Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <ca0a7c5c-d098-743b-eee4-fa341b10c6a8@ti.com>
Date:   Mon, 7 Aug 2023 10:34:40 -0500
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.13.0
Subject: Re: [PATCH 12/13] arm64: dts: ti: k3-am65: Enable TSCADC nodes at the
 board level
Content-Language: en-US
To:     Dhruva Gole <d-gole@ti.com>, Nishanth Menon <nm@ti.com>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Tero Kristo <kristo@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        <linux-arm-kernel@lists.infradead.org>
CC:     <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
References: <20230802205309.257392-1-afd@ti.com>
 <20230802205309.257392-13-afd@ti.com>
 <cd8352a9-6ab4-dbcc-1bee-8ad76e6b3004@ti.com>
From:   Andrew Davis <afd@ti.com>
In-Reply-To: <cd8352a9-6ab4-dbcc-1bee-8ad76e6b3004@ti.com>
Content-Type: text/plain; charset="UTF-8"; format=flowed
Content-Transfer-Encoding: 8bit
Precedence: bulk

On 8/7/23 12:51 AM, Dhruva Gole wrote:
> Andrew,
> 
> On 03/08/23 02:23, Andrew Davis wrote:
>> TSCADC nodes defined in the top-level AM65 SoC dtsi files are incomplete
>> and may not be functional unless they are extended with pinmux and/or
>> device information.
>>
>> Disable the TSCADC nodes in the dtsi files and only enable the ones that
>> are actually pinned out on a given board.
>>
>> Signed-off-by: Andrew Davis <afd@ti.com>
>> ---
>>   arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 5 +----
>>   arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi            | 2 ++
>>   arch/arm64/boot/dts/ti/k3-am654-base-board.dts     | 2 ++
>>   3 files changed, 5 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
>> index 6041862d5aa75..ba1c14a54acf4 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
>> @@ -582,11 +582,8 @@ &mcu_spi0 {
>>       ti,pindir-d0-out-d1-in;
>>   };
>> -&tscadc0 {
>> -    status = "disabled";
>> -};
>> -
>>   &tscadc1 {
>> +    status = "okay";
> 
> The commit body says,
> "Disable the TSCADC nodes in the dtsi files"
> 
> Please can we also provide some explanation on why
> tscadc1 was left as okay here in a dtsi file?
> 

Same reasoning as in my response for patch [4/13], the node
is complete at this point, so we enable it here.

The commit message is a bit off given these boards do their
pinmuxing in the .dtsi files, not at the last level .dts files
like most boards, but I kept the commit message consistent for
the whole series as this is a rare exception case. I can change
the message wording if you would like.

Andrew

>>       adc {
>>           ti,adc-channels = <0 1 2 3 4 5>;
>>       };
>> diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
>> index 2c9c20a9d9179..4defde540fe0b 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
>> @@ -112,6 +112,7 @@ tscadc0: tscadc@40200000 {
>>           dmas = <&mcu_udmap 0x7100>,
>>               <&mcu_udmap 0x7101 >;
>>           dma-names = "fifo0", "fifo1";
>> +        status = "disabled";
>>           adc {
>>               #io-channel-cells = <1>;
>> @@ -130,6 +131,7 @@ tscadc1: tscadc@40210000 {
>>           dmas = <&mcu_udmap 0x7102>,
>>               <&mcu_udmap 0x7103>;
>>           dma-names = "fifo0", "fifo1";
>> +        status = "disabled";
>>           adc {
>>               #io-channel-cells = <1>;
>> diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
>> index 43de7c132d343..17f45a9f7b146 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
>> @@ -478,12 +478,14 @@ &usb0_phy {
>>   };
>>   &tscadc0 {
>> +    status = "okay";
>>       adc {
>>           ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>       };
>>   };
>>   &tscadc1 {
>> +    status = "okay";
>>       adc {
>>           ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>       };
>