Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <ee725687-1b1a-3fdb-8aee-5ca49f59a874@ti.com>
Date:   Wed, 2 Aug 2023 13:09:12 +0530
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.11.0
Subject: Re: [PATCH 3/5] arm64: dts: ti: k3-am62a7-sk: Drop i2c-1 to 100Khz
Content-Language: en-US
To:     Jai Luthra <j-luthra@ti.com>, Nishanth Menon <nm@ti.com>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Tero Kristo <kristo@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Catalin Marinas <catalin.marinas@arm.com>,
        Will Deacon <will@kernel.org>
CC:     <linux-arm-kernel@lists.infradead.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
References: <20230731-mcasp_am62a-v1-0-8bd137ffa8f1@ti.com>
 <20230731-mcasp_am62a-v1-3-8bd137ffa8f1@ti.com>
From:   Devarsh Thakkar <devarsht@ti.com>
In-Reply-To: <20230731-mcasp_am62a-v1-3-8bd137ffa8f1@ti.com>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 31/07/23 18:14, Jai Luthra wrote:
> The TLV320AIC3106 audio codec is interfaced on the i2c-1 bus. With the
> default rate of 400Khz the i2c register writes fail to sync:
> 
> [   36.026387] tlv320aic3x 1-001b: Unable to sync registers 0x16-0x16. -110
> [   38.101130] omap_i2c 20010000.i2c: controller timed out
> 
> Dropping the rate to 100Khz fixes the issue.
> 
> Signed-off-by: Jai Luthra <j-luthra@ti.com>

Reviewed-by: Devarsh Thakkar <devarsht@ti.com>

> ---
>  arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> index 9d34b8fe4ecb..752c2f640f63 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> @@ -338,7 +338,7 @@ &main_i2c1 {
>  	status = "okay";
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&main_i2c1_pins_default>;
> -	clock-frequency = <400000>;
> +	clock-frequency = <100000>;
>  
>  	exp1: gpio@22 {
>  		compatible = "ti,tca6424";