq = 0; > >> + int ret; > >> + > >> + i2c_id = i2c_client_get_device_id(client); > >> + if (!i2c_id) > >> + return -EINVAL; > >> + > >> + id = i2c_id->driver_data; > >> + > >> + dev_set_drvdata(dev, (void *)id); > >> + > >> + if (id == ID_MAX77859 || id == ID_MAX77859A) { > >> + max77857_regulator_desc.ops = &max77859_regulator_ops; > >> + max77857_regulator_desc.linear_ranges = max77859_lin_ranges; > >> + max77857_regulator_desc.ramp_delay_table = > >max77859_ramp_table; > >> + max77857_regulator_desc.ramp_delay = max77859_ramp_table[0]; > >> + } > >> + > >> + if (id == ID_MAX77859A) > >> + max77857_regulator_desc.ops = &max77859a_regulator_ops; > >> + > >> + max77857_calc_range(dev, id); > >> + > >> + regmap = devm_regmap_init_i2c(client, &max77857_regmap_config); > >> + if (IS_ERR(regmap)) > >> + return dev_err_probe(dev, PTR_ERR(regmap), > >> + "cannot initialize regmap\n"); > >> + > >> + device_property_read_u32(dev, "adi,switch-frequency-hz", &switch_freq); > >> + if (switch_freq) { > >> + switch_freq = find_closest(switch_freq, max77857_switch_freq, > >> + ARRAY_SIZE(max77857_switch_freq)); > >> + > >> + if (id == ID_MAX77831 && switch_freq == 3) > >> + switch_freq = 2; > >> + > >> + switch (id) { > >> + case ID_MAX77831: > >> + case ID_MAX77857: > >> + ret = regmap_update_bits(regmap, MAX77857_REG_CONT1, > >> + MAX77857_CONT1_FREQ, > >switch_freq); > >> + > >> + if (switch_freq >= 2) > >> + break; > >> + > >> + max77857_regulator_desc.ramp_delay_table = > >max77857_ramp_table[1]; > >> + max77857_regulator_desc.ramp_delay = > >max77857_ramp_table[1][0]; > >> + break; > >> + case ID_MAX77859: > >> + case ID_MAX77859A: > >> + ret = regmap_update_bits(regmap, MAX77859_REG_CONT1, > >> + MAX77857_CONT1_FREQ, > >switch_freq); > >> + break; > >> + } > >> + if (ret) > >> + return ret; > >> + } > >> + > >> + cfg.dev = dev; > >> + cfg.driver_data = (void *)id; > >> + cfg.regmap = regmap; > >> + cfg.init_data = of_get_regulator_init_data(dev, dev->of_node, > >> + &max77857_regulator_desc); > >> + if (!cfg.init_data) > >> + return -ENOMEM; > >> + > >> + rdev = devm_regulator_register(dev, &max77857_regulator_desc, &cfg); > >> + if (IS_ERR(rdev)) > >> + return dev_err_probe(dev, PTR_ERR(rdev), > >> + "cannot register regulator\n"); > >> + > >> + return 0; > >> +} > >> + > >> +const struct i2c_device_id max77857_id[] = { > >> + { "max77831", ID_MAX77831 }, > >> + { "max77857", ID_MAX77857 }, > >> + { "max77859", ID_MAX77859 }, > >> + { "max77859a", ID_MAX77859A }, > >> + { } > >> +}; > >> +MODULE_DEVICE_TABLE(i2c, max77857_id); > >> + > >> +static const struct of_device_id max77857_of_id[] = { > >> + { .compatible = "adi,max77831", .data = (void *)ID_MAX77831 }, > >> + { .compatible = "adi,max77857", .data = (void *)ID_MAX77857 }, > >> + { .compatible = "adi,max77859", .data = (void *)ID_MAX77859 }, > >> + { .compatible = "adi,max77859a", .data = (void *)ID_MAX77859A }, > >> + { } > >> +}; > >> +MODULE_DEVICE_TABLE(of, max77857_of_id); > >> + > >> +struct i2c_driver max77857_driver = { > >> + .driver = { > >> + .name = "max77857", > >> + .of_match_table = max77857_of_id, > >> + }, > >> + .id_table = max77857_id, > >> + .probe_new = max77857_probe, > >> +}; > >> +module_i2c_driver(max77857_driver); > >> + > >> +MODULE_DESCRIPTION("Analog Devices MAX77857 Buck-Boost Converter > >Driver"); > >> +MODULE_AUTHOR("Ibrahim Tilki "); > >> +MODULE_AUTHOR("Okan Sahin "); > >> +MODULE_LICENSE("GPL"); > >> -- > >> 2.30.2 > >> > > Hi Nathan, > > Should I need to fix it within the patch v4? Or should I sent another patch after merge? I do not believe Mark rebases his tree so he would not take a v4. It will need to be a separate patch on top. Cheers, Nathan