Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <3c291f6a-7e9a-b863-9c34-c486647edbf7@linaro.org>
Date:   Wed, 19 Jul 2023 11:17:26 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.13.0
Subject: Re: [PATCH 5/7] ARM: dts: exynos: k3g: Add notification LED support
Content-Language: en-US
To:     Markuss Broks <markuss.broks@gmail.com>
Cc:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Alim Akhtar <alim.akhtar@samsung.com>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
References: <20230716220644.22158-1-markuss.broks@gmail.com>
 <20230716220644.22158-7-markuss.broks@gmail.com>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230716220644.22158-7-markuss.broks@gmail.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 17/07/2023 00:05, Markuss Broks wrote:
> This device has a Texas Instruments LP5562 LED controller
> which controls the LEDs which are used as notification lights.
> It has three colors which can be combined, supports pulse mode
> and other various features.
> 
> Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
> ---
>  arch/arm/boot/dts/exynos5422-samsung-k3g.dts | 47 ++++++++++++++++++++
>  1 file changed, 47 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
> index b3576a745054..813dbf0438de 100644
> --- a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
> +++ b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
> @@ -10,6 +10,7 @@
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/leds/common.h>
>  #include "exynos5800.dtsi"
>  #include "exynos5422-cpus.dtsi"
>  
> @@ -131,6 +132,52 @@ touchkey@20 {
>  		};
>  	};
>  
> +	i2c-led {
> +		compatible = "i2c-gpio";
> +
> +		sda-gpios = <&gpy3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +		scl-gpios = <&gpy3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +		i2c-gpio,delay-us = <2>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		lp5562@30 {

Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

Most likely this is led-controller


Best regards,
Krzysztof