Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Dhruva Gole <d-gole@ti.com>
To:     Nishanth Menon <nm@ti.com>, Tero Kristo <kristo@kernel.org>,
        "Santosh Shilimkar" <ssantosh@kernel.org>
CC:     <linux-pm@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-omap@vger.kernel.org>,
        "Kevin Hilman" <khilman@baylibre.com>, Vignesh R <vigneshr@ti.com>,
        Dhruva Gole <d-gole@ti.com>, Dave Gerlach <d-gerlach@ti.com>,
        Vibhore Vardhan <vibhore@ti.com>, Georgi Vlaev <g-vlaev@ti.com>
Subject: [PATCH V7 4/4] firmware: ti_sci: Add system suspend call
Date:   Fri, 4 Aug 2023 17:20:37 +0530
Message-ID: <20230804115037.754994-5-d-gole@ti.com>
In-Reply-To: <20230804115037.754994-1-d-gole@ti.com>
References: <20230804115037.754994-1-d-gole@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Introduce system suspend call that enables the ti_sci driver to support
deep sleep low power mode when the user space issues a suspend to mem.

Also, write a ti_sci_prepare_system_suspend call to be used in the driver
suspend handler to allow the system to identify the low power mode being
entered and if necessary, send TISCI_MSG_PREPARE_SLEEP with information
about the mode is being entered and the address for allocated memory for
storing the context during Deep Sleep.

We're using "pm_suspend_target_state" to map the kernel's target suspend
state to SysFW low power mode. Make sure this is available only when
CONFIG_SUSPEND is enabled.

Co-developed-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Georgi Vlaev <g-vlaev@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
---

changelog:

We no longer need to do anything special during resume, hence remove the
resume call

 drivers/firmware/ti_sci.c | 45 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index 512338699153..9584015f2b19 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -22,6 +22,7 @@
 #include <linux/slab.h>
 #include <linux/soc/ti/ti-msgmgr.h>
 #include <linux/soc/ti/ti_sci_protocol.h>
+#include <linux/suspend.h>
 #include <linux/sys_soc.h>
 #include <linux/reboot.h>
 
@@ -3433,6 +3434,49 @@ static int tisci_reboot_handler(struct notifier_block *nb, unsigned long mode,
 	return NOTIFY_BAD;
 }
 
+static int ti_sci_prepare_system_suspend(struct ti_sci_info *info)
+{
+#if IS_ENABLED(CONFIG_SUSPEND)
+	u8 mode;
+
+	/* Map and validate the target Linux suspend state to TISCI LPM. */
+	switch (pm_suspend_target_state) {
+	case PM_SUSPEND_MEM:
+		/* S2MEM is not supported by the firmware. */
+		if (!(info->fw_caps & MSG_FLAG_CAPS_LPM_DEEP_SLEEP))
+			return 0;
+		mode = TISCI_MSG_VALUE_SLEEP_MODE_DEEP_SLEEP;
+		break;
+	default:
+		/*
+		 * Do not fail if we don't have action to take for a
+		 * specific suspend mode.
+		 */
+		return 0;
+	}
+
+	return ti_sci_cmd_prepare_sleep(&info->handle, mode,
+					(u32)(info->ctx_mem_addr & 0xffffffff),
+					(u32)((u64)info->ctx_mem_addr >> 32), 0);
+#else
+	return 0;
+#endif
+}
+
+static int ti_sci_suspend(struct device *dev)
+{
+	struct ti_sci_info *info = dev_get_drvdata(dev);
+	int ret;
+
+	ret = ti_sci_prepare_system_suspend(info);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(ti_sci_pm_ops, ti_sci_suspend, NULL);
+
 static int ti_sci_init_suspend(struct platform_device *pdev,
 			       struct ti_sci_info *info)
 {
@@ -3673,6 +3717,7 @@ static struct platform_driver ti_sci_driver = {
 	.driver = {
 		   .name = "ti-sci",
 		   .of_match_table = of_match_ptr(ti_sci_of_match),
+		   .pm = &ti_sci_pm_ops,
 	},
 };
 module_platform_driver(ti_sci_driver);
-- 
2.34.1