Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Jernej =?utf-8?B?xaBrcmFiZWM=?= <jernej.skrabec@gmail.com>
To:     Maxime Ripard <mripard@kernel.org>,
        Michael Turquette <mturquette@baylibre.com>,
        Stephen Boyd <sboyd@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
        Samuel Holland <samuel@sholland.org>,
        Andre Przywara <andre.przywara@arm.com>,
        Roman Beranek <me@crly.cz>, Frank Oltmanns <frank@oltmanns.dev>
Cc:     linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
        Frank Oltmanns <frank@oltmanns.dev>
Subject: Re: [PATCH v5 03/11] clk: sunxi-ng: a64: allow pll-mipi to set parent's rate
Date:   Sun, 06 Aug 2023 15:32:43 +0200
Message-ID: <9144277.CDJkKcVGEf@jernej-laptop>
In-Reply-To: <20230806-pll-mipi_set_rate_parent-v5-3-db4f5ca33fc3@oltmanns.dev>
References: <20230806-pll-mipi_set_rate_parent-v5-0-db4f5ca33fc3@oltmanns.dev>
 <20230806-pll-mipi_set_rate_parent-v5-3-db4f5ca33fc3@oltmanns.dev>
MIME-Version: 1.0
Content-Transfer-Encoding: 7Bit
Content-Type: text/plain; charset="us-ascii"
Precedence: bulk

Dne nedelja, 06. avgust 2023 ob 15:06:48 CEST je Frank Oltmanns napisal(a):
> The nkm clock now supports setting the parent's rate. Utilize this
> option to find the optimal rate for pll-mipi.
> 
> Acked-by: Maxime Ripard <mripard@kernel.org>
> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej

> ---
>  drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c index 41519185600a..a139a5c438d4
> 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> @@ -179,7 +179,8 @@ static struct ccu_nkm pll_mipi_clk = {
>  	.common		= {
>  		.reg		= 0x040,
>  		.hw.init	= CLK_HW_INIT("pll-mipi", "pll-video0",
> -					      &ccu_nkm_ops, 
CLK_SET_RATE_UNGATE),
> +					      &ccu_nkm_ops,
> +					      
CLK_SET_RATE_UNGATE | CLK_SET_RATE_PARENT),
>  	},
>  };