Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   John Watts <contact@jookia.org>
To:     alsa-devel@alsa-project.org
Cc:     Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Jaroslav Kysela <perex@perex.cz>,
        Takashi Iwai <tiwai@suse.com>, John Watts <contact@jookia.org>,
        patches@opensource.cirrus.com, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH 0/3] ASoC: wm8782: Allow higher audio rates
Date:   Fri, 11 Aug 2023 08:49:27 +1000
Message-ID: <20230810224930.3216717-1-contact@jookia.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The wm8782 supports higher audio rates than just 48kHz. This is
configured by setting the FSAMPEN pin on the codec chip.

This patch series introduces the 'max-rate' device tree property
to allow indicating which rates are fully supported by the codec
without accidentally overclocking.

John Watts (3):
  ASoC: wm8782: Handle maximum audio rate at runtime
  ASoC: wm8782: Use max-rate device tree property
  ASoC: dt-bindings: wlf,wm8782: Add max-rate property

 .../devicetree/bindings/sound/wm8782.txt      |  2 +
 sound/soc/codecs/wm8782.c                     | 49 ++++++++++++++-----
 2 files changed, 39 insertions(+), 12 deletions(-)

-- 
2.41.0