Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Nicolas Ferre <nicolas.ferre@microchip.com>,
        Alexandre Belloni <alexandre.belloni@bootlin.com>,
        Claudiu Beznea <claudiu.beznea@microchip.com>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH] ARM: dts: microchip: split interrupts per cells
Date:   Sun, 30 Jul 2023 13:15:41 +0200
Message-Id: <20230730111542.98238-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Each interrupt should be in its own cell.  This is much more readable.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/microchip/at91rm9200.dtsi  | 12 +++---
 arch/arm/boot/dts/microchip/at91sam9260.dtsi | 12 +++---
 arch/arm/boot/dts/microchip/sama5d2.dtsi     |  6 +--
 arch/arm/boot/dts/microchip/sama7g5.dtsi     | 40 ++++++++++----------
 4 files changed, 35 insertions(+), 35 deletions(-)

diff --git a/arch/arm/boot/dts/microchip/at91rm9200.dtsi b/arch/arm/boot/dts/microchip/at91rm9200.dtsi
index 37b500f6f395..16c675e3a890 100644
--- a/arch/arm/boot/dts/microchip/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/microchip/at91rm9200.dtsi
@@ -135,9 +135,9 @@ tcb0: timer@fffa0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0xfffa0000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
-					      18 IRQ_TYPE_LEVEL_HIGH 0
-					      19 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
 				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
@@ -147,9 +147,9 @@ tcb1: timer@fffa4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0xfffa4000 0x100>;
-				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
-					      21 IRQ_TYPE_LEVEL_HIGH 0
-					      22 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <21 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <22 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&slow_xtal>;
 				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
diff --git a/arch/arm/boot/dts/microchip/at91sam9260.dtsi b/arch/arm/boot/dts/microchip/at91sam9260.dtsi
index 27b4a21f13c1..e56d5546554c 100644
--- a/arch/arm/boot/dts/microchip/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9260.dtsi
@@ -148,9 +148,9 @@ tcb0: timer@fffa0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0xfffa0000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
-					      18 IRQ_TYPE_LEVEL_HIGH 0
-					      19 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
 				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
@@ -160,9 +160,9 @@ tcb1: timer@fffdc000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0xfffdc000 0x100>;
-				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
-					      27 IRQ_TYPE_LEVEL_HIGH 0
-					      28 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <27 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <28 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 28>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
 				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
diff --git a/arch/arm/boot/dts/microchip/sama5d2.dtsi b/arch/arm/boot/dts/microchip/sama5d2.dtsi
index daeeb24e5f4d..5f8e297e19ed 100644
--- a/arch/arm/boot/dts/microchip/sama5d2.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d2.dtsi
@@ -382,9 +382,9 @@ AT91_XDMAC_DT_PERID(21))>,
 			macb0: ethernet@f8008000 {
 				compatible = "atmel,sama5d2-gem";
 				reg = <0xf8008000 0x1000>;
-				interrupts = <5  IRQ_TYPE_LEVEL_HIGH 3		/* Queue 0 */
-					      66 IRQ_TYPE_LEVEL_HIGH 3          /* Queue 1 */
-					      67 IRQ_TYPE_LEVEL_HIGH 3>;        /* Queue 2 */
+				interrupts = <5  IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 0 */
+					     <66 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 1 */
+					     <67 IRQ_TYPE_LEVEL_HIGH 3>;        /* Queue 2 */
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi
index 9642a42d84e6..269e0a3ca269 100644
--- a/arch/arm/boot/dts/microchip/sama7g5.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi
@@ -366,8 +366,8 @@ can0: can@e0828000 {
 			compatible = "bosch,m_can";
 			reg = <0xe0828000 0x100>, <0x100000 0x7800>;
 			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "int0", "int1";
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>;
 			clock-names = "hclk", "cclk";
@@ -382,8 +382,8 @@ can1: can@e082c000 {
 			compatible = "bosch,m_can";
 			reg = <0xe082c000 0x100>, <0x100000 0xbc00>;
 			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "int0", "int1";
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>;
 			clock-names = "hclk", "cclk";
@@ -398,8 +398,8 @@ can2: can@e0830000 {
 			compatible = "bosch,m_can";
 			reg = <0xe0830000 0x100>, <0x100000 0x10000>;
 			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "int0", "int1";
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 63>, <&pmc PMC_TYPE_GCK 63>;
 			clock-names = "hclk", "cclk";
@@ -414,8 +414,8 @@ can3: can@e0834000 {
 			compatible = "bosch,m_can";
 			reg = <0xe0834000 0x100>, <0x110000 0x4400>;
 			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "int0", "int1";
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 64>, <&pmc PMC_TYPE_GCK 64>;
 			clock-names = "hclk", "cclk";
@@ -430,8 +430,8 @@ can4: can@e0838000 {
 			compatible = "bosch,m_can";
 			reg = <0xe0838000 0x100>, <0x110000 0x8800>;
 			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "int0", "int1";
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 65>, <&pmc PMC_TYPE_GCK 65>;
 			clock-names = "hclk", "cclk";
@@ -446,8 +446,8 @@ can5: can@e083c000 {
 			compatible = "bosch,m_can";
 			reg = <0xe083c000 0x100>, <0x110000 0xcc00>;
 			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "int0", "int1";
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>;
 			clock-names = "hclk", "cclk";
@@ -845,12 +845,12 @@ uart7: serial@200 {
 		gmac0: ethernet@e2800000 {
 			compatible = "microchip,sama7g5-gem";
 			reg = <0xe2800000 0x1000>;
-			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>, <&pmc PMC_TYPE_GCK 53>;
 			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
 			assigned-clocks = <&pmc PMC_TYPE_GCK 51>;
@@ -861,8 +861,8 @@ GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH
 		gmac1: ethernet@e2804000 {
 			compatible = "microchip,sama7g5-emac";
 			reg = <0xe2804000 0x1000>;
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>;
 			clock-names = "pclk", "hclk";
 			status = "disabled";
-- 
2.34.1