Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Linus Walleij <linus.walleij@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Patrice Chotard <patrice.chotard@foss.st.com>,
        Maxime Coquelin <mcoquelin.stm32@gmail.com>,
        Alexandre Torgue <alexandre.torgue@foss.st.com>,
        linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        linux-stm32@st-md-mailman.stormreply.com
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v2 2/4] ARM: dts: st: stm32mp157c-emstamp: correct regulator-active-discharge
Date:   Sun, 30 Jul 2023 19:49:52 +0200
Message-Id: <20230730174954.5293-2-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230730174954.5293-1-krzysztof.kozlowski@linaro.org>
References: <20230730174954.5293-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The "regulator-active-discharge" property is uint32, not boolean:

  stm32mp157c-emsbc-argon.dtb: stpmic@33: regulators:pwr_sw1:regulator-active-discharge: True is not of type 'array'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes in v2:
1. None
---
 arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi
index f8e9980ed3d4..009209ca673b 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi
@@ -320,7 +320,7 @@ bst_out: boost {
 			vbus_otg: pwr_sw1 {
 				regulator-name = "vbus_otg";
 				interrupts = <IT_OCP_OTG 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 
 			vbus_usbh: pwr_sw2 {
-- 
2.34.1