Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Zhangjin Wu <falcon@tinylab.org>
To:     thomas@t-8ch.de
Cc:     falcon@tinylab.org, arnd@arndb.de, linux-kernel@vger.kernel.org,
        linux-kselftest@vger.kernel.org, w@1wt.eu
Subject: [PATCH v4 04/12] selftests/nolibc: add macros to reduce duplicated changes
Date:   Wed,  2 Aug 2023 03:40:21 +0800
Message-Id: <d18c46b935f2c7d56a8857b387067cb3fec11d05.1690916314.git.falcon@tinylab.org>
In-Reply-To: <cover.1690916314.git.falcon@tinylab.org>
References: <cover.1690916314.git.falcon@tinylab.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Feedback-ID: bizesmtp:tinylab.org:qybglogicsvrgz:qybglogicsvrgz5a-1
Precedence: bulk

The kernel targets share the same kernel make operations, the same
.config file, the same kernel image, add MAKE_KERNEL, KERNEL_CONFIG and
KERNEL_IMAGE for them.

Many targets use the same log file, add RUN_OUT to allow save log by
architecture, for example: 'make RUN_OUT=$PWD/run.$arch.out'.

The qemu run/rerun targets share the same qemu system run command, add
QEMU_SYSTEM_RUN for them.

Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230722122009.GE17311@1wt.eu/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
---
 tools/testing/selftests/nolibc/Makefile | 35 ++++++++++++++++---------
 1 file changed, 23 insertions(+), 12 deletions(-)

diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile
index f0bda0d28000..fdc72ca75589 100644
--- a/tools/testing/selftests/nolibc/Makefile
+++ b/tools/testing/selftests/nolibc/Makefile
@@ -142,41 +142,52 @@ endif
 libc-test: nolibc-test.c
 	$(QUIET_CC)$(CC) -o $@ $<
 
+# common macros for logging
+RUN_OUT = $(CURDIR)/run.out
+
 # local libc-test
 run-libc-test: libc-test
-	$(Q)./libc-test > "$(CURDIR)/run.out" || :
-	$(Q)$(REPORT) $(CURDIR)/run.out
+	$(Q)./libc-test > "$(RUN_OUT)" || :
+	$(Q)$(REPORT) "$(RUN_OUT)"
 
 # local nolibc-test
 run-nolibc-test: nolibc-test
-	$(Q)./nolibc-test > "$(CURDIR)/run.out" || :
-	$(Q)$(REPORT) $(CURDIR)/run.out
+	$(Q)./nolibc-test > "$(RUN_OUT)" || :
+	$(Q)$(REPORT) "$(RUN_OUT)"
 
 # qemu user-land test
 run-user: nolibc-test
-	$(Q)qemu-$(QEMU_ARCH) ./nolibc-test > "$(CURDIR)/run.out" || :
-	$(Q)$(REPORT) $(CURDIR)/run.out
+	$(Q)qemu-$(QEMU_ARCH) ./nolibc-test > "$(RUN_OUT)" || :
+	$(Q)$(REPORT) "$(RUN_OUT)"
 
 initramfs: nolibc-test
 	$(QUIET_MKDIR)mkdir -p initramfs
 	$(call QUIET_INSTALL, initramfs/init)
 	$(Q)cp nolibc-test initramfs/init
 
+# common macros for kernel targets
+MAKE_KERNEL   = $(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE)
+KERNEL_CONFIG = $(objtree)/.config
+KERNEL_IMAGE  = $(objtree)/$(IMAGE)
+
 defconfig:
-	$(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) mrproper $(DEFCONFIG) prepare
+	$(Q)$(MAKE_KERNEL) mrproper $(DEFCONFIG) prepare
 
 kernel: initramfs
-	$(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) $(IMAGE_NAME) CONFIG_INITRAMFS_SOURCE=$(CURDIR)/initramfs
+	$(Q)$(MAKE_KERNEL) $(IMAGE_NAME) CONFIG_INITRAMFS_SOURCE=$(CURDIR)/initramfs
+
+# common macros for qemu run/rerun targets
+QEMU_SYSTEM_RUN = qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(KERNEL_IMAGE)" -serial stdio $(QEMU_ARGS)
 
 # run the tests after building the kernel
 run: kernel
-	$(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(objtree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out"
-	$(Q)$(REPORT) $(CURDIR)/run.out
+	$(Q)$(QEMU_SYSTEM_RUN) > "$(RUN_OUT)"
+	$(Q)$(REPORT) "$(RUN_OUT)"
 
 # re-run the tests from an existing kernel
 rerun:
-	$(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(objtree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out"
-	$(Q)$(REPORT) $(CURDIR)/run.out
+	$(Q)$(QEMU_SYSTEM_RUN) > "$(RUN_OUT)"
+	$(Q)$(REPORT) "$(RUN_OUT)"
 
 clean:
 	$(call QUIET_CLEAN, sysroot)
-- 
2.25.1