Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Authenticated-By: 
From:   Stanley Chang <stanley_chang@realtek.com>
To:     Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC:     Stanley Chang <stanley_chang@realtek.com>,
        Vinod Koul <vkoul@kernel.org>,
        Kishon Vijay Abraham I <kishon@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Alan Stern <stern@rowland.harvard.edu>,
        Ray Chi <raychi@google.com>, Roy Luo <royluo@google.com>,
        Bagas Sanjaya <bagasdotme@gmail.com>,
        Flavio Suligoi <f.suligoi@asem.it>,
        <linux-phy@lists.infradead.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <linux-usb@vger.kernel.org>
Subject: [PATCH v9 3/5] phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY
Date:   Tue, 25 Jul 2023 11:31:54 +0800
Message-ID: <20230725033318.8361-3-stanley_chang@realtek.com>
In-Reply-To: <20230725033318.8361-1-stanley_chang@realtek.com>
References: <20230725033318.8361-1-stanley_chang@realtek.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 7BIT
Content-Type:   text/plain; charset=US-ASCII
Precedence: bulk

Realtek DHC (digital home center) RTD SoCs support DWC3 XHCI USB
controller. Added the driver to drive the USB 3.0 PHY transceivers.

Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
---
v8 to v9 change:
    No change
v7 to v8 change:
    No change
v6 to v7 change:
    No change
v5 to v6 change:
    No change
v4 to v5 change:
    1. Remove the compatible realtek,usb3phy.
    2. Remove the set_parameter in debugfs.
    3. Revise the error and debug log.
v3 to v4 change:
    1. Remove the parameter and non hardware properties from dts.
       Add the compatible data included the config and parameter.
    2. Fix the warning for checkpatch with strict.
    3. Remove useless debug messages.
    4. Fix the incorrect or useless "if() return" which pointer check.
v2 to v3 change:
    1. Broken down into two patches, one for each of USB 2 & 3 PHY.
    2. Removed parameter v1 support for simplification.
    3. Used remove_new for driver remove callback.
v1 to v2 change:
    1. Move the drivers to drivers/phy/ for generic phy driver
    2. Use the generic phy driver api to initialize phy
    3. Use readl/writel to instead phy_read/phy_write directly.
    4. Use read_poll_timeout() in function utmi_wait_register.
    5. Revised some coding styles.
    6. fix the compiler warning for kernel test robot.
---
 drivers/phy/realtek/Kconfig        |  11 +
 drivers/phy/realtek/Makefile       |   1 +
 drivers/phy/realtek/phy-rtk-usb3.c | 766 +++++++++++++++++++++++++++++
 3 files changed, 778 insertions(+)
 create mode 100644 drivers/phy/realtek/phy-rtk-usb3.c

diff --git a/drivers/phy/realtek/Kconfig b/drivers/phy/realtek/Kconfig
index 2f2f453729d5..a5a5a71edc9c 100644
--- a/drivers/phy/realtek/Kconfig
+++ b/drivers/phy/realtek/Kconfig
@@ -12,3 +12,14 @@ config PHY_RTK_RTD_USB2PHY
 	  The DHC (digital home center) RTD series SoCs used the Synopsys
 	  DWC3 USB IP. This driver will do the PHY initialization
 	  of the parameters.
+
+config PHY_RTK_RTD_USB3PHY
+	tristate "Realtek RTD USB3 PHY Transceiver Driver"
+	depends on USB_SUPPORT
+	select GENERIC_PHY
+	select USB_PHY
+	help
+	  Enable this to support Realtek SoC USB3 phy transceiver.
+	  The DHC (digital home center) RTD series SoCs used the Synopsys
+	  DWC3 USB IP. This driver will do the PHY initialization
+	  of the parameters.
diff --git a/drivers/phy/realtek/Makefile b/drivers/phy/realtek/Makefile
index cf5d440841a2..ed7b47ff8a26 100644
--- a/drivers/phy/realtek/Makefile
+++ b/drivers/phy/realtek/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_PHY_RTK_RTD_USB2PHY)	+= phy-rtk-usb2.o
+obj-$(CONFIG_PHY_RTK_RTD_USB3PHY)	+= phy-rtk-usb3.o
diff --git a/drivers/phy/realtek/phy-rtk-usb3.c b/drivers/phy/realtek/phy-rtk-usb3.c
new file mode 100644
index 000000000000..6050f1ef4f6b
--- /dev/null
+++ b/drivers/phy/realtek/phy-rtk-usb3.c
@@ -0,0 +1,766 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  phy-rtk-usb3.c RTK usb3.0 phy driver
+ *
+ * copyright (c) 2023 realtek semiconductor corporation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/uaccess.h>
+#include <linux/debugfs.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/regmap.h>
+#include <linux/sys_soc.h>
+#include <linux/mfd/syscon.h>
+#include <linux/phy/phy.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/phy.h>
+
+#define USB_MDIO_CTRL_PHY_BUSY BIT(7)
+#define USB_MDIO_CTRL_PHY_WRITE BIT(0)
+#define USB_MDIO_CTRL_PHY_ADDR_SHIFT 8
+#define USB_MDIO_CTRL_PHY_DATA_SHIFT 16
+
+#define MAX_USB_PHY_DATA_SIZE 0x30
+#define PHY_ADDR_0X09 0x09
+#define PHY_ADDR_0X0B 0x0b
+#define PHY_ADDR_0X0D 0x0d
+#define PHY_ADDR_0X10 0x10
+#define PHY_ADDR_0X1F 0x1f
+#define PHY_ADDR_0X20 0x20
+#define PHY_ADDR_0X21 0x21
+#define PHY_ADDR_0X30 0x30
+
+#define REG_0X09_FORCE_CALIBRATION BIT(9)
+#define REG_0X0B_RX_OFFSET_RANGE_MASK 0xc
+#define REG_0X0D_RX_DEBUG_TEST_EN BIT(6)
+#define REG_0X10_DEBUG_MODE_SETTING 0x3c0
+#define REG_0X10_DEBUG_MODE_SETTING_MASK 0x3f8
+#define REG_0X1F_RX_OFFSET_CODE_MASK 0x1e
+
+#define USB_U3_TX_LFPS_SWING_TRIM_SHIFT 4
+#define USB_U3_TX_LFPS_SWING_TRIM_MASK 0xf
+#define AMPLITUDE_CONTROL_COARSE_MASK 0xff
+#define AMPLITUDE_CONTROL_FINE_MASK 0xffff
+#define AMPLITUDE_CONTROL_COARSE_DEFAULT 0xff
+#define AMPLITUDE_CONTROL_FINE_DEFAULT 0xffff
+
+#define PHY_ADDR_MAP_ARRAY_INDEX(addr) (addr)
+#define ARRAY_INDEX_MAP_PHY_ADDR(index) (index)
+
+struct phy_reg {
+	void __iomem *reg_mdio_ctl;
+};
+
+struct phy_data {
+	u8 addr;
+	u16 data;
+};
+
+struct phy_cfg {
+	int param_size;
+	struct phy_data param[MAX_USB_PHY_DATA_SIZE];
+
+	bool check_efuse;
+	bool do_toggle;
+	bool do_toggle_once;
+	bool use_default_parameter;
+	bool check_rx_front_end_offset;
+};
+
+struct phy_parameter {
+	struct phy_reg phy_reg;
+
+	/* Get from efuse */
+	u8 efuse_usb_u3_tx_lfps_swing_trim;
+
+	/* Get from dts */
+	u32 amplitude_control_coarse;
+	u32 amplitude_control_fine;
+};
+
+struct rtk_phy {
+	struct usb_phy phy;
+	struct device *dev;
+
+	struct phy_cfg *phy_cfg;
+	int num_phy;
+	struct phy_parameter *phy_parameter;
+
+	struct dentry *debug_dir;
+};
+
+#define PHY_IO_TIMEOUT_USEC		(50000)
+#define PHY_IO_DELAY_US			(100)
+
+static inline int utmi_wait_register(void __iomem *reg, u32 mask, u32 result)
+{
+	int ret;
+	unsigned int val;
+
+	ret = read_poll_timeout(readl, val, ((val & mask) == result),
+				PHY_IO_DELAY_US, PHY_IO_TIMEOUT_USEC, false, reg);
+	if (ret) {
+		pr_err("%s can't program USB phy\n", __func__);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int rtk_phy3_wait_vbusy(struct phy_reg *phy_reg)
+{
+	return utmi_wait_register(phy_reg->reg_mdio_ctl, USB_MDIO_CTRL_PHY_BUSY, 0);
+}
+
+static u16 rtk_phy_read(struct phy_reg *phy_reg, char addr)
+{
+	unsigned int tmp;
+	u32 value;
+
+	tmp = (addr << USB_MDIO_CTRL_PHY_ADDR_SHIFT);
+
+	writel(tmp, phy_reg->reg_mdio_ctl);
+
+	rtk_phy3_wait_vbusy(phy_reg);
+
+	value = readl(phy_reg->reg_mdio_ctl);
+	value = value >> USB_MDIO_CTRL_PHY_DATA_SHIFT;
+
+	return (u16)value;
+}
+
+static int rtk_phy_write(struct phy_reg *phy_reg, char addr, u16 data)
+{
+	unsigned int val;
+
+	val = USB_MDIO_CTRL_PHY_WRITE |
+		    (addr << USB_MDIO_CTRL_PHY_ADDR_SHIFT) |
+		    (data << USB_MDIO_CTRL_PHY_DATA_SHIFT);
+
+	writel(val, phy_reg->reg_mdio_ctl);
+
+	rtk_phy3_wait_vbusy(phy_reg);
+
+	return 0;
+}
+
+static void do_rtk_usb3_phy_toggle(struct rtk_phy *rtk_phy, int index, bool connect)
+{
+	struct phy_cfg *phy_cfg = rtk_phy->phy_cfg;
+	struct phy_reg *phy_reg;
+	struct phy_parameter *phy_parameter;
+	struct phy_data *phy_data;
+	u8 addr;
+	u16 data;
+	int i;
+
+	phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index];
+	phy_reg = &phy_parameter->phy_reg;
+
+	if (!phy_cfg->do_toggle)
+		return;
+
+	i = PHY_ADDR_MAP_ARRAY_INDEX(PHY_ADDR_0X09);
+	phy_data = phy_cfg->param + i;
+	addr = phy_data->addr;
+	data = phy_data->data;
+
+	if (!addr && !data) {
+		addr = PHY_ADDR_0X09;
+		data = rtk_phy_read(phy_reg, addr);
+		phy_data->addr = addr;
+		phy_data->data = data;
+	}
+
+	rtk_phy_write(phy_reg, addr, data & (~REG_0X09_FORCE_CALIBRATION));
+	mdelay(1);
+	rtk_phy_write(phy_reg, addr, data | REG_0X09_FORCE_CALIBRATION);
+}
+
+static int do_rtk_phy_init(struct rtk_phy *rtk_phy, int index)
+{
+	struct phy_cfg *phy_cfg;
+	struct phy_reg *phy_reg;
+	struct phy_parameter *phy_parameter;
+	int i = 0;
+
+	phy_cfg = rtk_phy->phy_cfg;
+	phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index];
+	phy_reg = &phy_parameter->phy_reg;
+
+	if (phy_cfg->use_default_parameter)
+		goto do_toggle;
+
+	for (i = 0; i < phy_cfg->param_size; i++) {
+		struct phy_data *phy_data = phy_cfg->param + i;
+		u8 addr = phy_data->addr;
+		u16 data = phy_data->data;
+
+		if (!addr && !data)
+			continue;
+
+		rtk_phy_write(phy_reg, addr, data);
+	}
+
+do_toggle:
+	if (phy_cfg->do_toggle_once)
+		phy_cfg->do_toggle = true;
+
+	do_rtk_usb3_phy_toggle(rtk_phy, index, false);
+
+	if (phy_cfg->do_toggle_once) {
+		u16 check_value = 0;
+		int count = 10;
+		u16 value_0x0d, value_0x10;
+
+		/* Enable Debug mode by set 0x0D and 0x10 */
+		value_0x0d = rtk_phy_read(phy_reg, PHY_ADDR_0X0D);
+		value_0x10 = rtk_phy_read(phy_reg, PHY_ADDR_0X10);
+
+		rtk_phy_write(phy_reg, PHY_ADDR_0X0D,
+			      value_0x0d | REG_0X0D_RX_DEBUG_TEST_EN);
+		rtk_phy_write(phy_reg, PHY_ADDR_0X10,
+			      (value_0x10 & ~REG_0X10_DEBUG_MODE_SETTING_MASK) |
+			      REG_0X10_DEBUG_MODE_SETTING);
+
+		check_value = rtk_phy_read(phy_reg, PHY_ADDR_0X30);
+
+		while (!(check_value & BIT(15))) {
+			check_value = rtk_phy_read(phy_reg, PHY_ADDR_0X30);
+			mdelay(1);
+			if (count-- < 0)
+				break;
+		}
+
+		if (!(check_value & BIT(15)))
+			dev_info(rtk_phy->dev, "toggle fail addr=0x%02x, data=0x%04x\n",
+				 PHY_ADDR_0X30, check_value);
+
+		/* Disable Debug mode by set 0x0D and 0x10 to default*/
+		rtk_phy_write(phy_reg, PHY_ADDR_0X0D, value_0x0d);
+		rtk_phy_write(phy_reg, PHY_ADDR_0X10, value_0x10);
+
+		phy_cfg->do_toggle = false;
+	}
+
+	if (phy_cfg->check_rx_front_end_offset) {
+		u16 rx_offset_code, rx_offset_range;
+		u16 code_mask = REG_0X1F_RX_OFFSET_CODE_MASK;
+		u16 range_mask = REG_0X0B_RX_OFFSET_RANGE_MASK;
+		bool do_update = false;
+
+		rx_offset_code = rtk_phy_read(phy_reg, PHY_ADDR_0X1F);
+		if (((rx_offset_code & code_mask) == 0x0) ||
+		    ((rx_offset_code & code_mask) == code_mask))
+			do_update = true;
+
+		rx_offset_range = rtk_phy_read(phy_reg, PHY_ADDR_0X0B);
+		if (((rx_offset_range & range_mask) == range_mask) && do_update) {
+			dev_warn(rtk_phy->dev, "Don't update rx_offset_range (rx_offset_code=0x%x, rx_offset_range=0x%x)\n",
+				 rx_offset_code, rx_offset_range);
+			do_update = false;
+		}
+
+		if (do_update) {
+			u16 tmp1, tmp2;
+
+			tmp1 = rx_offset_range & (~range_mask);
+			tmp2 = rx_offset_range & range_mask;
+			tmp2 += (1 << 2);
+			rx_offset_range = tmp1 | (tmp2 & range_mask);
+			rtk_phy_write(phy_reg, PHY_ADDR_0X0B, rx_offset_range);
+			goto do_toggle;
+		}
+	}
+
+	return 0;
+}
+
+static int rtk_phy_init(struct phy *phy)
+{
+	struct rtk_phy *rtk_phy = phy_get_drvdata(phy);
+	int ret = 0;
+	int i;
+	unsigned long phy_init_time = jiffies;
+
+	for (i = 0; i < rtk_phy->num_phy; i++)
+		ret = do_rtk_phy_init(rtk_phy, i);
+
+	dev_dbg(rtk_phy->dev, "Initialized RTK USB 3.0 PHY (take %dms)\n",
+		jiffies_to_msecs(jiffies - phy_init_time));
+
+	return ret;
+}
+
+static int rtk_phy_exit(struct phy *phy)
+{
+	return 0;
+}
+
+static const struct phy_ops ops = {
+	.init		= rtk_phy_init,
+	.exit		= rtk_phy_exit,
+	.owner		= THIS_MODULE,
+};
+
+static void rtk_phy_toggle(struct usb_phy *usb3_phy, bool connect, int port)
+{
+	int index = port;
+	struct rtk_phy *rtk_phy = NULL;
+
+	rtk_phy = dev_get_drvdata(usb3_phy->dev);
+
+	if (index > rtk_phy->num_phy) {
+		dev_err(rtk_phy->dev, "%s: The port=%d is not in usb phy (num_phy=%d)\n",
+			__func__, index, rtk_phy->num_phy);
+		return;
+	}
+
+	do_rtk_usb3_phy_toggle(rtk_phy, index, connect);
+}
+
+static int rtk_phy_notify_port_status(struct usb_phy *x, int port,
+				      u16 portstatus, u16 portchange)
+{
+	bool connect = false;
+
+	pr_debug("%s port=%d portstatus=0x%x portchange=0x%x\n",
+		 __func__, port, (int)portstatus, (int)portchange);
+	if (portstatus & USB_PORT_STAT_CONNECTION)
+		connect = true;
+
+	if (portchange & USB_PORT_STAT_C_CONNECTION)
+		rtk_phy_toggle(x, connect, port);
+
+	return 0;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static struct dentry *create_phy_debug_root(void)
+{
+	struct dentry *phy_debug_root;
+
+	phy_debug_root = debugfs_lookup("phy", usb_debug_root);
+	if (!phy_debug_root)
+		phy_debug_root = debugfs_create_dir("phy", usb_debug_root);
+
+	return phy_debug_root;
+}
+
+static int rtk_usb3_parameter_show(struct seq_file *s, void *unused)
+{
+	struct rtk_phy *rtk_phy = s->private;
+	struct phy_cfg *phy_cfg;
+	int i, index;
+
+	phy_cfg = rtk_phy->phy_cfg;
+
+	seq_puts(s, "Property:\n");
+	seq_printf(s, "  check_efuse: %s\n",
+		   phy_cfg->check_efuse ? "Enable" : "Disable");
+	seq_printf(s, "  do_toggle: %s\n",
+		   phy_cfg->do_toggle ? "Enable" : "Disable");
+	seq_printf(s, "  do_toggle_once: %s\n",
+		   phy_cfg->do_toggle_once ? "Enable" : "Disable");
+	seq_printf(s, "  use_default_parameter: %s\n",
+		   phy_cfg->use_default_parameter ? "Enable" : "Disable");
+
+	for (index = 0; index < rtk_phy->num_phy; index++) {
+		struct phy_reg *phy_reg;
+		struct phy_parameter *phy_parameter;
+
+		phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index];
+		phy_reg = &phy_parameter->phy_reg;
+
+		seq_printf(s, "PHY %d:\n", index);
+
+		for (i = 0; i < phy_cfg->param_size; i++) {
+			struct phy_data *phy_data = phy_cfg->param + i;
+			u8 addr = ARRAY_INDEX_MAP_PHY_ADDR(i);
+			u16 data = phy_data->data;
+
+			if (!phy_data->addr && !data)
+				seq_printf(s, "  addr = 0x%02x, data = none   ==> read value = 0x%04x\n",
+					   addr, rtk_phy_read(phy_reg, addr));
+			else
+				seq_printf(s, "  addr = 0x%02x, data = 0x%04x ==> read value = 0x%04x\n",
+					   addr, data, rtk_phy_read(phy_reg, addr));
+		}
+
+		seq_puts(s, "PHY Property:\n");
+		seq_printf(s, "  efuse_usb_u3_tx_lfps_swing_trim: 0x%x\n",
+			   (int)phy_parameter->efuse_usb_u3_tx_lfps_swing_trim);
+		seq_printf(s, "  amplitude_control_coarse: 0x%x\n",
+			   (int)phy_parameter->amplitude_control_coarse);
+		seq_printf(s, "  amplitude_control_fine: 0x%x\n",
+			   (int)phy_parameter->amplitude_control_fine);
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(rtk_usb3_parameter);
+
+static inline void create_debug_files(struct rtk_phy *rtk_phy)
+{
+	struct dentry *phy_debug_root = NULL;
+
+	phy_debug_root = create_phy_debug_root();
+
+	if (!phy_debug_root)
+		return;
+
+	rtk_phy->debug_dir = debugfs_create_dir(dev_name(rtk_phy->dev), phy_debug_root);
+	if (!rtk_phy->debug_dir)
+		return;
+
+	if (!debugfs_create_file("parameter", 0444, rtk_phy->debug_dir, rtk_phy,
+				 &rtk_usb3_parameter_fops))
+		goto file_error;
+
+	return;
+
+file_error:
+	debugfs_remove_recursive(rtk_phy->debug_dir);
+}
+
+static inline void remove_debug_files(struct rtk_phy *rtk_phy)
+{
+	debugfs_remove_recursive(rtk_phy->debug_dir);
+}
+#else
+static inline void create_debug_files(struct rtk_phy *rtk_phy) { }
+static inline void remove_debug_files(struct rtk_phy *rtk_phy) { }
+#endif /* CONFIG_DEBUG_FS */
+
+static int get_phy_data_by_efuse(struct rtk_phy *rtk_phy,
+				 struct phy_parameter *phy_parameter, int index)
+{
+	struct phy_cfg *phy_cfg = rtk_phy->phy_cfg;
+	u8 value = 0;
+	struct nvmem_cell *cell;
+
+	if (!phy_cfg->check_efuse)
+		goto out;
+
+	cell = nvmem_cell_get(rtk_phy->dev, "usb_u3_tx_lfps_swing_trim");
+	if (IS_ERR(cell)) {
+		dev_dbg(rtk_phy->dev, "%s no usb_u3_tx_lfps_swing_trim: %ld\n",
+			__func__, PTR_ERR(cell));
+	} else {
+		unsigned char *buf;
+		size_t buf_size;
+
+		buf = nvmem_cell_read(cell, &buf_size);
+		value = buf[0] & USB_U3_TX_LFPS_SWING_TRIM_MASK;
+
+		kfree(buf);
+		nvmem_cell_put(cell);
+	}
+
+	if (value > 0 && value < 0x8)
+		phy_parameter->efuse_usb_u3_tx_lfps_swing_trim = 0x8;
+	else
+		phy_parameter->efuse_usb_u3_tx_lfps_swing_trim = (u8)value;
+
+out:
+	return 0;
+}
+
+static void update_amplitude_control_value(struct rtk_phy *rtk_phy,
+					   struct phy_parameter *phy_parameter)
+{
+	struct phy_cfg *phy_cfg;
+	struct phy_reg *phy_reg;
+
+	phy_reg = &phy_parameter->phy_reg;
+	phy_cfg = rtk_phy->phy_cfg;
+
+	if (phy_parameter->amplitude_control_coarse != AMPLITUDE_CONTROL_COARSE_DEFAULT) {
+		u16 val_mask = AMPLITUDE_CONTROL_COARSE_MASK;
+		u16 data;
+
+		if (!phy_cfg->param[PHY_ADDR_0X20].addr && !phy_cfg->param[PHY_ADDR_0X20].data) {
+			phy_cfg->param[PHY_ADDR_0X20].addr = PHY_ADDR_0X20;
+			data = rtk_phy_read(phy_reg, PHY_ADDR_0X20);
+		} else {
+			data = phy_cfg->param[PHY_ADDR_0X20].data;
+		}
+
+		data &= (~val_mask);
+		data |= (phy_parameter->amplitude_control_coarse & val_mask);
+
+		phy_cfg->param[PHY_ADDR_0X20].data = data;
+	}
+
+	if (phy_parameter->efuse_usb_u3_tx_lfps_swing_trim) {
+		u8 efuse_val = phy_parameter->efuse_usb_u3_tx_lfps_swing_trim;
+		u16 val_mask = USB_U3_TX_LFPS_SWING_TRIM_MASK;
+		int val_shift = USB_U3_TX_LFPS_SWING_TRIM_SHIFT;
+		u16 data;
+
+		if (!phy_cfg->param[PHY_ADDR_0X20].addr && !phy_cfg->param[PHY_ADDR_0X20].data) {
+			phy_cfg->param[PHY_ADDR_0X20].addr = PHY_ADDR_0X20;
+			data = rtk_phy_read(phy_reg, PHY_ADDR_0X20);
+		} else {
+			data = phy_cfg->param[PHY_ADDR_0X20].data;
+		}
+
+		data &= ~(val_mask << val_shift);
+		data |= ((efuse_val & val_mask) << val_shift);
+
+		phy_cfg->param[PHY_ADDR_0X20].data = data;
+	}
+
+	if (phy_parameter->amplitude_control_fine != AMPLITUDE_CONTROL_FINE_DEFAULT) {
+		u16 val_mask = AMPLITUDE_CONTROL_FINE_MASK;
+
+		if (!phy_cfg->param[PHY_ADDR_0X21].addr && !phy_cfg->param[PHY_ADDR_0X21].data)
+			phy_cfg->param[PHY_ADDR_0X21].addr = PHY_ADDR_0X21;
+
+		phy_cfg->param[PHY_ADDR_0X21].data =
+			    phy_parameter->amplitude_control_fine & val_mask;
+	}
+}
+
+static int parse_phy_data(struct rtk_phy *rtk_phy)
+{
+	struct device *dev = rtk_phy->dev;
+	struct phy_parameter *phy_parameter;
+	int ret = 0;
+	int index;
+
+	rtk_phy->phy_parameter = devm_kzalloc(dev, sizeof(struct phy_parameter) *
+					      rtk_phy->num_phy, GFP_KERNEL);
+	if (!rtk_phy->phy_parameter)
+		return -ENOMEM;
+
+	for (index = 0; index < rtk_phy->num_phy; index++) {
+		phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index];
+
+		phy_parameter->phy_reg.reg_mdio_ctl = of_iomap(dev->of_node, 0) + index;
+
+		/* Amplitude control address 0x20 bit 0 to bit 7 */
+		if (of_property_read_u32(dev->of_node, "realtek,amplitude-control-coarse-tuning",
+					 &phy_parameter->amplitude_control_coarse))
+			phy_parameter->amplitude_control_coarse = AMPLITUDE_CONTROL_COARSE_DEFAULT;
+
+		/* Amplitude control address 0x21 bit 0 to bit 16 */
+		if (of_property_read_u32(dev->of_node, "realtek,amplitude-control-fine-tuning",
+					 &phy_parameter->amplitude_control_fine))
+			phy_parameter->amplitude_control_fine = AMPLITUDE_CONTROL_FINE_DEFAULT;
+
+		get_phy_data_by_efuse(rtk_phy, phy_parameter, index);
+
+		update_amplitude_control_value(rtk_phy, phy_parameter);
+	}
+
+	return ret;
+}
+
+static int rtk_usb3phy_probe(struct platform_device *pdev)
+{
+	struct rtk_phy *rtk_phy;
+	struct device *dev = &pdev->dev;
+	struct phy *generic_phy;
+	struct phy_provider *phy_provider;
+	const struct phy_cfg *phy_cfg;
+	int ret;
+
+	phy_cfg = of_device_get_match_data(dev);
+	if (!phy_cfg) {
+		dev_err(dev, "phy config are not assigned!\n");
+		return -EINVAL;
+	}
+
+	rtk_phy = devm_kzalloc(dev, sizeof(*rtk_phy), GFP_KERNEL);
+	if (!rtk_phy)
+		return -ENOMEM;
+
+	rtk_phy->dev			= &pdev->dev;
+	rtk_phy->phy.dev		= rtk_phy->dev;
+	rtk_phy->phy.label		= "rtk-usb3phy";
+	rtk_phy->phy.notify_port_status = rtk_phy_notify_port_status;
+
+	rtk_phy->phy_cfg = devm_kzalloc(dev, sizeof(*phy_cfg), GFP_KERNEL);
+
+	memcpy(rtk_phy->phy_cfg, phy_cfg, sizeof(*phy_cfg));
+
+	rtk_phy->num_phy = 1;
+
+	ret = parse_phy_data(rtk_phy);
+	if (ret)
+		goto err;
+
+	platform_set_drvdata(pdev, rtk_phy);
+
+	generic_phy = devm_phy_create(rtk_phy->dev, NULL, &ops);
+	if (IS_ERR(generic_phy))
+		return PTR_ERR(generic_phy);
+
+	phy_set_drvdata(generic_phy, rtk_phy);
+
+	phy_provider = devm_of_phy_provider_register(rtk_phy->dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	ret = usb_add_phy_dev(&rtk_phy->phy);
+	if (ret)
+		goto err;
+
+	create_debug_files(rtk_phy);
+
+err:
+	return ret;
+}
+
+static void rtk_usb3phy_remove(struct platform_device *pdev)
+{
+	struct rtk_phy *rtk_phy = platform_get_drvdata(pdev);
+
+	remove_debug_files(rtk_phy);
+
+	usb_remove_phy(&rtk_phy->phy);
+}
+
+static const struct phy_cfg rtd1295_phy_cfg = {
+	.param_size = MAX_USB_PHY_DATA_SIZE,
+	.param = {  [0] = {0x01, 0x4008},  [1] = {0x01, 0xe046},
+		    [2] = {0x02, 0x6046},  [3] = {0x03, 0x2779},
+		    [4] = {0x04, 0x72f5},  [5] = {0x05, 0x2ad3},
+		    [6] = {0x06, 0x000e},  [7] = {0x07, 0x2e00},
+		    [8] = {0x08, 0x3591},  [9] = {0x09, 0x525c},
+		   [10] = {0x0a, 0xa600}, [11] = {0x0b, 0xa904},
+		   [12] = {0x0c, 0xc000}, [13] = {0x0d, 0xef1c},
+		   [14] = {0x0e, 0x2000}, [15] = {0x0f, 0x0000},
+		   [16] = {0x10, 0x000c}, [17] = {0x11, 0x4c00},
+		   [18] = {0x12, 0xfc00}, [19] = {0x13, 0x0c81},
+		   [20] = {0x14, 0xde01}, [21] = {0x15, 0x0000},
+		   [22] = {0x16, 0x0000}, [23] = {0x17, 0x0000},
+		   [24] = {0x18, 0x0000}, [25] = {0x19, 0x4004},
+		   [26] = {0x1a, 0x1260}, [27] = {0x1b, 0xff00},
+		   [28] = {0x1c, 0xcb00}, [29] = {0x1d, 0xa03f},
+		   [30] = {0x1e, 0xc2e0}, [31] = {0x1f, 0x2807},
+		   [32] = {0x20, 0x947a}, [33] = {0x21, 0x88aa},
+		   [34] = {0x22, 0x0057}, [35] = {0x23, 0xab66},
+		   [36] = {0x24, 0x0800}, [37] = {0x25, 0x0000},
+		   [38] = {0x26, 0x040a}, [39] = {0x27, 0x01d6},
+		   [40] = {0x28, 0xf8c2}, [41] = {0x29, 0x3080},
+		   [42] = {0x2a, 0x3082}, [43] = {0x2b, 0x2078},
+		   [44] = {0x2c, 0xffff}, [45] = {0x2d, 0xffff},
+		   [46] = {0x2e, 0x0000}, [47] = {0x2f, 0x0040}, },
+	.check_efuse = false,
+	.do_toggle = true,
+	.do_toggle_once = false,
+	.use_default_parameter = false,
+	.check_rx_front_end_offset = false,
+};
+
+static const struct phy_cfg rtd1619_phy_cfg = {
+	.param_size = MAX_USB_PHY_DATA_SIZE,
+	.param = {  [8] = {0x08, 0x3591},
+		   [38] = {0x26, 0x840b},
+		   [40] = {0x28, 0xf842}, },
+	.check_efuse = false,
+	.do_toggle = true,
+	.do_toggle_once = false,
+	.use_default_parameter = false,
+	.check_rx_front_end_offset = false,
+};
+
+static const struct phy_cfg rtd1319_phy_cfg = {
+	.param_size = MAX_USB_PHY_DATA_SIZE,
+	.param = {  [1] = {0x01, 0xac86},
+		    [6] = {0x06, 0x0003},
+		    [9] = {0x09, 0x924c},
+		   [10] = {0x0a, 0xa608},
+		   [11] = {0x0b, 0xb905},
+		   [14] = {0x0e, 0x2010},
+		   [32] = {0x20, 0x705a},
+		   [33] = {0x21, 0xf645},
+		   [34] = {0x22, 0x0013},
+		   [35] = {0x23, 0xcb66},
+		   [41] = {0x29, 0xff00}, },
+	.check_efuse = true,
+	.do_toggle = true,
+	.do_toggle_once = false,
+	.use_default_parameter = false,
+	.check_rx_front_end_offset = false,
+};
+
+static const struct phy_cfg rtd1619b_phy_cfg = {
+	.param_size = MAX_USB_PHY_DATA_SIZE,
+	.param = {  [1] = {0x01, 0xac8c},
+		    [6] = {0x06, 0x0017},
+		    [9] = {0x09, 0x724c},
+		   [10] = {0x0a, 0xb610},
+		   [11] = {0x0b, 0xb90d},
+		   [13] = {0x0d, 0xef2a},
+		   [15] = {0x0f, 0x9050},
+		   [16] = {0x10, 0x000c},
+		   [32] = {0x20, 0x70ff},
+		   [34] = {0x22, 0x0013},
+		   [35] = {0x23, 0xdb66},
+		   [38] = {0x26, 0x8609},
+		   [41] = {0x29, 0xff13},
+		   [42] = {0x2a, 0x3070}, },
+	.check_efuse = true,
+	.do_toggle = false,
+	.do_toggle_once = true,
+	.use_default_parameter = false,
+	.check_rx_front_end_offset = false,
+};
+
+static const  struct phy_cfg rtd1319d_phy_cfg = {
+	.param_size = MAX_USB_PHY_DATA_SIZE,
+	.param = {  [1] = {0x01, 0xac89},
+		    [4] = {0x04, 0xf2f5},
+		    [6] = {0x06, 0x0017},
+		    [9] = {0x09, 0x424c},
+		   [10] = {0x0a, 0x9610},
+		   [11] = {0x0b, 0x9901},
+		   [12] = {0x0c, 0xf000},
+		   [13] = {0x0d, 0xef2a},
+		   [14] = {0x0e, 0x1000},
+		   [15] = {0x0f, 0x9050},
+		   [32] = {0x20, 0x7077},
+		   [35] = {0x23, 0x0b62},
+		   [37] = {0x25, 0x10ec},
+		   [42] = {0x2a, 0x3070}, },
+	.check_efuse = true,
+	.do_toggle = false,
+	.do_toggle_once = true,
+	.use_default_parameter = false,
+	.check_rx_front_end_offset = true,
+};
+
+static const struct of_device_id usbphy_rtk_dt_match[] = {
+	{ .compatible = "realtek,rtd1295-usb3phy", .data = &rtd1295_phy_cfg },
+	{ .compatible = "realtek,rtd1319-usb3phy", .data = &rtd1319_phy_cfg },
+	{ .compatible = "realtek,rtd1319d-usb3phy", .data = &rtd1319d_phy_cfg },
+	{ .compatible = "realtek,rtd1619-usb3phy", .data = &rtd1619_phy_cfg },
+	{ .compatible = "realtek,rtd1619b-usb3phy", .data = &rtd1619b_phy_cfg },
+	{},
+};
+MODULE_DEVICE_TABLE(of, usbphy_rtk_dt_match);
+
+static struct platform_driver rtk_usb3phy_driver = {
+	.probe		= rtk_usb3phy_probe,
+	.remove_new	= rtk_usb3phy_remove,
+	.driver		= {
+		.name	= "rtk-usb3phy",
+		.of_match_table = usbphy_rtk_dt_match,
+	},
+};
+
+module_platform_driver(rtk_usb3phy_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform: rtk-usb3phy");
+MODULE_AUTHOR("Stanley Chang <stanley_chang@realtek.com>");
+MODULE_DESCRIPTION("Realtek usb 3.0 phy driver");
-- 
2.34.1