Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <79e417ee-ef47-3e4b-6b51-bd7f10ac3643@starfivetech.com>
Date:   Tue, 1 Aug 2023 15:05:46 +0800
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:102.0) Gecko/20100101
 Thunderbird/102.6.1
Subject: Re: [PATCH v1 8/9] PCI: PLDA: starfive: Add JH7110 PCIe controller
Content-Language: en-US
To:     Bjorn Helgaas <helgaas@kernel.org>
CC:     Minda Chen <minda.chen@starfivetech.com>,
        Daire McNamara <daire.mcnamara@microchip.com>,
        Conor Dooley <conor@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Bjorn Helgaas <bhelgaas@google.com>,
        Lorenzo Pieralisi <lpieralisi@kernel.org>,
        =?UTF-8?Q?Krzysztof_Wilczy=c5=84ski?= <kw@linux.com>,
        Emil Renner Berthing <emil.renner.berthing@canonical.com>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-riscv@lists.infradead.org>, <linux-pci@vger.kernel.org>,
        Paul Walmsley <paul.walmsley@sifive.com>,
        "Palmer Dabbelt" <palmer@dabbelt.com>,
        Albert Ou <aou@eecs.berkeley.edu>,
        "Philipp Zabel" <p.zabel@pengutronix.de>,
        Mason Huo <mason.huo@starfivetech.com>,
        Leyfoon Tan <leyfoon.tan@starfivetech.com>,
        Mika Westerberg <mika.westerberg@linux.intel.com>,
        "Maciej W. Rozycki" <macro@orcam.me.uk>,
        =?UTF-8?Q?Pali_Roh=c3=a1r?= <pali@kernel.org>,
        =?UTF-8?Q?Marek_Beh=c3=ban?= <kabel@kernel.org>
References: <20230731231223.GA14721@bhelgaas>
From:   Kevin Xie <kevin.xie@starfivetech.com>
In-Reply-To: <20230731231223.GA14721@bhelgaas>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 2023/8/1 7:12, Bjorn Helgaas wrote:
> [+cc Pali, Marek because I used f76b36d40bee ("PCI: aardvark: Fix link
> training") as an example]
> 
> On Mon, Jul 31, 2023 at 01:52:35PM +0800, Kevin Xie wrote:
>> On 2023/7/28 5:40, Bjorn Helgaas wrote:
>> > On Tue, Jul 25, 2023 at 03:46:35PM -0500, Bjorn Helgaas wrote:
>> >> On Mon, Jul 24, 2023 at 06:48:47PM +0800, Kevin Xie wrote:
>> >> > On 2023/7/21 0:15, Bjorn Helgaas wrote:
>> >> > > On Thu, Jul 20, 2023 at 06:11:59PM +0800, Kevin Xie wrote:
>> >> > >> On 2023/7/20 0:48, Bjorn Helgaas wrote:
>> >> > >> > On Wed, Jul 19, 2023 at 06:20:56PM +0800, Minda Chen wrote:
>> >> > >> >> Add StarFive JH7110 SoC PCIe controller platform
>> >> > >> >> driver codes.
>> >> 
>> >> > >> However, in the compatibility testing with several NVMe SSD, we
>> >> > >> found that Lenovo Thinklife ST8000 NVMe can not get ready in 100ms,
>> >> > >> and it actually needs almost 200ms.  Thus, we increased the T_PVPERL
>> >> > >> value to 300ms for the better device compatibility.
>> >> > > ...
>> >> > > 
>> >> > > Thanks for this valuable information!  This NVMe issue potentially
>> >> > > affects many similar drivers, and we may need a more generic fix so
>> >> > > this device works well with all of them.
>> >> > > 
>> >> > > T_PVPERL is defined to start when power is stable.  Do you have a way
>> >> > > to accurately determine that point?  I'm guessing this:
>> >> > > 
>> >> > >   gpiod_set_value_cansleep(pcie->power_gpio, 1)
>> >> > > 
>> >> > > turns the power on?  But of course that doesn't mean it is instantly
>> >> > > stable.  Maybe your testing is telling you that your driver should
>> >> > > have a hardware-specific 200ms delay to wait for power to become
>> >> > > stable, followed by the standard 100ms for T_PVPERL?
>> >> > 
>> >> > You are right, we did not take the power stable cost into account.
>> >> > T_PVPERL is enough for Lenovo Thinklife ST8000 NVMe SSD to get ready,
>> >> > and the extra cost is from the power circuit of a PCIe to M.2 connector,
>> >> > which is used to verify M.2 SSD with our EVB at early stage.
>> >> 
>> >> Hmm.  That sounds potentially interesting.  I assume you're talking
>> >> about something like this: https://www.amazon.com/dp/B07JKH5VTL
>> >> 
>> >> I'm not familiar with the timing requirements for something like this.
>> >> There is a PCIe M.2 spec with some timing requirements, but I don't
>> >> know whether or how software is supposed to manage this.  There is a
>> >> T_PVPGL (power valid to PERST# inactive) parameter, but it's
>> >> implementation specific, so I don't know what the point of that is.
>> >> And I don't see a way for software to even detect the presence of such
>> >> an adapter.
>> > 
>> > I intended to ask about this on the PCI-SIG forum, but after reading
>> > this thread [1], I don't think we would learn anything.  The question
>> > was:
>> > 
>> >   The M.2 device has 5 voltage rails generated from the 3.3V input
>> >   supply voltage
>> >   -------------------------------------------
>> >   This is re. Table 17 in PCI Express M.2 Specification Revision 1.1
>> >   Power Valid* to PERST# input inactive : Implementation specific;
>> >   recommended 50 ms
>> > 
>> >   What exactly does this mean ?
>> > 
>> >   The Note says
>> > 
>> >     *Power Valid when all the voltage supply rails have reached their
>> >     respective Vmin.
>> > 
>> >   Does this mean that the 50ms to PERSTn is counted from the instant
>> >   when all *5 voltage rails* on the M.2 device have become "good" ?
>> > 
>> > and the answer was:
>> > 
>> >   You wrote;
>> >   Does this mean that the 50ms to PERSTn is counted from the instant
>> >   when all 5 voltage rails on the M.2 device have become "good" ?
>> > 
>> >   Reply:
>> >   This means that counting the recommended 50 ms begins from the time
>> >   when the power rails coming to the device/module, from the host, are
>> >   stable *at the device connector*.
>> > 
>> >   As for the time it takes voltages derived inside the device from any
>> >   of the host power rails (e.g., 3.3V rail) to become stable, that is
>> >   part of the 50ms the host should wait before de-asserting PERST#, in
>> >   order ensure that most devices will be ready by then.
>> > 
>> >   Strictly speaking, nothing disastrous happens if a host violates the
>> >   50ms. If it de-asserts too soon, the device may not be ready, but
>> >   most hosts will try again. If the host de-asserts too late, the
>> >   device has even more time to stabilize. This is why the WG felt that
>> >   an exact minimum number for >>Tpvpgl, was not valid in practice, and
>> >   we made it a recommendation.
>> > 
>> > Since T_PVPGL is implementation-specific, we can't really base
>> > anything in software on the 50ms recommendation.  It sounds to me like
>> > they are counting on software to retry config reads when enumerating.
>> > 
>> > I guess the delays we *can* observe are:
>> > 
>> >   100ms T_PVPERL "Power stable to PERST# inactive" (CEM 2.9.2)
>> >   100ms software delay between reset and config request (Base 6.6.1)
>> 
>> Refer to Figure2-10 in CEM Spec V2.0, I guess this two delays are T2 & T4?
>> In the PATCH v2[4/4], T2 is the msleep(100) for T_PVPERL,
>> and T4 is done by starfive_pcie_host_wait_for_link().
> 
> Yes, I think "T2" is T_PVPERL.  The CEM r2.0 Figure 2-10 note is
> "2. Minimum time from power rails within specified tolerance to
> PERST# inactive (T_PVPERL)."
> 
> As far as T4 ("Minimum PERST# inactive to PCI Express link out of
> electrical idle"), I don't see a name or a value for that parameter,
> and I don't think it is the delay required by PCIe r6.0, sec 6.6.1.
> 
> The delay required by sec 6.6.1 is a minimum of 100ms following exit
> from reset or, for fast links, 100ms after link training completes.
> 
> The comment at the call of advk_pcie_wait_for_link() [2] says it is
> the delay required by sec 6.6.1, but that doesn't seem right to me.
> 
> For one thing, I don't think 6.6.1 says anything about "link up" being
> the end of a delay.  So if we want to do the delay required by 6.6.1,
> "wait_for_link()" doesn't seem like quite the right name.
> 
> For another, all the *_wait_for_link() functions can return success
> after 0ms, 90ms, 180ms, etc.  They're unlikely to return after 0ms,
> but 90ms is quite possible.  If we avoided the 0ms return and
> LINK_WAIT_USLEEP_MIN were 100ms instead of 90ms, that should be enough
> for slow links, where we need 100ms following "exit from reset."
> 
> But it's still not enough for fast links where we need 100ms "after
> link training completes" because we don't know when training
> completed.  If training completed 89ms into *_wait_for_link(), we only
> delay 1ms after that.
> 

That's the point, we will add a extra 100ms after PERST# de-assert
in the patch-v3 according to Base Spec r6.0 - 6.6.1:
        msleep(100);
        gpiod_set_value_cansleep(pcie->reset_gpio, 0);

+       /* As the requirement in PCIe base spec r6.0, system must wait a
+        * minimum of 100 ms following exit from a Conventional Reset
+        * before sending a Configuration Request to the device.*/
+       msleep(100);
+
        if (starfive_pcie_host_wait_for_link(pcie))
                return -EIO;

>> > The PCI core doesn't know how to assert PERST#, so the T_PVPERL delay
>> > definitely has to be in the host controller driver.
>> > 
>> > The PCI core observes the second 100ms delay after a reset in
>> > pci_bridge_wait_for_secondary_bus().  But this 100ms delay does not
>> > happen during initial enumeration.  I think the assumption of the PCI
>> > core is that when the host controller driver calls pci_host_probe(),
>> > we can issue config requests immediately.
>> > 
>> > So I think that to be safe, we probably need to do both of those 100ms
>> > delays in the host controller driver.  Maybe there's some hope of
>> > supporting the latter one in the PCI core someday, but that's not
>> > today.
>> > 
>> > Bjorn
>> > 
>> > [1] https://forum.pcisig.com/viewtopic.php?f=74&t=1037
> 
> [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/pci/controller/pci-aardvark.c?id=v6.4#n433