Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
MIME-Version: 1.0
References: <20230727085239.4326-1-okan.sahin@analog.com> <20230727085239.4326-3-okan.sahin@analog.com>
In-Reply-To: <20230727085239.4326-3-okan.sahin@analog.com>
From:   Bartosz Golaszewski <brgl@bgdev.pl>
Date:   Thu, 27 Jul 2023 11:09:47 +0200
Message-ID: <CAMRc=MfY+kmBt6nmkPJC=E6u0GP7gSfORkTi8LcaD10+RNp1MQ@mail.gmail.com>
Subject: Re: [PATCH v4 2/2] gpio: ds4520: Add ADI DS4520 GPIO Expander Support
To:     Okan Sahin <okan.sahin@analog.com>
Cc:     Linus Walleij <linus.walleij@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

On Thu, Jul 27, 2023 at 10:53=E2=80=AFAM Okan Sahin <okan.sahin@analog.com>=
 wrote:
>
> The DS4520 is a 9-bit nonvolatile (NV) I/O expander.
> It offers users a digitally programmable alternative
> to hardware jumpers and mechanical switches that are
> being used to control digital logic node.
>
> Signed-off-by: Okan Sahin <okan.sahin@analog.com>
> ---
>  drivers/gpio/Kconfig       | 11 +++++
>  drivers/gpio/Makefile      |  1 +
>  drivers/gpio/gpio-ds4520.c | 89 ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 101 insertions(+)
>  create mode 100644 drivers/gpio/gpio-ds4520.c
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 13be729710f2..5f89e46d6411 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -1000,6 +1000,17 @@ config GPIO_ADNP
>           enough to represent all pins, but the driver will assume a
>           register layout for 64 pins (8 registers).
>
> +config GPIO_DS4520
> +       tristate "DS4520 I2C GPIO expander"
> +       select REGMAP_I2C
> +       select GPIO_REGMAP
> +       help
> +         GPIO driver for ADI DS4520 I2C-based GPIO expander.
> +         Say yes here to enable the GPIO driver for the ADI DS4520 chip.
> +
> +         To compile this driver as a module, choose M here: the module w=
ill
> +         be called gpio-ds4520.
> +
>  config GPIO_GW_PLD
>         tristate "Gateworks PLD GPIO Expander"
>         depends on OF_GPIO
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index c048ba003367..6f8656d5d617 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -52,6 +52,7 @@ obj-$(CONFIG_GPIO_DA9052)             +=3D gpio-da9052.=
o
>  obj-$(CONFIG_GPIO_DA9055)              +=3D gpio-da9055.o
>  obj-$(CONFIG_GPIO_DAVINCI)             +=3D gpio-davinci.o
>  obj-$(CONFIG_GPIO_DLN2)                        +=3D gpio-dln2.o
> +obj-$(CONFIG_GPIO_DS4520)              +=3D gpio-ds4520.o
>  obj-$(CONFIG_GPIO_DWAPB)               +=3D gpio-dwapb.o
>  obj-$(CONFIG_GPIO_EIC_SPRD)            +=3D gpio-eic-sprd.o
>  obj-$(CONFIG_GPIO_EM)                  +=3D gpio-em.o
> diff --git a/drivers/gpio/gpio-ds4520.c b/drivers/gpio/gpio-ds4520.c
> new file mode 100644
> index 000000000000..0a9fdbfed6ee
> --- /dev/null
> +++ b/drivers/gpio/gpio-ds4520.c
> @@ -0,0 +1,89 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2023 Analog Devices, Inc.
> + * Driver for the DS4520 I/O Expander
> + */
> +
> +#include <linux/device.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/gpio/regmap.h>
> +#include <linux/i2c.h>
> +#include <linux/property.h>
> +#include <linux/regmap.h>
> +
> +#define DS4520_PULLUP0         0xF0
> +#define DS4520_IO_CONTROL0     0xF2
> +#define DS4520_IO_STATUS0      0xF8
> +
> +static const struct regmap_config ds4520_regmap_config =3D {
> +       .reg_bits =3D 8,
> +       .val_bits =3D 8,
> +};
> +
> +static int ds4520_gpio_probe(struct i2c_client *client)
> +{
> +       struct gpio_regmap_config config =3D { };
> +       struct device *dev =3D &client->dev;
> +       struct regmap *regmap;
> +       u32 ngpio;
> +       u32 base;
> +       int ret;
> +
> +       ret =3D device_property_read_u32(dev, "reg", &base);
> +       if (ret) {
> +               dev_err_probe(dev, ret,
> +                         "Missing 'reg' property.\n");
> +               return -EINVAL;
> +       }
> +
> +       ret =3D device_property_read_u32(dev, "ngpios", &ngpio);
> +       if (ret) {
> +               dev_err_probe(dev, ret,
> +                         "Missing 'ngpios' property.\n");
> +               return -EINVAL;
> +       }
> +
> +       regmap =3D devm_regmap_init_i2c(client, &ds4520_regmap_config);
> +       if (IS_ERR(regmap)) {
> +               ret =3D PTR_ERR(regmap);
> +               dev_err_probe(dev, ret,
> +                             "Failed to allocate register map\n");
> +               return ret;
> +       }
> +
> +       config.regmap =3D regmap;
> +       config.parent =3D dev;
> +       config.ngpio =3D ngpio;
> +
> +       config.reg_dat_base =3D base + DS4520_IO_STATUS0;
> +       config.reg_set_base =3D base + DS4520_PULLUP0;
> +       config.reg_dir_out_base =3D base + DS4520_IO_CONTROL0;
> +
> +       return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &config));
> +}
> +
> +static const struct of_device_id ds4520_gpio_of_match_table[] =3D {
> +       { .compatible =3D "adi,ds4520-gpio" },
> +       { }
> +};
> +MODULE_DEVICE_TABLE(of, ds4520_gpio_of_match_table);
> +
> +static const struct i2c_device_id ds4520_gpio_id_table[] =3D {
> +       { "ds4520-gpio" },
> +       { }
> +};
> +MODULE_DEVICE_TABLE(i2c, ds4520_gpio_id_table);
> +
> +static struct i2c_driver ds4520_gpio_driver =3D {
> +       .driver =3D {
> +               .name =3D "ds4520-gpio",
> +               .of_match_table =3D ds4520_gpio_of_match_table,
> +       },
> +       .probe_new =3D ds4520_gpio_probe,

I missed this previously but i2c drivers have completed the conversion
to the new probe syntax, so please use regular probe.

And please address Krzysztof's comments as well.

Thanks,
Bart

> +       .id_table =3D ds4520_gpio_id_table,
> +};
> +module_i2c_driver(ds4520_gpio_driver);
> +
> +MODULE_DESCRIPTION("DS4520 I/O Expander");
> +MODULE_AUTHOR("Okan Sahin <okan.sahin@analog.com>");
> +MODULE_LICENSE("GPL");
> --
> 2.30.2
>