Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Fri, 21 Jul 2023 10:18:17 +0100
From:   Conor Dooley <conor@kernel.org>
To:     Andrew Lunn <andrew@lunn.ch>
Cc:     Samin Guo <samin.guo@starfivetech.com>,
        linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
        netdev@vger.kernel.org, Peter Geis <pgwipeout@gmail.com>,
        Frank <Frank.Sae@motor-comm.com>,
        "David S . Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Heiner Kallweit <hkallweit1@gmail.com>,
        Russell King <linux@armlinux.org.uk>,
        Yanhong Wang <yanhong.wang@starfivetech.com>
Subject: Re: [PATCH v5 1/2] dt-bindings: net: motorcomm: Add pad driver
 strength cfg
Message-ID: <20230721-liquid-stench-3721d2483433@spud>
References: <20230720111509.21843-1-samin.guo@starfivetech.com>
 <20230720111509.21843-2-samin.guo@starfivetech.com>
 <0cd8b154-d255-4c16-b76d-9d3b036f3093@lunn.ch>
MIME-Version: 1.0
Content-Type: multipart/signed; micalg=pgp-sha256;
        protocol="application/pgp-signature"; boundary="nX7BpCsPop1fJgk1"
Content-Disposition: inline
In-Reply-To: <0cd8b154-d255-4c16-b76d-9d3b036f3093@lunn.ch>
Precedence: bulk


--nX7BpCsPop1fJgk1
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On Thu, Jul 20, 2023 at 06:00:15PM +0200, Andrew Lunn wrote:
> > +  motorcomm,rx-clk-drv-microamp:
> > +    description: |
> > +      drive strength of rx_clk rgmii pad.
> > +      The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO vol=
tage can
> > +      be configured with hardware pull-up resistors to match the SOC v=
oltage
> > +      (usually 1.8V).
> > +      The software can read the registers to obtain the LDO voltage an=
d configure
> > +      the legal drive strength(curren).
> > +      =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D
> > +      | voltage |        curren Available (uA)            |
>=20
> current has a t.
>=20
> > +      =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D
> > +      | voltage |        curren Available (uA)            |
>=20
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>

With the fixup,
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.


--nX7BpCsPop1fJgk1
Content-Type: application/pgp-signature; name="signature.asc"

-----BEGIN PGP SIGNATURE-----

iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZLpNWQAKCRB4tDGHoIJi
0nTzAP0ckflSUS82Xtk5G/0CSY+mIXDKdGQzxx8RPffLo59tfAD+LNoSTLxCZ9iB
x31NhCi8qO6X88lBOMyPXJgPGlkeLg0=
=Z4dn
-----END PGP SIGNATURE-----

--nX7BpCsPop1fJgk1--