Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <e225fa01-c3be-8bfc-03de-59b507c70d3b@quicinc.com>
Date:   Sun, 23 Jul 2023 20:29:47 +0530
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:102.0) Gecko/20100101
 Thunderbird/102.11.1
Subject: Re: [PATCH v9 03/10] usb: dwc3: core: Access XHCI address space
 temporarily to read port info
To:     Johan Hovold <johan@kernel.org>
CC:     Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        "Andy Gross" <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        "Konrad Dybcio" <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Felipe Balbi <balbi@kernel.org>,
        Wesley Cheng <quic_wcheng@quicinc.com>,
        <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <quic_pkondeti@quicinc.com>, <quic_ppratap@quicinc.com>,
        <quic_jackp@quicinc.com>, <quic_harshq@quicinc.com>,
        <ahalaney@redhat.com>, <quic_shazhuss@quicinc.com>
References: <20230621043628.21485-1-quic_kriskura@quicinc.com>
 <20230621043628.21485-4-quic_kriskura@quicinc.com>
 <ZJrL5SXrSiYbvq2o@hovoldconsulting.com>
Content-Language: en-US
From:   Krishna Kurapati PSSNV <quic_kriskura@quicinc.com>
In-Reply-To: <ZJrL5SXrSiYbvq2o@hovoldconsulting.com>
Content-Type: text/plain; charset="UTF-8"; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 6/27/2023 5:15 PM, Johan Hovold wrote:
> On Wed, Jun 21, 2023 at 10:06:21AM +0530, Krishna Kurapati wrote:
>> Currently host-only capable DWC3 controllers support Multiport.
>> Temporarily map XHCI address space for host-only controllers and parse
>> XHCI Extended Capabilities registers to read number of usb2 ports and
>> usb3 ports present on multiport controller. Each USB Port is at least HS
>> capable.
>>
>> The port info for usb2 and usb3 phy are identified as num_usb2_ports
>> and num_usb3_ports. The intention is as follows:
>>
>> Wherever we need to perform phy operations like:
>>
>> LOOP_OVER_NUMBER_OF_AVAILABLE_PORTS()
>> {
>> 	phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
>> 	phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
>> }
>>
>> If number of usb2 ports is 3, loop can go from index 0-2 for
>> usb2_generic_phy. If number of usb3-ports is 2, we don't know for sure,
>> if the first 2 ports are SS capable or some other ports like (2 and 3)
>> are SS capable. So instead, num_usb2_ports is used to loop around all
>> phy's (both hs and ss) for performing phy operations. If any
>> usb3_generic_phy turns out to be NULL, phy operation just bails out.
>>
>> num_usb3_ports is used to modify GUSB3PIPECTL registers while setting up
>> phy's as we need to know how many SS capable ports are there for this.
>>
>> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
>> ---
>>   drivers/usb/dwc3/core.c | 62 +++++++++++++++++++++++++++++++++++++++++
>>   drivers/usb/dwc3/core.h |  9 ++++++
>>   2 files changed, 71 insertions(+)
>>
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index f6689b731718..32ec05fc242b 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -39,6 +39,7 @@
>>   #include "io.h"
>>   
>>   #include "debug.h"
>> +#include "../host/xhci-ext-caps.h"
>>   
>>   #define DWC3_DEFAULT_AUTOSUSPEND_DELAY	5000 /* ms */
>>   
>> @@ -1767,6 +1768,52 @@ static int dwc3_get_clocks(struct dwc3 *dwc)
>>   	return 0;
>>   }
>>   
>> +static int dwc3_read_port_info(struct dwc3 *dwc)
>> +{
>> +	void __iomem *base;
>> +	u8 major_revision;
>> +	u32 offset = 0;
>> +	int ret = 0;
> 
> ret is never modified, so drop and return 0 unconditionally below.
> 
> You can add it back later in the series when you start using it.
> 
>> +	u32 val;
>> +
>> +	/*
>> +	 * Remap xHCI address space to access XHCI ext cap regs,
>> +	 * since it is needed to get port info.
>> +	 */
>> +	base = ioremap(dwc->xhci_resources[0].start,
>> +				resource_size(&dwc->xhci_resources[0]));
>> +	if (IS_ERR(base))
>> +		return PTR_ERR(base);
>> +
>> +	do {
>> +		offset = xhci_find_next_ext_cap(base, offset,
>> +				XHCI_EXT_CAPS_PROTOCOL);
>> +
> 
> You can drop this newline.
> 
>> +		if (!offset)
>> +			break;
>> +
>> +		val = readl(base + offset);
>> +		major_revision = XHCI_EXT_PORT_MAJOR(val);
>> +
>> +		val = readl(base + offset + 0x08);
>> +		if (major_revision == 0x03) {
>> +			dwc->num_usb3_ports += XHCI_EXT_PORT_COUNT(val);
>> +		} else if (major_revision <= 0x02) {
>> +			dwc->num_usb2_ports += XHCI_EXT_PORT_COUNT(val);
>> +		} else {
>> +			dev_err(dwc->dev,
>> +				"Unrecognized port major revision %d\n",
>> +							major_revision);
>> +		}
>> +	} while (1);
>> +
>> +	dev_dbg(dwc->dev, "hs-ports: %u ss-ports: %u\n",
>> +			dwc->num_usb2_ports, dwc->num_usb3_ports);
>> +
>> +	iounmap(base);
> 
> Nit: I'd add a newline here.
> 
>> +	return ret;
>> +}
>> +
>>   static int dwc3_probe(struct platform_device *pdev)
>>   {
>>   	struct device		*dev = &pdev->dev;
>> @@ -1774,6 +1821,7 @@ static int dwc3_probe(struct platform_device *pdev)
>>   	void __iomem		*regs;
>>   	struct dwc3		*dwc;
>>   	int			ret;
>> +	unsigned int		hw_mode;
>>   
>>   	dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL);
>>   	if (!dwc)
>> @@ -1854,6 +1902,20 @@ static int dwc3_probe(struct platform_device *pdev)
>>   			goto err_disable_clks;
>>   	}
>>   
>> +	/*
>> +	 * Currently only DWC3 controllers that are host-only capable
>> +	 * support Multiport.
>> +	 */
>> +	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
>> +	if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) {
>> +		ret = dwc3_read_port_info(dwc);
>> +		if (ret)
>> +			goto err_disable_clks;
>> +	} else {
>> +		dwc->num_usb2_ports = 1;
>> +		dwc->num_usb3_ports = 1;
>> +	}
>> +
>>   	spin_lock_init(&dwc->lock);
>>   	mutex_init(&dwc->mutex);
>>   
>> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
>> index 8b1295e4dcdd..42fb17aa66fa 100644
>> --- a/drivers/usb/dwc3/core.h
>> +++ b/drivers/usb/dwc3/core.h
>> @@ -33,6 +33,10 @@
>>   
>>   #include <linux/power_supply.h>
>>   
>> +#define XHCI_EXT_PORT_MAJOR(x)	(((x) >> 24) & 0xff)
>> +#define XHCI_EXT_PORT_MINOR(x)	(((x) >> 16) & 0xff)
>> +#define XHCI_EXT_PORT_COUNT(x)	(((x) >> 8) & 0xff)
> 
> Again, don't copy defines from xhci.
> 
> Looks like these should be moved to the xhci-ext-caps.h header along
> with struct xhci_protocol_caps.
> 
Hi Johan,

Moving the defines would be sufficient right ? Just wanted to know if 
there is any reason you are suggesting to move the structure as well so 
that I can update commit text accordingly.

Regards,
Krishna,

>> +
>>   #define DWC3_MSG_MAX	500
>>   
>>   /* Global constants */
>> @@ -1029,6 +1033,8 @@ struct dwc3_scratchpad_array {
>>    * @usb3_phy: pointer to USB3 PHY
>>    * @usb2_generic_phy: pointer to USB2 PHY
>>    * @usb3_generic_phy: pointer to USB3 PHY
>> + * @num_usb2_ports: number of USB2 ports.
>> + * @num_usb3_ports: number of USB3 ports.
> 
> Again, please drop the full stops ('.').
> 
> Johan