Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Javier Martinez Canillas <javierm@redhat.com>
To:     Maya Matuszczyk <maccraft123mc@gmail.com>,
        Heiko Stuebner <heiko@sntech.de>
Cc:     Peter Geis <pgwipeout@gmail.com>, linux-kernel@vger.kernel.org,
        Peter Robinson <pbrobinson@gmail.com>,
        Caleb Connolly <kc@postmarketos.org>,
        Jarrah Gosbell <kernel@undef.tools>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Martijn Braam <martijn@brixit.nl>, Ondrej Jirman <megi@xff.cz>,
        Rob Herring <robh+dt@kernel.org>,
        Tom Fitzhenry <tom@tom-fitzhenry.me.uk>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-rockchip@lists.infradead.org
Subject: Re: [PATCH] arm64: dts: rockchip: Change serial baud rate for
 Pinephone Pro to 1.5 MB
In-Reply-To: <CAO_Mup+JZjUyQK4yC8XwgcRpDU8_TTRJT0rjFQ6OpsEU1BnbJw@mail.gmail.com>
References: <20230403175937.2842085-1-javierm@redhat.com>
 <3797122.KgjxqYA5nG@diego>
 <87pm4kuanl.fsf@minerva.mail-host-address-is-not-set>
 <4495367.TLkxdtWsSY@phil>
 <CAO_Mup+JZjUyQK4yC8XwgcRpDU8_TTRJT0rjFQ6OpsEU1BnbJw@mail.gmail.com>
Date:   Sat, 29 Jul 2023 01:05:34 +0200
Message-ID: <87fs57y6v5.fsf@minerva.mail-host-address-is-not-set>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

Maya Matuszczyk <maccraft123mc@gmail.com> writes:

> Hi Heiko
>
> pt., 28 lip 2023 o 21:00 Heiko Stuebner <heiko@sntech.de> napisa=C5=82(a):
>>

[...]

>> So far people only reported "breaks my setup". I'm in a pickle here ;-) .
>> Without anybody saying "I want to also move into this direction" I really
>> feel I should not merge a patch that breaks other peoples setups.
>
> Well, I'd prefer 1.5M baud rate as it is more consistent with other Rockc=
hip
> boards and it makes for a much more usable terminal experience when
> logged in, it also doesn't affect boot times when serial is enabled with a
> high loglevel and console on serial as 115200 does.
>
> Though I'm just fine with using kernel's cmdline to set a baud rate.
>

Same, but also what Peter mentioned in this thread:

Peter Geis <pgwipeout@gmail.com> writes:
>
> Good Morning Heiko,
>
> The 1.5M baud is default because the clock structure on rockchip
> devices does not allow a clean 115200 baud. By attempting to force
> 115200, it will always be slightly off (either low or high depending
> on how the driver decided to round). If this actually causes any
> problems is the subject of much debate.
>
> Very Respectfully,
> Peter Geis
>

So that's another argument for setting it to 1.5M. Anyways, I'll just stop
asking for this and set my cmdline to a non-default baud rate and move on.

I was just asking in case there was a decision made on this topic.

--=20
Best regards,

Javier Martinez Canillas
Core Platforms
Red Hat