Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Apurva Nandan <a-nandan@ti.com>
To:     Apurva Nandan <a-nandan@ti.com>, Nishanth Menon <nm@ti.com>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Tero Kristo <kristo@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Rafael J Wysocki <rafael@kernel.org>,
        Daniel Lezcano <daniel.lezcano@linaro.org>,
        Amit Kucheria <amitk@kernel.org>,
        Zhang Rui <rui.zhang@intel.com>,
        <linux-arm-kernel@lists.infradead.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-pm@vger.kernel.org>, Udit Kumar <u-kumar1@ti.com>,
        Keerthy J <j-keerthy@ti.com>
Subject: [PATCH 3/3] arm64: dts: ti: k3-j7200-thermal: Add cooling maps and cpu_alert trip at 75C
Date:   Wed, 9 Aug 2023 23:09:05 +0530
Message-ID: <20230809173905.1844132-4-a-nandan@ti.com>
In-Reply-To: <20230809173905.1844132-1-a-nandan@ti.com>
References: <20230809173905.1844132-1-a-nandan@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

From: Keerthy <j-keerthy@ti.com>

Add cooling maps and mpu_alert trip at 75C

Note: mpu_alert trip value should adjusted based on the system load and
performance needs.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi
index e7e3a643a6f0..eeb596727d48 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi
@@ -28,6 +28,20 @@ mpu_crit: mpu-crit {
 				hysteresis = <2000>; /* milliCelsius */
 				type = "critical";
 			};
+
+			mpu_alert0: mpu_alert {
+				temperature = <75000>; /* millicelsius */
+				hysteresis = <5000>; /* millicelsius */
+				type = "passive";
+			};
+		};
+
+		cpu_cooling_maps: cooling-maps {
+			map0 {
+				trip = <&mpu_alert0>;
+				cooling-device =
+				<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
 		};
 	};
 
-- 
2.34.1