Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Atul Pant <quic_atulpant@quicinc.com>
To:     rafael@kernel.org, daniel.lezcano@linaro.org, mingo@redhat.com,
        peterz@infradead.org, juri.lelli@redhat.com,
        vincent.guittot@linaro.org, dietmar.eggemann@arm.com,
        rostedt@goodmis.org, bsegall@google.com, mgorman@suse.de,
        bristot@redhat.com, vschneid@redhat.com
Cc:     Atul Pant <quic_atulpant@quicinc.com>, linux-pm@vger.kernel.org,
        linux-kernel@vger.kernel.org, quic_ashayj@quicinc.com,
        quic_rgottimu@quicinc.com, quic_shashim@quicinc.com
Subject: Prevent RT-throttling for idle-injection threads
Date:   Tue,  8 Aug 2023 16:55:23 +0530
Message-Id: <20230808112523.2788452-1-quic_atulpant@quicinc.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Hi all,
We are trying to implement a solution for thermal mitigation by using idle injection on CPUs. However we face some limitations with the current idle-inject framework.
As per our need, we want to start injecting idle cycles on a CPU for indefinite time (until the temperature/power of the CPU falls below a threshold). This will help
to keep the hot CPUs in the sleep state until we see improvement in temperature/power. If we set the idle duration to a large value or have an idle-injection ratio of 100%,
then the idle-inject RT thread suffers from RT throttling. This results in the CPU exiting from the sleep state and consuming some power.

The above situation can be avoided, if we can prevent RT throttling on the injected CPU. With the currently available sysctl parameters, sched_rt_runtime_us and sched_rt_period_us,
we can prevent RT throttling by either setting sched_rt_runtime_us equal to sched_rt_period_us or, setting sched_rt_runtime_us to -1. Since these parameters are system wide,
so it will affect the RT tasks on non idle-injected CPUs as well. To overcome this, will it be feasible to have these two parameters on a per CPU basis? This will allow to selectively
disable RT throttling on idle-injected CPUs.


Thanks & Regards
Atul