Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Ard Biesheuvel <ardb@kernel.org>
To:     linux-efi@vger.kernel.org
Cc:     linux-kernel@vger.kernel.org, Ard Biesheuvel <ardb@kernel.org>,
        Evgeniy Baskov <baskov@ispras.ru>,
        Borislav Petkov <bp@alien8.de>,
        Andy Lutomirski <luto@kernel.org>,
        Dave Hansen <dave.hansen@linux.intel.com>,
        Ingo Molnar <mingo@redhat.com>,
        Peter Zijlstra <peterz@infradead.org>,
        Thomas Gleixner <tglx@linutronix.de>,
        Alexey Khoroshilov <khoroshilov@ispras.ru>,
        Peter Jones <pjones@redhat.com>,
        Gerd Hoffmann <kraxel@redhat.com>,
        Dave Young <dyoung@redhat.com>,
        Mario Limonciello <mario.limonciello@amd.com>,
        Kees Cook <keescook@chromium.org>,
        Tom Lendacky <thomas.lendacky@amd.com>,
        "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>,
        Linus Torvalds <torvalds@linux-foundation.org>,
        Joerg Roedel <jroedel@suse.de>
Subject: [PATCH v7 10/22] x86/decompressor: Use standard calling convention for trampoline
Date:   Fri, 28 Jul 2023 11:09:04 +0200
Message-Id: <20230728090916.1538550-11-ardb@kernel.org>
In-Reply-To: <20230728090916.1538550-1-ardb@kernel.org>
References: <20230728090916.1538550-1-ardb@kernel.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Update the trampoline code so its arguments are passed via RDI and RSI,
which matches the ordinary SysV calling convention for x86_64. This will
allow this code to be called directly from C.

Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
 arch/x86/boot/compressed/head_64.S | 26 +++++++++-----------
 arch/x86/boot/compressed/pgtable.h |  2 +-
 2 files changed, 12 insertions(+), 16 deletions(-)

diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 1892679be2b6897a..491d985be75fd5b0 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -443,9 +443,9 @@ SYM_CODE_START(startup_64)
 	movq	%r15, %rdi		/* pass struct boot_params pointer */
 	call	paging_prepare
 
-	/* Save the trampoline address in RCX */
-	movq	%rax, %rcx
-
+	/* Pass the trampoline address and boolean flag as args #1 and #2 */
+	movq	%rax, %rdi
+	movq	%rdx, %rsi
 	leaq	TRAMPOLINE_32BIT_CODE_OFFSET(%rax), %rax
 	call	*%rax
 
@@ -534,15 +534,15 @@ SYM_FUNC_END(.Lrelocated)
 /*
  * This is the 32-bit trampoline that will be copied over to low memory.
  *
- * ECX contains the base address of the trampoline memory.
- * Non zero RDX means trampoline needs to enable 5-level paging.
+ * EDI contains the base address of the trampoline memory.
+ * Non-zero ESI means trampoline needs to enable 5-level paging.
  */
 SYM_CODE_START(trampoline_32bit_src)
 	/* Grab return address */
 	movq	(%rsp), %rax
 
 	/* Set up 32-bit addressable stack */
-	leaq	TRAMPOLINE_32BIT_STACK_END(%rcx), %rsp
+	leaq	TRAMPOLINE_32BIT_STACK_END(%rdi), %rsp
 
 	/* Preserve return address and other live 64-bit registers */
 	pushq	%rax
@@ -569,7 +569,7 @@ SYM_CODE_START(trampoline_32bit_src)
 	movl	%eax, %cr0
 
 	/* Check what paging mode we want to be in after the trampoline */
-	testl	%edx, %edx
+	testl	%esi, %esi
 	jz	1f
 
 	/* We want 5-level paging: don't touch CR3 if it already points to 5-level page tables */
@@ -584,21 +584,17 @@ SYM_CODE_START(trampoline_32bit_src)
 	jz	3f
 2:
 	/* Point CR3 to the trampoline's new top level page table */
-	leal	TRAMPOLINE_32BIT_PGTABLE_OFFSET(%ecx), %eax
+	leal	TRAMPOLINE_32BIT_PGTABLE_OFFSET(%edi), %eax
 	movl	%eax, %cr3
 3:
 	/* Set EFER.LME=1 as a precaution in case hypervsior pulls the rug */
-	pushl	%ecx
-	pushl	%edx
 	movl	$MSR_EFER, %ecx
 	rdmsr
 	btsl	$_EFER_LME, %eax
 	/* Avoid writing EFER if no change was made (for TDX guest) */
 	jc	1f
 	wrmsr
-1:	popl	%edx
-	popl	%ecx
-
+1:
 #ifdef CONFIG_X86_MCE
 	/*
 	 * Preserve CR4.MCE if the kernel will enable #MC support.
@@ -615,14 +611,14 @@ SYM_CODE_START(trampoline_32bit_src)
 
 	/* Enable PAE and LA57 (if required) paging modes */
 	orl	$X86_CR4_PAE, %eax
-	testl	%edx, %edx
+	testl	%esi, %esi
 	jz	1f
 	orl	$X86_CR4_LA57, %eax
 1:
 	movl	%eax, %cr4
 
 	/* Calculate address of paging_enabled() once we are executing in the trampoline */
-	leal	.Lpaging_enabled - trampoline_32bit_src + TRAMPOLINE_32BIT_CODE_OFFSET(%ecx), %eax
+	leal	.Lpaging_enabled - trampoline_32bit_src + TRAMPOLINE_32BIT_CODE_OFFSET(%edi), %eax
 
 	/* Prepare the stack for far return to Long Mode */
 	pushl	$__KERNEL_CS
diff --git a/arch/x86/boot/compressed/pgtable.h b/arch/x86/boot/compressed/pgtable.h
index 91dbb99203fbce2d..4e8cef135226bcbb 100644
--- a/arch/x86/boot/compressed/pgtable.h
+++ b/arch/x86/boot/compressed/pgtable.h
@@ -14,7 +14,7 @@
 
 extern unsigned long *trampoline_32bit;
 
-extern void trampoline_32bit_src(void *return_ptr);
+extern void trampoline_32bit_src(void *trampoline, bool enable_5lvl);
 
 #endif /* __ASSEMBLER__ */
 #endif /* BOOT_COMPRESSED_PAGETABLE_H */
-- 
2.39.2