Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Thu, 20 Jul 2023 22:47:59 +0300
From:   Dmitry Rokosov <ddrokosov@sberdevices.ru>
To:     Huqiang Qin <huqiang.qin@amlogic.com>
CC:     <neil.armstrong@linaro.org>, <khilman@baylibre.com>,
        <jbrunet@baylibre.com>, <martin.blumenstingl@googlemail.com>,
        <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
        <conor+dt@kernel.org>, <linux-arm-kernel@lists.infradead.org>,
        <linux-amlogic@lists.infradead.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH V2] arm64: dts: Add gpio_intc node and pinctrl node for
 Amlogic C3 SoCs
Message-ID: <20230720194759.es53r5d5w657j6ce@CAB-WSD-L081021>
References: <20230720114639.833436-1-huqiang.qin@amlogic.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: inline
In-Reply-To: <20230720114639.833436-1-huqiang.qin@amlogic.com>
User-Agent: NeoMutt/20220415
Precedence: bulk

On Thu, Jul 20, 2023 at 07:46:39PM +0800, Huqiang Qin wrote:
> Add gpio interrupt controller device and pinctrl device.
> 
> Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>

Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>

> ---
> 
> V1 -> V2: Nodes are sorted by address offset.
> 
>  arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 26 +++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> index 60ad4f3eef9d..5a3725f6cf3d 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> @@ -72,6 +72,32 @@ apb4: bus@fe000000 {
>  			#size-cells = <2>;
>  			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
>  
> +			periphs_pinctrl: pinctrl@4000 {
> +				compatible = "amlogic,c3-periphs-pinctrl";
> +				#address-cells = <2>;
> +				#size-cells = <2>;
> +				ranges;
> +
> +				gpio: bank@4000 {
> +					reg = <0x0 0x4000 0x0 0x004c>,
> +					      <0x0 0x4100 0x0 0x01de>;
> +					reg-names = "mux", "gpio";
> +					gpio-controller;
> +					#gpio-cells = <2>;
> +					gpio-ranges = <&periphs_pinctrl 0 0 55>;
> +				};
> +			};
> +
> +			gpio_intc: interrupt-controller@4080 {
> +				compatible = "amlogic,meson-gpio-intc",
> +					     "amlogic,c3-gpio-intc";
> +				reg = <0x0 0x4080 0x0 0x0020>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				amlogic,channel-interrupts =
> +					<10 11 12 13 14 15 16 17 18 19 20 21>;
> +			};
> +
>  			uart_b: serial@7a000 {
>  				compatible = "amlogic,meson-s4-uart",
>  					   "amlogic,meson-ao-uart";
> -- 
> 2.37.1
> 
> 
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic

-- 
Thank you,
Dmitry