Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Mime-Version: 1.0
Subject: [PATCH v2] md/bitmap: Avoid protection error writing bitmap page
 with block integrity
Reply-To: j-young.choi@samsung.com
Sender: Jinyoung Choi <j-young.choi@samsung.com>
From:   Jinyoung Choi <j-young.choi@samsung.com>
To:     "song@kernel.org" <song@kernel.org>,
        "linux-raid@vger.kernel.org" <linux-raid@vger.kernel.org>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
CC:     "pmenzel@molgen.mpg.de" <pmenzel@molgen.mpg.de>
Message-ID: <20230720092957epcms2p6cbd0ecdf7f5bf0db3c04eefaf0a6644d@epcms2p6>
Date:   Thu, 20 Jul 2023 18:29:57 +0900
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset="utf-8"
CMS-TYPE: 102P
DLP-Filter: Pass
References: <CGME20230720092957epcms2p6cbd0ecdf7f5bf0db3c04eefaf0a6644d@epcms2p6>
Precedence: bulk

Changing the bitmap page is also possible on the page where the DMA is
being performed or scheduled in the MD.

When configuring raid1 (mirror) with devices that support block integrity,
the same bitmap page is sent to the device twice during the resync process,
causing the following problems.
(When requeue is executed, integrity is not updated)

             [Func 1]                          [Func 2]

1     A(page) + a(integrity)
2        (sq doorbell)
3                                          A(page) -> A-1(page)
4  A-1(page-updated) + a(integrity)     A-1(page) + a-1(integrity)
5                                            (sq doorbell)
6           (DMA)                                (DMA)

       I/O Fail and retry N                   I/O Success
       To be Faulty Device

My Test Env: Two FIPS PM1743
- nvme format /dev/nvme2n1 --force -n 1 -i 1 -p 0 -m 0 -l 1 -r
- nvme format /dev/nvme3n1 --force -n 1 -i 1 -p 0 -m 0 -l 1 -r
- mdadm -C /dev/md0 -l 1 -n 2 /dev/nvme2n1 /dev/nvme3n1

The following is the log when a problem occurs. The problematic device
is in the faulty device state.

Log:
[  135.037253] md/raid1:md0: active with 2 out of 2 mirrors
[  135.038228] md0: detected capacity change from 0 to 7501212288
[  135.038270] md: resync of RAID array md0
[  151.252172] nvme2n1: I/O Cmd(0x1) @ LBA 16, 8 blocks, I/O Error (sct 0x2 / sc 0x82) MORE
[  151.252180] protection error, dev nvme2n1, sector 16 op 0x1:(WRITE) flags 0x10800 phys_seg 1 prio class 2
[  151.252185] md: super_written gets error=-84
[  151.252187] md/raid1:md0: Disk failure on nvme2n1, disabling device.
               md/raid1:md0: Operation continuing on 1 devices.
[  151.267450] nvme3n1: I/O Cmd(0x1) @ LBA 16, 8 blocks, I/O Error (sct 0x2 / sc 0x82) MORE
[  151.267457] protection error, dev nvme3n1, sector 16 op 0x1:(WRITE) flags 0x10800 phys_seg 1 prio class 2
[  151.267460] md: super_written gets error=-84
[  151.268458] md: md0: resync interrupted.
[  151.320765] md: resync of RAID array md0
[  151.321205] md: md0: resync done.

Signed-off-by: Jinyoung Choi <j-young.choi@samsung.com>
---
 drivers/md/md-bitmap.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/md/md-bitmap.c b/drivers/md/md-bitmap.c
index 1ff712889a3b..dfb7418ba48a 100644
--- a/drivers/md/md-bitmap.c
+++ b/drivers/md/md-bitmap.c
@@ -467,6 +467,13 @@ void md_bitmap_update_sb(struct bitmap *bitmap)
 		return;
 	if (!bitmap->storage.sb_page) /* no superblock */
 		return;
+
+	/*
+	 * Before modifying the bitmap page and re-issue it, wait for
+	 * the requests previously sent to the device to be completed.
+	 */
+	md_bitmap_wait_writes(bitmap);
+
 	sb = kmap_atomic(bitmap->storage.sb_page);
 	sb->events = cpu_to_le64(bitmap->mddev->events);
 	if (bitmap->mddev->events < bitmap->events_cleared)
-- 
2.34.1