Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Thu, 20 Jul 2023 18:00:15 +0200
From:   Andrew Lunn <andrew@lunn.ch>
To:     Samin Guo <samin.guo@starfivetech.com>
Cc:     linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
        netdev@vger.kernel.org, Peter Geis <pgwipeout@gmail.com>,
        Frank <Frank.Sae@motor-comm.com>,
        "David S . Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Rob Herring <robh+dt@kernel.org>,
        Conor Dooley <conor@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Heiner Kallweit <hkallweit1@gmail.com>,
        Russell King <linux@armlinux.org.uk>,
        Yanhong Wang <yanhong.wang@starfivetech.com>
Subject: Re: [PATCH v5 1/2] dt-bindings: net: motorcomm: Add pad driver
 strength cfg
Message-ID: <0cd8b154-d255-4c16-b76d-9d3b036f3093@lunn.ch>
References: <20230720111509.21843-1-samin.guo@starfivetech.com>
 <20230720111509.21843-2-samin.guo@starfivetech.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20230720111509.21843-2-samin.guo@starfivetech.com>
Precedence: bulk

> +  motorcomm,rx-clk-drv-microamp:
> +    description: |
> +      drive strength of rx_clk rgmii pad.
> +      The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can
> +      be configured with hardware pull-up resistors to match the SOC voltage
> +      (usually 1.8V).
> +      The software can read the registers to obtain the LDO voltage and configure
> +      the legal drive strength(curren).
> +      =====================================================
> +      | voltage |        curren Available (uA)            |

current has a t.

> +      =====================================================
> +      | voltage |        curren Available (uA)            |

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew