Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Sat, 5 Aug 2023 10:34:27 +0530
From:   Dhruva Gole <d-gole@ti.com>
To:     Tony Lindgren <tony@atomide.com>
CC:     Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Jiri Slaby <jirislaby@kernel.org>,
        Andy Shevchenko <andriy.shevchenko@intel.com>,
        Ilpo =?utf-8?B?SsOkcnZpbmVu?= <ilpo.jarvinen@linux.intel.com>,
        John Ogness <john.ogness@linutronix.de>,
        Johan Hovold <johan@kernel.org>,
        Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        <linux-kernel@vger.kernel.org>, <linux-serial@vger.kernel.org>
Subject: Re: [PATCH] serial: 8250: Fix oops for port->pm on uart_change_pm()
Message-ID: <20230805050427.tj4ya7w3a3nzc2dp@dhruva>
References: <20230804131553.52927-1-tony@atomide.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: inline
In-Reply-To: <20230804131553.52927-1-tony@atomide.com>
Precedence: bulk

On Aug 04, 2023 at 16:15:51 +0300, Tony Lindgren wrote:
> Unloading a hardware specific 8250 driver can produce error "Unable to
> handle kernel paging request at virtual address" about ten seconds after
> unloading the driver. This happens on uart_hangup() calling
> uart_change_pm().
> 
> Turns out commit 04e82793f068 ("serial: 8250: Reinit port->pm on port
> specific driver unbind") was only a partial fix. If the hardware specific
> driver has initialized port->pm function, we need to clear port->pm too.
> Just reinitializing port->ops does not do this. Otherwise serial8250_pm()
> will call port->pm() instead of serial8250_do_pm().

Thanks for catching and fixing this!

> 
> Fixes: 04e82793f068 ("serial: 8250: Reinit port->pm on port specific driver unbind")
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
>  drivers/tty/serial/8250/8250_port.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
> --- a/drivers/tty/serial/8250/8250_port.c
> +++ b/drivers/tty/serial/8250/8250_port.c
> @@ -3278,6 +3278,7 @@ void serial8250_init_port(struct uart_8250_port *up)
>  
>  	spin_lock_init(&port->lock);
>  	port->ctrl_id = 0;
> +	port->pm = NULL;

Reviewed-by: Dhruva Gole <d-gole@ti.com>

>  	port->ops = &serial8250_pops;
>  	port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE);
>  
> -- 
> 2.41.0

-- 
Best regards,
Dhruva Gole <d-gole@ti.com>