Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Sender: Guenter Roeck <groeck7@gmail.com>
Date:   Tue, 18 Jul 2023 20:04:45 -0700
From:   Guenter Roeck <linux@roeck-us.net>
To:     Naresh Solanki <naresh.solanki@9elements.com>
Cc:     devicetree@vger.kernel.org, Jean Delvare <jdelvare@suse.com>,
        linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
        Patrick Rudolph <patrick.rudolph@9elements.com>
Subject: Re: [PATCH v2 4/8] hwmon: (pmbus/mp2975) Simplify VOUT code
Message-ID: <40f4b633-8f71-4760-9dff-9484f7fb74de@roeck-us.net>
References: <20230714135124.2645339-1-Naresh.Solanki@9elements.com>
 <20230714135124.2645339-4-Naresh.Solanki@9elements.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20230714135124.2645339-4-Naresh.Solanki@9elements.com>
Precedence: bulk

On Fri, Jul 14, 2023 at 03:51:12PM +0200, Naresh Solanki wrote:
> From: Patrick Rudolph <patrick.rudolph@9elements.com>
> 
> In order to upstream MP2973/MP2971 simplify the code by removing support
> for various VOUT formats. The MP2973 and MP2971 supports all PMBUS
> supported formats for VOUT, while the MP2975 only support DIRECT and
> VID for VOUT.
> 
> In DIRECT mode all chips report the voltage in 1mV/LSB.
> 
> Configure the chip to use DIRECT format for VOUT and drop the code
> conversion code for other formats. The to be added chips MP2973/MP2971
> will be configured to also report VOUT in DIRECT format.
> 
> The maximum voltage that can be reported in DIRECT format is 32768mV.
> This is sufficient as the maximum output voltage for VR12/VR13 is
> 3040 mV.
> 
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>

Applied.

Thanks,
Guenter