Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krishna chaitanya chundru <quic_krichai@quicinc.com>
To:     manivannan.sadhasivam@linaro.org
Cc:     helgaas@kernel.org, linux-pci@vger.kernel.org,
        linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
        quic_vbadigan@quicinc.com, quic_nitegupt@quicinc.com,
        quic_skananth@quicinc.com, quic_ramkri@quicinc.com,
        krzysztof.kozlowski@linaro.org,
        Krishna chaitanya chundru <quic_krichai@quicinc.com>
Subject: [PATCH v10 0/4] PCI: qcom: ep: Add basic interconnect support
Date:   Wed, 19 Jul 2023 12:50:14 +0530
Message-Id: <1689751218-24492-1-git-send-email-quic_krichai@quicinc.com>
Precedence: bulk

Add basic support for managing "pcie-mem" interconnect path by setting
a low constraint before enabling clocks and updating it after the link
is up based on link speed and width the device got enumerated.

changes from v9:
	- addressed the comments by mani.
changes from v8:
        - Added cpu to pcie path in dtsi and in dtsi binding.
changes from v7:
        - setting icc bw to '0' in disable resources as suggested by mani.
changes from v6:
        - addressed the comments as suggested by mani.
changes from v5:
        - addressed the comments by mani.
changes from v4:
        - rebased with linux-next.
        - Added comments as suggested by mani.
        - removed the arm: dts: qcom: sdx55: Add interconnect path
          as that patch is already applied.
changes from v3:
        - ran make DT_CHECKER_FLAGS=-m dt_binding_check and fixed
         errors.
        - Added macros in the qcom ep driver patch as suggested by Dmitry
changes from v2:
        - changed the logic for getting speed and width as suggested
         by bjorn.
        - fixed compilation errors.


Krishna chaitanya chundru (4):
  PCI: qcom-ep: Add ICC bandwidth voting support
  arm: dts: qcom: sdx65: Add PCIe EP interconnect path
  arm: dts: qcom: sdx55: Add CPU PCIe EP interconnect path
  dt-bindings: PCI: qcom: ep: Add interconnects path

 .../devicetree/bindings/pci/qcom,pcie-ep.yaml      | 15 +++++
 arch/arm/boot/dts/qcom/qcom-sdx55.dtsi             |  5 +-
 arch/arm/boot/dts/qcom/qcom-sdx65.dtsi             |  4 ++
 drivers/pci/controller/dwc/pcie-qcom-ep.c          | 71 ++++++++++++++++++++++
 4 files changed, 93 insertions(+), 2 deletions(-)

-- 
2.7.4