Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Wed, 2 Aug 2023 18:33:54 -0600
From:   Rob Herring <robh@kernel.org>
To:     TY Chang <tychang@realtek.com>
Cc:     Linus Walleij <linus.walleij@linaro.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>, linux-gpio@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 5/7] dt-bindings: pinctrl: realtek: add RTD1315E pinctrl
 binding
Message-ID: <20230803003354.GA1586526-robh@kernel.org>
References: <20230726090409.16606-1-tychang@realtek.com>
 <20230726090409.16606-6-tychang@realtek.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20230726090409.16606-6-tychang@realtek.com>
Precedence: bulk

On Wed, Jul 26, 2023 at 05:04:07PM +0800, TY Chang wrote:
> Add device tree bindings for RTD1315E.
> 
> Signed-off-by: TY Chang <tychang@realtek.com>
> ---
>  .../pinctrl/realtek,rtd1315e-pinctrl.yaml     | 165 ++++++++++++++++++
>  1 file changed, 165 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml
> new file mode 100644
> index 000000000000..b8fb6335ed65
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml
> @@ -0,0 +1,165 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2023 Realtek Semiconductor Corporation
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/realtek,rtd1315e-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Realtek DHC RTD1315E Pin Controller
> +
> +maintainers:
> +  - TY Chang <tychang@realtek.com>
> +
> +description: |
> +  Binding for Realtek DHC RTD1315E SoC pin control.
> +
> +properties:
> +  compatible:
> +    const: realtek,rtd13xxe-pinctrl

Don't use wildcards in compatible strings.

> +
> +  reg:
> +    maxItems: 1
> +
> +patternProperties:
> +  '^.*$':
> +    if:
> +      type: object

For new bindings, define a suffix (e.g. "-pins") for the node name. 

> +    then:
> +      allOf:
> +        - $ref: pincfg-node.yaml#
> +        - $ref: pinmux-node.yaml#
> +
> +      properties:
> +        pins:
> +          items:
> +            enum: [ gpio_0, gpio_1, emmc_rst_n, emmc_dd_sb, emmc_clk, emmc_cmd,
> +                    gpio_6, gpio_7, gpio_8, gpio_9, gpio_10, gpio_11, gpio_12,
> +                    gpio_13, gpio_14, gpio_15, gpio_16, gpio_17, gpio_18, gpio_19,
> +                    gpio_20, emmc_data_0, emmc_data_1, emmc_data_2, usb_cc2, gpio_25,
> +                    gpio_26, gpio_27, gpio_28, gpio_29, gpio_30, gpio_31, gpio_32,
> +                    gpio_33, gpio_34, gpio_35, hif_data, hif_en, hif_rdy, hif_clk,
> +                    gpio_dummy_40, gpio_dummy_41, gpio_dummy_42, gpio_dummy_43,
> +                    gpio_dummy_44, gpio_dummy_45, gpio_46, gpio_47, gpio_48, gpio_49,
> +                    gpio_50, usb_cc1, emmc_data_3, emmc_data_4, ir_rx, ur0_rx, ur0_tx,
> +                    gpio_57, gpio_58, gpio_59, gpio_60, gpio_61, gpio_62, gpio_dummy_63,
> +                    gpio_dummy_64, gpio_dummy_65, gpio_66, gpio_67, gpio_68, gpio_69,
> +                    gpio_70, gpio_71, gpio_72, gpio_dummy_73, emmc_data_5, emmc_data_6,
> +                    emmc_data_7, gpio_dummy_77, gpio_78, gpio_79, gpio_80, gpio_81,
> +                    ur2_loc, gspi_loc, hi_width, sf_en, arm_trace_dbg_en,
> +                    ejtag_aucpu_loc, ejtag_acpu_loc, ejtag_vcpu_loc, ejtag_scpu_loc,
> +                    dmic_loc, vtc_dmic_loc, vtc_tdm_loc, vtc_i2si_loc, tdm_ai_loc,
> +                    ai_loc, spdif_loc, hif_en_loc, scan_switch, wd_rset, boot_sel,
> +                    reset_n, testmode ]
> +
> +        function:
> +          enum: [ gpio, nf, emmc, ao, gspi_loc0, gspi_loc1, uart0, uart1,
> +                  uart2_loc0, uart2_loc1, i2c0, i2c1, i2c4, i2c5, pcie1,
> +                  etn_led, etn_phy, spi, pwm0_loc0, pwm0_loc1, pwm1_loc0,
> +                  pwm1_loc1, pwm2_loc0, pwm2_loc1, pwm3_loc0, pwm3_loc1,
> +                  spdif_optical_loc0, spdif_optical_loc1, usb_cc1, usb_cc2,
> +                  sd, dmic_loc0, dmic_loc1, ai_loc0, ai_loc1, tdm_ai_loc0,
> +                  tdm_ai_loc1, hi_loc0, hi_m, vtc_i2so, vtc_i2si_loc0,
> +                  vtc_i2si_loc1, vtc_dmic_loc0, vtc_dmic_loc1, vtc_tdm_loc0,
> +                  vtc_tdm_loc1, dc_fan, pll_test_loc0, pll_test_loc1,
> +                  ir_rx, uart2_disable, gspi_disable, hi_width_disable,
> +                  hi_width_1bit, sf_disable, sf_enable, scpu_ejtag_loc0,
> +                  scpu_ejtag_loc1, scpu_ejtag_loc2, scpu_ejtag_loc3,
> +                  acpu_ejtag_loc0, acpu_ejtag_loc1, acpu_ejtag_loc2,
> +                  vcpu_ejtag_loc0, vcpu_ejtag_loc1, vcpu_ejtag_loc2,
> +                  aucpu_ejtag_loc0, aucpu_ejtag_loc1, aucpu_ejtag_loc2,
> +                  gpu_ejtag, iso_tristate, dbg_out0, dbg_out1, standby_dbg,
> +                  spdif, arm_trace_debug_disable, arm_trace_debug_enable,
> +                  aucpu_ejtag_disable, acpu_ejtag_disable, vcpu_ejtag_disable,
> +                  scpu_ejtag_disable, vtc_dmic_loc_disable, vtc_tdm_disable,
> +                  vtc_i2si_disable, tdm_ai_disable, ai_disable, spdif_disable,
> +                  hif_disable, hif_enable, test_loop, pmic_pwrup ]
> +
> +
> +        drive-strength:
> +          enum: [4, 8]
> +
> +        bias-pull-down: true
> +
> +        bias-pull-up: true
> +
> +        bias-disable: true
> +
> +        input-schmitt-enable: true
> +
> +        input-schmitt-disable: true
> +
> +        drive-push-pull: true
> +
> +        power-source:
> +          description: |
> +            Valid arguments are described as below:
> +            0: power supply of 1.8V
> +            1: power supply of 3.3V
> +          enum: [0, 1]
> +
> +        realtek,pdrive:
> +          description: |
> +            An integer describing the level to adjust PMOS output driving capability.
> +          $ref: /schemas/types.yaml#/definitions/uint32
> +          minimum: 0
> +          maximum: 7
> +
> +        realtek,ndrive:
> +          description: |
> +            An integer describing the level to adjust NMOS output driving capability.
> +          $ref: /schemas/types.yaml#/definitions/uint32
> +          minimum: 0
> +          maximum: 7
> +
> +        realtek,dcycle:
> +          description: |
> +            An integer describing the level to adjust output duty cycle.
> +            Valid arguments are described as below:
> +            0: 0ns
> +            2: + 0.25ns
> +            3: + 0.5ns
> +            4: -0.25ns
> +            5: -0.5ns
> +          $ref: /schemas/types.yaml#/definitions/uint32
> +          enum: [ 0, 2, 3, 4, 5 ]
> +
> +      required:
> +        - pins
> +
> +      additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +     pinctrl@4e000 {
> +         compatible = "realtek,rtd13xxe-pinctrl";
> +         reg = <0x4e000 0x130>;
> +
> +         emmc_pins_hs200 {

Don't use '_' in node names.

> +             pins = "emmc_clk",
> +                    "emmc_cmd",
> +                    "emmc_data_0",
> +                    "emmc_data_1",
> +                    "emmc_data_2",
> +                    "emmc_data_3",
> +                    "emmc_data_4",
> +                    "emmc_data_5",
> +                    "emmc_data_6",
> +                    "emmc_data_7";
> +             function = "emmc";
> +             realtek,pdrive = <0x2>;
> +             realtek,ndrive = <0x2>;
> +         };
> +
> +         i2c_pins_0 {
> +             pins = "gpio_12",
> +                    "gpio_13";
> +             function = "i2c0";
> +             drive-strength = <4>;
> +         };
> +     };
> -- 
> 2.41.0
>