Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Andrej Picej <andrej.picej@norik.com>
To:     robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
        kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com
Cc:     devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, S.Riedmueller@phytec.de,
        S.Mueller-Klieser@phytec.de, upstream@phytec.de
Subject: [PATCH v2 2/3] ARM: dts: imx6: pfla02: Rely on PMIC reboot/reset handler
Date:   Wed, 19 Jul 2023 13:43:27 +0200
Message-Id: <20230719114328.2239818-2-andrej.picej@norik.com>
In-Reply-To: <20230719114328.2239818-1-andrej.picej@norik.com>
References: <20230719114328.2239818-1-andrej.picej@norik.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Due to the missing signal connection between i.MX6 WDOG_B pin and the
PMICs external reset, the internal i.MX6 watchdog is not able to reset
the phyFLEX SoM properly. Thus disable the internal i.MX6 watchdog to
prevent unexpected PMIC settings after reset.

NOTE: This patch should not be backported as it might break existing
uses and fixes in bootloaders.

Signed-off-by: Andrej Picej <andrej.picej@norik.com>
---
Changes in v2:
 - this is a substitute patch with a proper fix.
---
 arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
index 80adb2a02cc9..65fd7b4a6f27 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
@@ -464,3 +464,11 @@ &usdhc3 {
 	vmmc-supply = <&vdd_sd0_reg>;
 	status = "disabled";
 };
+
+&wdog1 {
+	/*
+	 * Rely on PMIC reboot handler. Internal i.MX6 watchdog, that is also
+	 * used for reboot, does not reset all external PMIC voltages on reset.
+	 */
+	status = "disabled";
+};
-- 
2.25.1